↑↓ selectEnter openEsc close

    1. Elbuz
    2. EU e-invoices

    How to issue FatturaPA e-invoices for Italy in Elbuz

    5 min readUpdated

    Elbuz builds a FatturaPA file from a sales invoice or an invoice and e-mails it to the state system SdI from your company's PEC mailbox. No intermediary or accreditation needed. SdI receipts and incoming invoices are read from the same mailbox.

    When you need this:

    • Your Italian company sells to businesses or consumers — the invoice goes from the document card or on posting.
    • You use the forfettario regime — all lines go VAT-free, and Elbuz adds the €2 stamp duty mark if the checkbox is on.
    • Suppliers send you invoices through SdI — they become purchase invoices.

    Where to start: “Directories” → “Documents” → “E-invoices (EU)” → “FatturaPA (Italy)”.

    What the FatturaPA connection does

    Elbuz does not issue invoices to public bodies (the FPA12 format with a digital signature): only invoices to businesses and consumers.

    How to connect your company

    1. Open the “E-invoices (EU)” window and click “FatturaPA (Italy)”.
    2. Select the company and enter the Partita IVA (11 digits), plus the codice fiscale if it is different.
    3. Set the tax regime and the two-letter province code.
    4. Enter the PEC address and password. If the server fields are empty, servers for Aruba, Legalmail, Poste and Register addresses are filled in on saving. For your own domain, take them from your provider's settings.
    5. Save. Elbuz immediately tries to read the mailbox and shows the result. The outgoing (SMTP) server is not checked this way: an error there shows up on the first send.
    FatturaPA (Italy) connection form in the E-invoices (EU) window
    1Company and Partita IVA
    2Company PEC mailbox
    3Stamp duty, incoming invoices, auto-send options
    1. Company and Partita IVA — the Italian company that issues the invoices.
    2. Company PEC mailbox — address, password and SMTP/IMAP servers that Elbuz uses to talk to SdI.
    3. Options — €2 stamp duty, receiving incoming invoices from PEC and automatic sending when an invoice is posted.

    The password is stored encrypted. If you change the PEC address, login or server, you have to enter the password again, so that it never goes to someone else's server.

    One connection per company. The “Check PEC and receive” icon in the company row checks the mailbox manually and shows how many receipts and incoming invoices were processed; if receiving is off, incoming invoices are not counted.

    Regime, rates and VAT-free lines

    Elbuz takes a line's rate from, in order: the document line, the product, the product's tax class, the document's tax class. The “Default rate, %” field applies only when no class is set anywhere. A “no tax” document class gives rate 0, not the field value. Shipping takes the largest line's rate; it can't be set separately.

    A zero-rate line needs a reason why it has no VAT: the natura code. For buyers in Italy it comes from the “Natura for 0% lines” field in the connection, not selected by default.

    NaturaWhen to choose it
    N4VAT-exempt transaction (art. 10)
    N3.1export
    N3.2intra-EU supply
    N6.9reverse charge
    N2.1, N2.2not subject to VAT

    Exports and intra-EU supplies: natura per line

    For a buyer outside Italy, the connection value doesn't apply. Until the invoice is sent, the “FatturaPA” section of a posted document has a “Natura per line” block (not in RF19 mode): each line shows what's on the invoice now, and you can pick a code, e.g. N3.1 for exports or N3.2 for intra-EU supplies. If something needs checking, the block opens itself. Choices save at once: the “On the invoice now” column updates, and the XML button shows them.

    Before sending and after an SdI rejection, the XML button shows the current invoice, or its errors if there are any. For a sent or accepted invoice, it returns the file exactly as it went out.

    • A line without VAT and without natura — the invoice won't go, and Elbuz lists these lines.
    • The buyer is outside Italy, but lines use the product rate — Elbuz asks you to confirm, since exports and intra-EU supplies are usually VAT-free.
    • A tax class with no rate (a percentage in its name, but the rate is 0) — the invoice won't go: fill in the rate in the directory or choose natura for the line.

    From the reverse charge group, the natura list has only N6.9; codes N6.1–N6.8 are not there.

    The “Legal reference (RiferimentoNormativo)” field applies only to lines with the natura chosen in the connection; with no natura chosen, it does nothing. You can leave it empty: Elbuz fills in the standard text for the chosen natura, e.g. “Esente art. 10 DPR 633/72”.

    In RF19 (forfettario) mode, all lines go without VAT with code N2.2, and document rates are ignored.

    The “€2 stamp duty (bollo virtuale)…” checkbox is on by default. It adds the stamp duty mark when lines with natura N2.1, N2.2, N3.5, N3.6 or N4 total over €77.47. Exports, intra-EU supplies and reverse charge don't count. It's only a mark: the €2 isn't added to the total, and your company pays the duty itself.

    How to send an invoice to SdI

    FatturaPA is issued from a sales invoice or an invoice of your connected company. Post the document first.

    1. Open the posted document and go to the “FatturaPA” section.
    2. Check the “Buyer’s codice destinatario / PEC” field.
    3. Click “Send to SdI” and confirm.
    The FatturaPA section in the card of a posted sales invoice
    1Sending status
    2How the invoice reaches SdI
    1. Sending status — shows that the FatturaPA invoice has not been sent yet.
    2. Hint — the invoice goes to SdI by e-mail from your PEC; SdI checks it and delivers it to the buyer.

    What to enter in the recipient field:

    BuyerWhat to enterWhere the invoice goes
    Business in Italythe 7 characters from the buyer, or their PEC; without them Elbuz asks you to confirm 0000000, and you have to tell the buyer yourselfto the buyer through SdI
    Consumer in Italynothing: 0000000 is sentto the buyer's area on the Agenzia delle Entrate website
    Buyer abroadnothing: XXXXXXX is sent if the card has a country (an empty one counts as Italy)only to SdI; pass the invoice to the buyer yourself

    A buyer in Italy needs a Partita IVA or codice fiscale (16 characters) in the order or in the “VAT ID” or “Tax ID (IPN)” fields of the contact card. A city is required for buyers from any country. For later invoices to this contact, Elbuz fills in the previous recipient itself.

    The “Send automatically when posted” checkbox in the connection sends a sales invoice or invoice right after posting. A nota di credito goes only by button. If the invoice is missing something, it won't go, and the reason appears in the “FatturaPA” section.

    Auto-send has no one to ask: if a business buyer's code or PEC, natura or other data is missing, or the buyer is outside Italy and lines use the product rate, sending stops. The “FatturaPA” section shows the “Not sent” status with an explanation, and so does the document history. Fix the data and send with the “Send again” button.

    One sale, one invoice

    An invoice and a sales invoice linked directly or via a shared order are one sale. The sales invoice is the main one: an invoice for a sale with a posted sales invoice is a second document, even if the sales invoice isn't sent yet. Several sales invoices for one order are separate deliveries; each goes on its own if the order has no sent invoice yet.

    When you send with the button, Elbuz warns you, and you can click “Send anyway”. Auto-send skips the second document and records this in the history.

    Names, addresses and product names in Cyrillic are transliterated: FatturaPA accepts only Latin characters.

    What the SdI response means

    Elbuz checks PEC every 10 minutes, and the “Refresh status” button in the “FatturaPA” section fetches receipts at once. The status, file and SdI identifier are shown in this section, and events in the document history.

    Status in the sectionWhat happenedWhat to do
    Queued, Sendingthe invoice is waiting to be sentwait
    Sent to SdI, awaiting receiptthe e-mail left your PECwait
    Accepted by SdIthe invoice was delivered to the buyernothing
    Accepted by SdI and a yellow messagethe invoice is issued but not delivered to the buyer; it is in the buyer's area on the Agenzia delle Entrate websitetell the buyer
    Not sent and a yellow messageauto-send stopped, nothing went to SdIfix the data and send again
    Rejected by SdISdI did not accept the file; the reason is in the sectionfix it and send again
    Sending errorPEC did not accept the e-mailcheck the mailbox and send again

    How to correct a sent invoice

    An invoice that is awaiting a receipt or accepted by SdI cannot be unposted. You correct it with a nota di credito:

    1. In the card of the sent invoice, choose “More” → “Create a new document based on this” → “Return from customer”. Only then does the nota di credito refer to the original invoice: a return without this link goes without a reference and without an error.
    2. Post the return.
    3. Send it with the button in the “FatturaPA” section.
    4. Issue a new invoice if needed. After a full-amount nota di credito, a document of the other type (invoice instead of sales invoice or vice versa) goes without the same-sale warning. After a partial one, the warning stays. A new sales invoice for the same order is a separate delivery anyway. Check stock: a return from customer may not restock the goods, and the new sales invoice writes them off again.

    A rejected invoice does not count as issued: you can unpost the document, fix it and send it again. The invoice date comes from the posting date, so posting again changes it. If the date matters and the document doesn't need changes, send again without unposting.

    How to receive incoming invoices

    Turn on “Receive incoming invoices from PEC” in the connection. Supplier invoices that SdI sends to your PEC become purchase invoices every 10 minutes, and a nota di credito becomes a return to supplier. Elbuz creates new suppliers and products itself. The XML stays in the document's “FatturaPA” section, and the same file is never imported twice.

    On the first mailbox read, Elbuz takes messages from the last 14 days and reads only the “Inbox” folder.

    Invoices arrive only if your PEC is registered at SdI as the receiving address. If a different codice destinatario is registered there, they go to it.

    If one file contains several invoices, Elbuz takes the first one and doesn't warn about the rest: enter them manually.

    An SdI message that failed checks isn't lost: in the “E-invoices (EU)” window, the company row has a “SdI messages that failed checks” log with reasons and counts, keeping the last 30 entries. For about 2 days Elbuz re-reads such a message and removes the entry once it succeeds. If it stays, check the invoice in Fatture e Corrispettivi.

    If receiving incoming invoices is off, SdI receipts are still read, but supplier invoices are not created. These messages stay in the mailbox: when you turn receiving on, Elbuz picks them up for the last 14 days; enter older ones manually.

    Scenarios

    An Italian company's first invoice

    Situation. The business buyer gave you a 7-character code, and you already have PEC.

    What to do. Connect the company, post the sales invoice, enter the code in the “FatturaPA” section and click “Send to SdI”.

    What you get. After the receipt, the status changes to “Accepted by SdI”, and the SdI identifier appears in the section.

    What won't happen. Elbuz won't send the buyer a PDF or an e-mail: SdI delivers the invoice.

    The buyer is a consumer without a code

    Situation. The buyer gave only a codice fiscale.

    What to do. Enter it in the contact card and leave the recipient field empty.

    What you get. The invoice goes with code 0000000 and waits in the buyer's area on the Agenzia delle Entrate website.

    What to do when an invoice won't send

    What you seeWhyWhat to do
    “Could not log in to PEC” Wrong password, login or server Check the details in the connection and with your PEC provider
    “The invoice number for SdI: up to 20 Latin characters…” The number has Cyrillic, no digit, or is too long Change the document number
    “Fill in address, CAP (5 digits) and comune in your company card” Your company's details are incomplete Fill in the company details
    “An Italian buyer needs a Partita IVA or codice fiscale (in the order or contact card)” No number, a malformed codice fiscale, or an empty country in the card Enter the number and country in the card or the order
    “For bank transfer add an IBAN…” The company has no valid IBAN in its bank accounts Add the account in the company details
    “Codice destinatario: 7 letters and digits, or a PEC address” The value looks like neither a code nor an address Check it with the buyer
    “Lines without VAT and without natura: …” The line has neither a rate nor a code Choose a code in the “Natura per line” block; for buyers in Italy, you can also set it in the connection
    “This sale already has an invoice in SdI: document …” or “A delivery note … is posted for this sale” A second document for the same sale Don't send it (one sale, one invoice)
    “The document’s company is not connected to FatturaPA…” or the card has no “FatturaPA” section The document is issued by another company, or its connection is off Connect this company or change it in the document
    The status stays “awaiting receipt” for a long time No PEC sign-in (the error shows in the company row), the receipt is in the “SdI messages that failed checks” log (“E-invoices (EU)” window), or the reply hasn't arrived yet Click “Check PEC and receive”, and compare the invoice in the Fatture e Corrispettivi portal
    In the history: “SdI receipt … signature not verified” The receipt's signature check failed, so the status didn't change Check the invoice in the Fatture e Corrispettivi portal

    FAQ

    Do I need an intermediary or SdI accreditation?

    No. The invoice goes as an e-mail from your company's PEC mailbox. All you need is the mailbox itself (connection).

    What do I enter if the buyer is a consumer?

    Leave the recipient field empty and enter the buyer's codice fiscale. The invoice will be in their area on the Agenzia delle Entrate website.

    Can I invoice a public body?

    No, Elbuz doesn't build the FPA12 format with a digital signature. Issue such an invoice in another service.

    How do I invoice under the forfettario regime?

    Choose the RF19 regime: all lines go without VAT with code N2.2. Keep the €2 stamp duty on: the mark appears on invoices over €77.47.

    How do I cancel a sent invoice?

    An accepted invoice can't be canceled: create a return from customer based on it, post it and send it as a nota di credito (correction).

    Where it is and who has access

    Menu
    Directories → Documents → E-invoices (EU)
    Other entry points
    the card of a sales invoice, invoice or return from customer, “FatturaPA” section
    Access rights
    connection — the “E-invoices (EU)” window in “Group permissions”, by default only the administrators group; sending from the card — access to the documents window
    Prepare
    your company's PEC mailbox and its password; your company in contacts with “My company” checked, an address, postal code (CAP) and city; an IBAN in the bank accounts

    Related topics

    Was this article helpful?

    Missing a feature? Tell us.

    We will add it for free if other users need it too.

    If only you need it, we will agree on it separately.

    Article contents

    Suggest an improvement

    Try Elbuz free