↑↓ selectEnter openEsc close

    1. Elbuz

    Bin locations in a warehouse: tracking stock by bin

    3 min readUpdated

    Bin locations show which bin holds each product: receivers put deliveries away by address, and pickers follow the prompts. Stock is calculated as before, so you can turn this on in a running warehouse without stopping it.

    When you need this:

    • One product sits in several places — Elbuz shows the quantity in each bin and suggests which to take from first.
    • A new employee doesn't know the warehouse — the picking list leads by address, in walking order.
    • Stock counts halt the warehouse — count one bin at a time while the rest keeps working.

    Where to start: four steps to get started.

    What bin locations can do

    • Setup — bins by range, barcode labels, a rule for receipts, connecting a scanner, reports. For the administrator.
    • Putaway and counting — receiving into bins, batches and expiry dates, transfers, bin counts, the log. For the storekeeper.
    • Picking and packing — suggestions by location type, expiry and date, the picking list, waves and tasks, carts, replenishment, packing, picking with a scanner. For pickers and packers.
    • Reconciling with the warehouse — “Not placed” and “Mismatch” show how bins differ from stock.

    How to start using bin locations in a warehouse

    Bin locations are turned on separately for each warehouse and are off by default. While the switch is off, the warehouse works as before: posting documents does not change bins. Choose the warehouse in the “Warehouse” field at the top of the window, and all tabs show only that warehouse.

    1. Create bins: the “Create bins” button on the “Locations” tab.
    2. Print labels and stick them on the racks.
    3. Turn on the “Bin locations” switch and confirm.
    4. Place the goods you have: the “Stock by bin” tab → product row → “Move”.
    The “Bin locations” window for a warehouse where they are still off: a banner and four setup steps
    1“Warehouse” field
    2“Bin locations” switch
    3Setup steps
    1. The “Warehouse” field switches the window to another warehouse: each warehouse has its own bins.
    2. The switch turns on bin locations for the selected warehouse; stock does not change.
    3. The steps are shown while the warehouse has no locations.

    Turning bins on recalculates nothing. Warehouse stock stays the same, and all goods count as not placed until you assign them a bin. The warehouse keeps working: selling a product that has no bin simply reduces “Not placed”.

    Five warehouse counters sit above the tabs:

    CounterWhat it counts
    Locationsall zones, racks, shelves and bins of the warehouse
    Occupiedlocations that hold goods right now
    Placed, unitsthe total quantity across all bins
    Not placed, unitsthe sum of positive differences per product: warehouse stock minus the quantity in bins
    Mismatchesproducts with more in bins than in the warehouse

    What “Not placed” and “Mismatch” mean

    They show the difference between two numbers: warehouse stock and the total in bins. These values are not stored anywhere; they are calculated every time, so they always match current stock.

    Warehouse stock is changed not only by documents but also by imports, price lists and the API. These know nothing about bins and change only warehouse stock, so after them the difference updates on its own.

    What you see on the “Stock by bin” tabWhat it meansWhat to do
    A row with an addressthis is how much of the product is in that binnothing
    “Not placed” with a positive quantitythe warehouse has more of the product than the bins: it hasn't been put away yet or was added by an importplace it
    “Mismatch” with a negative quantitythe bins hold more of the product than the warehouse: stock was reduced by an import, the API or a write-off beyond what was availablecount the product and post a bin count or a warehouse stock count
    The “Stock by bin” tab: “Mismatch” and “Not placed” rows and products by address
    1“Mismatch” row
    2“Not placed” row
    3Bin address
    4“Move” button
    1. “Mismatch”: the bins hold more of the product than the warehouse, so the quantity is negative.
    2. “Not placed”: the product is in the warehouse but not in a bin yet.
    3. A row with an address: this much of the product is in that bin.
    4. “Move” places or transfers the product from the selected row.

    A warehouse stock count clears a mismatch like this: warehouse stock becomes equal to the counted quantity, and anything in bins above it is removed in picking order. If you know which bin has the error, it's simpler to recount just that one.

    The “Mismatches” counter only counts products that are still in bins; a write-off beyond what was available produces a “Mismatch” row but doesn't increase the counter. Rows without an address are visible only when the “Scan or address” field is empty.

    What happens if you unpost a document or turn bins off

    Unposting reverses exactly the movements the document wrote to the log, in reverse order. A bin never goes negative: if goods were already taken from it, Elbuz returns what it can remove, and the difference shows in “Not placed” or, if stock fell below the bins, as “Mismatch”. Unposting works even if bin locations were turned off for the warehouse. If the document took goods from a bin that has since been deleted, they return to “Not placed”.

    Turning bins off deletes nothing. Bins and their quantities are kept, but new documents no longer change them. Turn them back on, and everything that happened in the meantime shows as “Not placed” or a mismatch that you'll need to even out: place or recount. While a warehouse is off, the “Move” window, the scanner and bin counts refuse: “Bin locations are off for this warehouse, so bins would not change. Turn them on to transfer or count goods.” No document is created.

    Scenarios

    The warehouse is already running and can't be stopped

    What to do. Create bins, print labels, turn on the warehouse. Put goods away in batches: select a “Not placed” row, scan the bin, click “Move”. Post new receipts with bins right away.

    The result. Sales continue unchanged: a product without a bin is written off from “Not placed”, and this counter goes down every day until the whole warehouse is put away.

    What to do when something goes wrong

    Common problems
    What you seeWhyWhat to do
    There is no “Bins” button in the document card Bin locations are off for the document's warehouse, no warehouse is selected in the document, or the document type neither moves nor reserves goods Select a warehouse: the button appears right away. If bin locations were turned on while the card was open, close it and open it again
    The “Mismatches” counter is above zero Warehouse stock was reduced by an import, the API or in the product card: the bins hold more than the warehouse Count the product and post a bin count or a warehouse stock count

    FAQ

    Will the stock on my website change when I turn bins on?

    No. Warehouse stock is calculated as before and goes to the website by the same rules. Bins show where already counted goods are stored. The exception is “Blocked” locations: their quantity is subtracted from product stock in exports. If all free stock of a product is blocked, its status becomes “Out of stock” and returns once the block is lifted: this is reflected in available in YML and Google feeds and in the Elbuz storefront.

    I sold a product that isn't in any bin. What happens?

    The document is posted: the quantity reduces “Not placed”. If that isn't enough either, warehouse stock goes below zero, just as without bins, and a “Mismatch” row appears in the window.

    Can I run different warehouses differently?

    Yes, each warehouse has its own switch. In a transfer between such warehouses, bins are taken into account only where they are turned on.

    Do I need to stop the warehouse to turn bins on?

    No. Turning bins on recalculates nothing: goods become “Not placed”, sales continue, and you can put them away in batches.

    Who does what in bin locations?

    The administrator creates bins and rules, the storekeeper places and recounts goods, the picker picks them by address, and the packer packs orders into boxes. Each role has its own article in this section.

    Where to find it and who has access

    Menu
    Directories → Base product catalog → Bin locations
    Other entry points
    a button in the toolbar of the “Warehouses” window; the “Bins” button in the document card
    Access right
    the “Bin locations”, “Document bins” and “Scanner screen” windows in group permissions
    Prepare
    an active warehouse; virtual supplier warehouses are not shown in the window

    Related topics

    Was this article helpful?

    Missing a feature? Tell us.

    We will add it for free if other users need it too.

    If only you need it, we will agree on it separately.

    Article contents

    Suggest an improvement

    Try Elbuz free