↑↓ selectEnter openEsc close

    1. Elbuz
    2. In-app lessons

    How to take a lesson in the AI consultant chat

    4 min readUpdated

    A lesson guides you in 5–7 steps: it explains what to do, opens the window and highlights the button. An action step counts once the program sees the action in your account.

    What it gives you:

    • No hunting for buttons — “Show me where” opens the window and points to the button.
    • No file to practice on — “Practice file” gives a ready price list or product table.
    • Distracted mid-lesson — progress is saved; “Continue” returns to the same step.
    • Not sure how — “Read” in the “⋯” menu opens this step’s guide article.

    Where to start: robot button → “Lessons” tab → “Start lesson” next to a lesson.

    What a lesson does

    Where to find a lesson and how to start it

    Open the AI consultant chat with the robot button and go to the “Lessons” tab. Once you have points, a rank badge and the point count appear next to the tab name.

    The “My lessons” list starts with “For you”: lessons your manager assigned and lessons for your department. The first three are shown; “More N” opens the rest.

    Below are folders by guide section; a completed folder is collapsed and marked with a check mark. Click “Start lesson” or the lesson row itself.

    The program also offers a lesson by itself as a row in the chat feed: “Your first day in Elbuz · 10 min” and a “Start lesson” button. While a lesson is in progress, the row shows the step instead of the minutes, for example “2/7”.

    An assigned lesson is offered first, then a lesson for your department, then the first unfinished one. The cross in the row means “Not now”: offers disappear until your manager assigns you a lesson.

    While the “Recommended path” runs after sign-up, no lesson is offered: only one voice talks at a time.

    What a lesson step contains

    Above the steps are “Lesson · step 2 of 7” and progress dots. A completed step is marked with a “Done” check mark, a skipped one with “Skipped”. The current step is expanded.

    Lesson card «Stock and stop rules», step 2 of 7, with the step menu open
    1Finished step
    2Yellow warning
    3Show me where
    4Done — check
    5Step menu
    1. The first step is marked Done.
    2. The yellow box warns what the step changes in your data.
    3. «Show me where» opens the right window and highlights the control.
    4. «Done — check» verifies the step and moves on.
    5. The «⋯» menu offers to read the step aloud or skip it.

    Under the step text is a row of buttons: “Show me where”, “Practice file” where there is one, and the main button. Less frequent actions are tucked into the “⋯” menu on the right of the step header.

    ButtonWhereWhat it does
    “Show me where”button rowopens the step’s window next to the chat and highlights the button (more)
    “Practice file”button rowdownloads a training file for the exercise
    “Done — check”button rowasks the program to check the action; present in action steps
    “Next”button rowcloses an explanation step where there is nothing to do
    “Copy the phrase”“⋯” menucopies a ready-made phrase: a question to the consultant or a task for an AI employee
    “Read”“⋯” menuopens the guide article for this step in “Help”
    “Skip”“⋯” menucloses the step without the action; it earns no points

    A yellow banner above the buttons means the step changes live data. It says exactly what: for example, “The rule changes this supplier’s product stock from the next import”. Text generation and content search warn in the same place that they spend money from your balance.

    How the program checks a step

    An action step counts when the program finds your action in the account after the lesson started. A colleague’s action or your own earlier one doesn’t count: the lesson teaches you to do it, not to remember it. The exception is your own AI assistant in the “AI employees in 15 minutes” lesson: one created earlier counts too.

    Click “Done — check”. If there is no action yet, a gray banner with a clock appears: what exactly the program doesn’t see and what to do. For example: “I don’t see a stock rule with values from you yet”.

    You don’t have to click the button. While the chat is open, the lesson card checks again every 15 seconds and counts what you have done. A green line with a summary then appears, and the lesson moves on to the next step.

    Points for a step are also awarded by the server after the check, so they can’t be gamed. More: Points, ranks, medals and cups.

    “Show me where”: how a lesson finds the button

    “Show me where” opens the step’s window next to the chat. The program clicks the intermediate controls itself — a tab, a section of a card, your price list source in the list. The last one, the button you need, gets a frame with a hint and an arrow.

    The arrow fades in a few seconds. The frame with the hint stays for 20 seconds or until your first click. If you lose the button, click “Show me where” again.

    Products window with the «Add» button highlighted next to the lesson card
    1Highlighted «Add» button
    2Show me where
    1. The Products window opens and «Add» is outlined with a hint.
    2. «Show me where» in the lesson card triggers the highlight.

    In steps about your own record, “Show me where” opens exactly that record: the product created in the previous step, your order, your price list source. While the record doesn’t exist yet, only the window opens.

    If the button isn’t on the screen within 10 seconds, the message “Could not find this button on the screen. Open the window yourself — the step is described above.” appears. There is no “Show me where” button at all if you have no access to the step’s window.

    The “Practice file” button appears in steps where you need to upload a file and may not have one of your own at hand. Upload it in the window just like a real one: the lesson counts the step.

    FileLessons
    supplier price list, Excel“Supplier price list in 20 minutes”, “Stock and stop rules”, “Matching supplier products”
    product table, Excel“Your product file into the catalog”

    Data from the practice file goes into your account. When the lesson is over, delete the training source if you don’t need it.

    If the account has no data yet

    Twelve lessons need data: products, orders, customers. These include, for example, “Product list and bulk changes” and “Customer order”. If the account has no products and no sample data, such a lesson offers to add sample data.

    Lesson card “Product list and bulk changes”, step 1 of 7, with a notice that the lesson needs sample data and an “Add sample data” button
    1Sample data notice
    2Add sample data button
    1. The notice says the lesson needs data — products, orders, customers — and offers to add sample data.
    2. “Add sample data” fills the empty account with sample records so the lesson can be completed.

    Sample data is an example electronics store: 60 products, suppliers with price lists, customers and orders. The records are marked “Sample” and are not exported to your website or marketplaces. An administrator sees an “Add sample data” button in the step; other employees see a request to contact the administrator.

    To remove the example: “System settings” → “Other settings” → “Sample data” → “Remove sample data”. Details: Sample data.

    Skip, go back, stop

    • “Skip” in the “⋯” menu closes the step without the action. It earns 0 points, and the lesson no longer counts as “no skips”.
    • “Go back” next to a skipped step opens it again while the lesson isn’t finished. Do the action, and the step counts with points.
    • Clicking a completed step opens it for viewing. The lesson stays on it until you click the step’s button.
    • “Stop the lesson” pauses the lesson; progress is kept. “Continue” in the list returns you to the same step.
    • “Take again” on a completed lesson starts it from the first step. Points you earned stay and are not awarded again for the same steps.

    After the last step, “Lesson complete!” appears with what now works for you. “Hide” removes the card.

    Scenarios

    Your first supplier price list. The “Supplier price list in 20 minutes” lesson, the “Connect a price list” step: “Practice file” → source wizard → import. The lesson counts the step as soon as the import finishes.

    An order pulled you away. “Stop the lesson”, process the order, come back: “Continue” in “My lessons” opens the same step.

    The step was done before the lesson. You created a product yesterday, and the lesson asks you to create one. Create another test product or click “Skip”: an earlier action doesn’t count.

    What to do when a step doesn’t count

    What you seeWhyWhat to do
    A gray “I don’t see … yet” bannerthere is no action, or it was done before the lesson started or by another employeedo the action yourself now, as the banner says
    “Could not find this button on the screen…”the window is still loading or the button is in another sectionclick “Show me where” again or open the window yourself
    No “Show me where” buttonyou have no access to the step’s windowask your manager to open the window or skip the step
    The step isn’t checked by itselfthe chat is closed: re-checking runs only while it is openopen the chat and click “Done — check”

    Go to the “Chat” tab and ask in your own words. The consultant knows which lesson and step you are on and answers about exactly that. It can’t count a step: only the action check does that.

    While a lesson is in progress, the consultant doesn’t distract you with other hints.

    FAQ

    Can I run several lessons at once?

    Only one lesson is active. If you start another, the previous one is saved with all its steps, and “Continue” returns you to it.

    A colleague did the step for me — why didn’t it count?

    A lesson counts only your own actions. Do the step under your own sign-in.

    How long does a lesson take?

    From 8 to 20 minutes; the time is shown next to the name. You can pause a lesson as often as you like.

    Is there a test account for lessons?

    No, lessons run in your working account. Make test records as the lesson asks, and delete training data after you finish.

    The lesson is in English, but I need Ukrainian — what do I do?

    Change the interface language in your profile. The lesson switches together with the interface.

    Where to find it and who has access

    Desktop
    round robot button in the bottom right → the “Lessons” tab
    Chat feed
    a lesson row with a “Start lesson” or “Continue” button
    Access rights
    a lesson is visible if you have access to its window

    Related topics

    Was this article helpful?

    Missing a feature? Tell us.

    We will add it for free if other users need it too.

    If only you need it, we will agree on it separately.

    Article contents

    Suggest an improvement

    Try Elbuz free