↑↓ selectEnter openEsc close

    1. Elbuz
    2. AI employees

    AI employee permissions and security: what an agent sees and what it can change

    14 min readUpdated

    An Elbuz AI employee works like a new hire on probation. It sees only what is open to the person who assigned its task or duty, and no more than its role allows. Any change it wants is a proposal; you decide in “Pulse”.

    When you need this:

    • Deciding whether to let AI into store data — see what it will see and what it can't do.
    • A manager asks the agent for profit — and is refused: accounting isn't open to them.
    • AI should do routine work on its own — “Management” turns on “Act on its own”, not for everything.

    Where to start: “Pulse” → “Trust”.

    What an agent can and can't do

    Whose permissions an agent uses

    An agent has no separate “all-seeing” access: it works with a specific person's permissions and within its role.

    How it was startedWhose permissionsLimit
    A task: the “Assign” button or the AI consultant chatthe person who assigned it: their windows, fields and “Data scope”the role set: sections of the role's departments and sections the role needs, minus those removed in “Customize”
    A personal assistant's dutyits owner'sthe assistant's role set
    A shared agent's duty or flowthe author's: whoever set the duty or wrote the flow diagram (or last changed it)the agent's role set; if there is no author (ready-made CRM flows) or the author is disabled — only sections of the agent's departments
    What an agent will see: at the top, what the role set is made of, then one question — is the section open to the person who assigned the task (or to the duty's author)? The agent sees only what passes both steps
    minusyesnoSections of the role's departmentRole setSections the role needsRemoved in “Customize”Is it open to the person whoassigned the task, or to the duty'sauthor?The agent sees itThe agent doesn't see itExample: a manager withoutaccounting access assigns a task tothe “Accountant”. Accounting is inthe role set but closed to themanager — the agent doesn't see it
    • Action or result
    • Decision: the path depends on the answer
    • Key step

    Example: a manager without access to “Accounting for your accountant” asks the “Accountant” agent to summarize debts — the agent won't see the accounting and will say so. Given a task by the owner, the same agent does see it. People's own rights don't change.

    What an AI agent will see: pick a role and who assigned the task

    Agent role: Accountant · Assigned by: Sales manager — the agent sees 2 of 7

    Section or dataWhat the agent sees
    Accounting for your accountantnot visible closed to the person
    Supplier price listsnot visible the role doesn't need it; closed to the person
    Purchase pricenot visible closed to the person
    Ordersown only the person has “Own only”
    Customersown only the person has “Own only”
    Warehousenot visible the role doesn't need it; closed to the person
    Customer ticketsnot visible the role doesn't need it

    The agent sees a section only when its role needs it and it is open to the person who assigned the task. The agent never gets more than that person has.

    This is an example with typical department permissions. In your store, your own department and personal permissions apply.

    Personal assistant

    Any employee can create an assistant for themselves. Only the owner can assign it tasks and edit it; “Management” can see it, other employees can't. How to create one — How to create your own AI employee.

    What an agent doesn't see

    • Hidden fields. If the purchase price is hidden from the person, the agent sees neither the price nor conclusions drawn from it: “cheaper at another supplier”, “selling at a loss”.
    • Other people's data. Customers and documents — only those open to the person in “Data scope”.
    • Sales revenue and margin — without access to “Sales analytics” or “Accounting for your accountant”. Catalog margin — without an open purchase price. The agent sees the totals of individual documents just as the person does.
    • Other people's sections in a report. Each recipient sees only their own sections — in the window, in email and in Telegram. More — AI employee reports.

    What an agent can change

    Nothing without permission: everything becomes a proposal in “Pulse” — what, what for and why. These go through proposals:

    • edits to records — products, customers, documents;
    • tasks, follow-ups, deals;
    • emails and replies to customers;
    • starting an import or export;
    • a new way of working the agent wants to remember.
    The “New AI employee” form with the “AI · Pricing” role: “Customize” is expanded with the “Tools” and “Sections” switches
    1Customize
    2Changes — as a request
    3Role sections
    4Company role
    1. You can switch off what is not needed, but you cannot add anything beyond the selected roles.
    2. The agent can create or change a record only as a request in Pulse.
    3. The sections the role needs; the agent sees them only if they are also open to the person.
    4. Only Management can save the set as a role for everyone.
    The agent only proposes changes to markups and promotions; a person accepts them — each one separately. “Act on its own” and “Apply all” don't apply to them: such changes alter prices in bulk.

    “Don't change anything yourself” in a task doesn't prohibit proposals: a proposal changes nothing without you. If you don't want proposals either, write “report only” or “no proposals”.

    The path of any change from an agent: first a proposal, then a person or a trust rule decides
    yesnonoyesThe agent wants to changesomethingA proposal in “Pulse”: what, what for,whyIs it a markup or a promotion?A person only, each one separatelyHas “Management” trusted thisaction: “Act on its own”?Waits for your “Accept” or “Reject”An email to a customer is firstchecked by AI · Controller; otheractions have an hourly limitDone, visible in “Done by AI”; can beundone until the record is changed;an email can't
    • Action or result
    • Decision: the path depends on the answer
    • Key step

    “Trust” and “Act on its own”

    “Management” can hand AI the routine you accept without edits: “Act on its own” on the “Trust” tab, per action type for the company. Record edits are trusted separately, to one agent. The Controller first checks emails AI sends on its own. Setup, safeguards and undo — Trusting the AI: “Act on its own”.

    Who “Management” is

    “Management” means employees with the “AI Pulse: trust” right. Usually these are administrators only. Only “Management” can:

    • turn on “Act on its own” on the “Trust” tab and “Accept and do it yourself from now on” on proposals;
    • create agents shared by the company;
    • raise “Steps per run” to 40, set an agent's daily budget, model and “Data scope”;
    • edit “AI rules”, accept rules and recipes for the whole company, and save company roles;
    • turn on and change ready-made flows on the “Automations” tab;
    • see all reports and other employees' personal assistants.

    “AI rules” are your store's standing rules for agents: “margin no lower than 15%”, “address customers formally, no emojis”. Where: Directories → Flows → “More” → “AI rules”.

    “Applies to”: all agents, a role or one agent. An agent can propose a rule itself — it takes effect after confirmation. If the role or agent is deleted, its rule stops applying.

    Role and “Customize”

    A role is the upper limit of what an agent can do: tools, sections, proposal types. “Accountant” and “Analyst” only read; “Warehouse”, “Integrator” and “Legal” can also propose tasks. You can pick several roles — their capabilities add up.

    “Customize” in the agent form opens “Tools” and “Sections”: you can remove what you don't need, but not add beyond the roles — the server checks this. More about roles — AI employee roles.

    Limits and stopping

    LimitHow muchWho changes it
    Steps per run16 in a task and wherever the agent writes a report; 8 in any other flow block; before the limit, the agent sums up what it has collected“Management”, up to 40
    Proposals of follow-ups, deals, tasks10 per run, the agent lists the rest in the report; a long task is split into parts, each with its own limitcan't be changed
    Agent's daily budgetonce used up, the agent stops until tomorrow“Management”
    Tasks per dayper employee, in the shared agent's form“Management”

    If an agent runs too long or goes the wrong way, click “Stop” in “Progress”. What was spent before stopping isn't refunded.

    Scenarios

    The agent proposes raising a markup

    “Pricing” found categories with a margin below target and proposes a new markup. The proposal waits for a person — “Act on its own” can't be turned on for it.

    Follow-ups without confirmation

    For a month the owner accepts all follow-ups from AI, then turns on “Act on its own” for “Plan a follow-up”. Now AI schedules follow-ups on its own.

    A manager's personal assistant

    A manager creates an assistant to find customers who haven't bought in a long time. Colleagues don't see it; “Management” sees it but can't assign it tasks.

    What to do when…

    What you seeWhyWhat to do
    The agent says it has no access to a sectionthe section is closed to you or isn't part of the roleassign the task to someone who has access, or change the agent's role
    The “Act on its own” switch can't be clicked or isn't thereyou aren't “Management”, or it's a markup or promotiontrust troubleshooting
    The agent stopped in the middle of a taskit ran out of steps or daily budgetsplit the task into parts or ask “Management” to raise the limit
    A colleague can't see your assistantby design: personal assistanta department needs a shared agent

    FAQ

    Can an agent see more than I can?

    No: with your task or your duty, the agent sees only what is open to you, and only within its role.

    Can AI change prices on its own?

    Markups and promotions — no: a person accepts each one. A single product's price changes through a proposal; without confirmation only if “Management” trusted this agent with record edits, and then at most one change per hour, after which it asks again.

    Can I undo what AI did on its own?

    Yes, on the “Done by AI” tab, as long as nobody has changed the record after AI. An email sent to a customer can't be undone, so Elbuz warns you about this before you trust AI with emails.

    Who can allow AI to act without confirmation?

    Only “Management” — on the “Trust” tab for an action type, or with the “Accept and do it yourself from now on” button for one agent's edits (Trusting the AI).

    Where can I see what an agent did?

    Proposals — in “Pulse” on the “Proposals” tab, what AI did on its own — on the “Done by AI” tab, the steps of the current task — in “Progress”.

    Where it is configured

    People's rights
    employees' departments and their rights to windows and fields — same as before
    Agent limits
    the agent's role and the “Customize” button in the agent form (“Pulse” → “Agents”)
    Independence
    “Pulse” → “Trust” → “Act on its own”; for record edits — the “Accept and do it yourself from now on” button on the agent's proposal
    Access right
    “Trust”, limits and shared roles — “Management” only (the “AI Pulse: trust” right)

    Related topics

    Was this article helpful?

    Missing a feature? Tell us.

    We will add it for free if other users need it too.

    If only you need it, we will agree on it separately.

    Article contents

    Suggest an improvement

    Try Elbuz free