Elbuz gives a Telnyx number to a voice AI employee: it answers customers when managers are busy and calls them itself from flows. Telnyx sells numbers in many countries.
When you need this:
- Calls after hours — the AI gives the order status and explains delivery and payment.
- A customer wants to order or complain — the AI records it; a callback request goes to “Pulse”.
- A new order arrives — the AI calls to confirm it.
- An order has shipped — the AI calls and reads out the waybill.
Where to start: enter the Telnyx number in the “Voice on the phone” section of the AI employee card.
What the AI can do on a Telnyx number
In the Telnyx portal, you create an FQDN-type connection pointing to the domain from the SIP address in the “Voice on the phone” section, and in Elbuz you select the “Telnyx” operator. What exactly the AI says and how to set up calls from flows is covered in AI employee on the phone.
- Answers calls. Tells callers their order status based on the caller's number, explains delivery and payment using the store's articles, and gives product prices and availability (inbound).
- Takes requests. Records the name, number, and the issue; a callback request goes to “Pulse” for the customer's assigned manager.
- Leaves a transcript and summary. Elbuz creates a new customer in by number, and the summary goes to the feed of their card (what you get in Elbuz).
- Calls on its own. A Flows flow with the “AI call” block confirms an order or reports a shipment (outbound).
What you need from Telnyx
- A paid account. The LiveKit guide (LiveKit is the platform Elbuz voice runs on) requires a paid Telnyx account: trial accounts have call restrictions.
- A number. Buy a number in the Telnyx portal before setting up the connection — you'll need to assign it in the last step.
- An Outbound Voice Profile with allowed countries — for outbound calls (how to create one).
You set up the SIP connection, number assignment, and Outbound Voice Profile in the Telnyx portal yourself. The Telnyx number and minutes are paid to Telnyx at its rates, separately from Elbuz; a minute of AI conversation in Elbuz costs EUR 0.15, billed by actual seconds (voice AI pricing).
Telnyx portal menu names are taken from the LiveKit and Telnyx documentation as of 20.10.2026. If an item is named differently, go by these pages or ask Telnyx support:
How to connect inbound Telnyx calls
Order: Elbuz first (to see the address), then Telnyx, then a test call from your own mobile.
Step 1. In Elbuz
- Open the AI employee card (see where to find it and who has access) and scroll to “Voice on the phone”.
- In “Phone number”, enter the Telnyx number in international format with a plus, for example
+380441234567. - In “Operator”, select “Telnyx”. The app already knows the Telnyx server addresses for all regions, so the “Operator addresses” field isn't shown for Telnyx.
- Turn on “Answer calls”. The section saves itself after you change a field, and “Voice settings saved” appears at the top.
- A blue box appears below the fields with an address like
380441234567@<domain>and the hint “Twilio and Telnyx — SIP trunk”. In Telnyx, this is the SIP connection from step 2, and it needs only the part of the address after@— the domain. Copy it from there: don't make it up or shorten it.
1
Operator: Telnyx2
Telnyx setup steps with the LiveKit address3
SIP server4
Line login5
Number shown to the customer- Operator — Telnyx is selected, and the instructions below change to match it.
- The steps for the Telnyx account, including the FQDN address to enter there.
- SIP server for outgoing calls: sip.telnyx.com.
- Line login — the one set up in the Telnyx outbound calls authentication.
- The number the customer sees on outgoing calls.
Step 2. In the Telnyx portal
- Open Real-time Communications → Voice → SIP Trunking and click “Create SIP connection”. Give it a name, for example “Elbuz AI”.
- Select the FQDN type → “Next”.
- Click “+ Add FQDN”, enter the domain from the SIP address in the “Voice on the phone” section (the part after
@), port5060, and save. - In the “Outbound calls authentication” block, set a Username and Password. You need them for outbound calls — write them down; in Elbuz they become “Line login” and “Line password”. Then click “Next” twice (you can skip the Configuration section).
- On the inbound tab: Destination number format —
+E.164, Origination number format —+E.164, SIP transport protocol —TCP, SIP region — the one closest to your customers (for Ukraine, Europe). “Next”. - On the outbound tab, select the Outbound voice profile (how to create one — in outbound calls). “Next”.
- Click the link icon and assign your number to this connection → “Complete”.
The number format must be exactly +E.164. Elbuz accepts a call only when the dialed number matches the “Phone number” in the section (with or without the plus). A number in national format won't match, and the call won't be accepted. The caller's number in +E.164 lets the AI find the customer and name their order.
Step 3. Check
Call the Telnyx number from your mobile. The AI should answer, and the conversation should appear in the call log. When there has been at least one inbound AI call in the last 30 days, the “Calls are coming in” step above the section fields is green — you see this when you reopen the card.
How to turn on outbound AI calls via Telnyx
Outbound calls go through the same SIP connection: Elbuz signs in to Telnyx with the username and password from “Outbound calls authentication”, and Telnyx lets the call through according to the Outbound Voice Profile rules. Outbound calls work only when “Answer calls” is also on.
In the Telnyx portal
- If you don't have an Outbound Voice Profile yet, create one in Real-Time Communications → Voice → Settings.
- In the profile, under International Allowed Destinations, add the countries the AI will call (for example, Ukraine). Telnyx won't let through a call to a country that isn't on the list. Some countries are enabled only after Level 2 account verification.
- Select this profile in the outbound settings of the SIP connection (step 6 above). An FQDN connection is linked to a profile from the connection settings.
In Elbuz, the “Outgoing calls” block
- Leave “SIP server” empty — the app uses
sip.telnyx.com, as in the LiveKit guide; the placeholder in the empty field shows exactly that. For the Europe region, you can entersip.telnyx.eu— Telnyx publishes the list of regional addresses at sip.telnyx.com/voice.json. - “Line login” and “Line password” — the Username and Password from “Outbound calls authentication”. The password isn't shown in the form again; an empty password field means “keep unchanged”.
- “Number shown to the customer” — the Telnyx number assigned to the connection. If empty, “Phone number” is used.
- “Call during hours” — format
9-20(what happens outside these hours). - Enter your number in “Number for a test call” and click “Test call”. This is a real call; the result is in the call log. Outside “Call during hours”, the test call isn't placed, and you get “It is outside calling hours now”.
What you get in Elbuz
| Feature | With Telnyx | What you need |
|---|---|---|
| The AI answers calls to the Telnyx number | yes | an FQDN-type SIP connection pointing to the domain from the “Voice on the phone” section, with the number assigned |
| The AI calls customers itself (flows, “Test call”) | yes | in the same connection — a username and password for outbound calls, plus an Outbound Voice Profile |
| AI conversations in the call log and the customer feed | yes | nothing extra (what remains after a call) |
| Employee calls in the log, the customer card during a call, “Call” from the card | no | Elbuz has no Telnyx driver |
Telnyx specifics
What goes where from Telnyx
| In Telnyx | In Elbuz |
|---|---|
| The number assigned to the SIP connection | “Phone number” and, optionally, “Number shown to the customer” |
FQDN connection: <domain>, port 5060 | the part of the address in the blue box after @ |
| Outbound calls authentication: Username | “Line login” |
| Outbound calls authentication: Password | “Line password” |
| Regional SIP address (optional) | “SIP server”; if empty — sip.telnyx.com |
| Telnyx subnets | nothing — built in for the “Telnyx” operator |
The X-Telnyx-Username header
You don't need to add the X-Telnyx-Username header mentioned in the LiveKit guide: for the “Telnyx” operator, Elbuz adds it itself, with the “Line login” value. Without it, Telnyx would look up the connection by IP address and not ask for the password.
Scenarios
The AI takes calls when managers can't keep up
Complete the three inbound steps; you can skip the line login and password. The AI will answer the Telnyx number, and conversations with summaries will appear in the call log and the customer feed.
The AI confirms every new order
Create an Outbound Voice Profile with your customers' country, enter the line login and password, and make a “Test call”. Then build a Flows flow with the “AI call” block triggered by order creation (confirm an order).
Customers in Europe
In the connection, select SIP region Europe, and optionally enter sip.telnyx.eu in “SIP server”. Elbuz already knows the Telnyx addresses for all regions, so you don't need to enter them.
What to do when the AI doesn't answer or doesn't call
| What you see | Why | What to do |
|---|---|---|
| A call to the Telnyx number rings, but the AI doesn't answer | The number isn't assigned to the connection, the FQDN has a different domain than the “Voice on the phone” section, the number format isn't +E.164, or the “Phone number” in Elbuz is different |
Compare the connection with step 2 and the number in the section with the Telnyx number |
| The settings are correct, but there's still no answer | “Answer calls” or the AI employee itself is turned off | Check both toggles (troubleshooting in the voice article) |
| Inbound calls work, but a test or outbound call doesn't go through | The customer's country isn't in the profile's International Allowed Destinations, the profile isn't selected in the connection, or the account is a trial | Add the country to the Outbound Voice Profile and select the profile in the connection (outbound in Telnyx) |
| An outbound call doesn't go through, and the country is allowed | “Line login” or “Line password” doesn't match “Outbound calls authentication” | Re-enter them from the connection (outbound in Elbuz) |
| “Outgoing calls are not set up: enter the line login and password and turn on answering calls” | The line login or password is missing, or “Answer calls” is off | Fill in both fields and turn on the line |
| “It is outside calling hours now” | “Test call” was clicked outside “Call during hours” — the call never reached Telnyx | Try again during calling hours or extend the hours (queue) |
| “Could not set up call reception: …” | The voice platform rejected the settings; the reason is after the colon | Fix the number or login and change any field again — the setup will be retried |
FAQ
Do I need Telnyx API keys?
No. The voice AI receives calls through the SIP connection, and outbound calls use that connection's username and password. Elbuz has no Telnyx API driver, so there's nowhere to enter keys.
Do my managers' calls through Telnyx get into the call log?
No, only the AI employee's conversations. To log employee calls, you need an operator connected in “External services and integrations”, for example Zadarma or Binotel.
Do I need to enter Telnyx IP addresses?
No. For the “Telnyx” operator, Elbuz accepts calls from Telnyx signaling addresses in all regions, so you can choose any “SIP region” in the connection.
What should I enter in “SIP server” for Telnyx?
Nothing: an empty field means sip.telnyx.com. Optionally, for the Europe region, you can enter sip.telnyx.eu.
Can I use Telnyx Call Control, TeXML, or AI assistants?
No. Elbuz works with Telnyx only as a SIP operator; the conversation is handled by the Elbuz AI employee.
Can I connect two Telnyx numbers to the AI?
No. One number and one AI employee per account, regardless of the operator.
Where to find it and who has access
- Menu
- Directories → Contacts → Pulse → “Agents” tab
- From the “Agents” tab
- “Agent settings” on the AI employee card → “Voice on the phone” section
- Telnyx portal
- Real-time Communications → Voice → SIP Trunking
- Access right
- “Management” — only this right shows the “Voice on the phone” section
- Prepare
- a paid Telnyx account and a number bought in it
There's no separate Telnyx entry in “External services and integrations”, and you don't need one: all setup is in the “Voice on the phone” section.
Related topics
- To set up what the AI tells customers and when it calls — AI employee on the phone.
- If you don't have an AI employee yet — AI employees.
- If you need both a log of managers' calls and the AI on one number — Zadarma and Elbuz.
- If you're still choosing an operator — Telephony in Elbuz.
