↑↓ selectEnter openEsc close

    1. Elbuz
    2. Document list

    How to process documents in bulk: waybills, printing, picking, deleting

    17 min readUpdated

    Elbuz runs one action on a batch of selected documents: carrier waybills, printing to one file, a picking list, deleting with restore.

    When you need this:

    • Orders piled up without waybills — Elbuz gets a number from the carrier for each, skipping those that have one.
    • A stack of invoices to print — one PDF or a ZIP archive.
    • Packing several orders — a picking list groups lines by product and storage location: one walk through the warehouse.
    • Deleted by mistake — restore the batch from the trash within 30 days, in one click.

    Where to start: select rows with Space — a “Selected: N” bar appears at the bottom.

    What bulk actions can do

    • Select a batch — with Space, the Ins key, or everything in the filtered set at once with the “All N” button.
    • Create carrier waybills — the numbers are saved to the documents; documents that already have a number are skipped.
    • Print — all selected documents as one PDF or a ZIP archive.
    • Picking list — lines grouped by product and storage location; “Mark as collected” changes the status of the batch.
    • Merge — lines from several unposted documents of one customer move into one document.
    • Delete and restore — the batch stays in the document trash for 30 days.

    How to select documents and what you can do with them

    Select a row with Space, Ins, or the checkbox in the “Selection” column. Selections are stored on the server, per user, so they survive a grid refresh — but not closing the window: each time it opens, all selections are cleared. Once at least one row is selected, the “Selected: N” bar pops up at the bottom.

    What you can do with selected documents
    ActionWhat it doesCan it be undone
    All Nselects everything in the current filtered setyes, with the “Clear selection” cross
    Printprint forms of all selected documentsyes, nothing is changed
    Create waybill (shipping)creates electronic carrier waybillsno
    Copy tocreates a copy of each selected document as another typeyes, the copies can be deleted
    Mergemoves the lines of several documents into oneno, the source documents are canceled
    Picking lista consolidated list of products for the selected documentsthe list itself changes nothing — but the “Mark as collected” button inside the window changes the status of the selected documents in bulk
    Deletemoves documents to the document trashyes, for 30 days

    The same actions, plus “Next stage” and “Post document”, are in the row menu (right-click or the three-dot button at the row end). The number in brackets is how many documents are selected; with none selected, the action applies to the highlighted row. “Next stage” and “Post document” have no number — they always work on the highlighted row only.

    The “All N” button selects not only the rows on screen but everything in the current filtered set: workspace, chosen type, search box, stats bar card and filters — the same conditions as the grid. Before bulk deleting or creating waybills, check the “Selected” counter: if it's higher than expected, clear the selection with the cross and select rows manually.

    Merge moves the lines of several documents into one and asks which becomes the main one; the source documents are canceled and linked to it. It works only on unposted documents of one type and one contact, with at least two selected. Why it's useful in practice: the article on order processing.

    The picking list groups the lines of all selected documents by product and sorts them by storage location — the caption in the window explains why: “Items are consolidated by product and sorted by storage location - one walk through the warehouse”. At the top: the number of documents, contacts, lines, units, and the total.

    If the document's warehouse uses bins, a product line is split by bin address: how many to take from each bin — first the bins saved in the documents, then by expiry date and putaway date. More details: picking list with bin addresses.

    Bulk action bar at the bottom of the Orders list with three rows selected
    1Selected: 3 counter
    2All 29 link
    3Create waybill (shipping)
    4Merge
    5Delete selected documents
    6Clear selection
    1. Counter of the selected documents.
    2. Extends the selection to all documents in the list.
    3. Creates a shipping waybill for the selected documents.
    4. Merges the selected documents into one.
    5. Deletes the selected documents (moves them to the trash).
    6. Clears the selection.
    Context menu opened by right-clicking a row in the Orders list
    1Next stage
    2Post document
    3Print
    4Create a new document based on the selection
    5Delete (F8)
    1. Moves the document to the next status.
    2. Posts (signs) the document.
    3. Prints the document.
    4. Creates a new document based on the selected ones.
    5. Deletes the document; shortcut F8.

    How to create carrier waybills in bulk

    The riskiest item on the bar is “Create waybill (shipping)”. It creates electronic waybills with the carrier for all selected documents at once — a paid external call, and a waybill can be canceled only in the carrier's account. The dialog shows just “Selected - N”, with no cost warning, so read that number carefully. One safeguard: documents that already have a waybill number are skipped, so none gets two.

    After you confirm, the documents are processed one by one, in turn: for each, Elbuz takes the carrier from its “Delivery method” field, contacts it and, as soon as the carrier returns a number, saves it to the document.

    The server allows up to 300 seconds per document, with no cap on batch size. You see the result only at the end, once the whole batch is processed: a “Warning” window with a line per document — “Document ID”, “Status” and “Waybill”. A red status means no waybill was created for that document; the reason is next to it.

    • If the document has no delivery method, the line says “Delivery type not supported”.
    • If the document's carrier has no built-in waybill, Elbuz says so and lists the carriers that have one — for the rest, create the waybill in the carrier's account and enter the number in the document.
    • If no connection key is set up for the carrier, the line says “empty - API token”.
    • If the carrier refused — including when your carrier account is short of funds — the line shows the carrier's response text, and the document stays without a number.
    • If the document already had a waybill number, the line shows in red “Waybill already exists: number — skipped.”
    This is the path of each selected document. The three checks in the middle stop a document before the carrier is contacted, so you pay nothing for it. A number appears in the document only on the bottom “yes” branch.
    noyesyesnonoyesnoyesnoyesnoyesRight to the waybill creationwindow?No “Create waybill (shipping)” itemon the selection bar or in the rowmenu“Create waybill (shipping)” →“Create”Does the document already have awaybill number?Document skipped — red line“Waybill already exists”Is “Delivery method” filled in?Red status with the reason —document without a numberDoes the carrier have a built-inwaybill?Is the carrier's connection key setup?Did the carrier return a number?Number saved to the documentAfter the whole batch — a “Warning”window, a line per document
    • Action or result
    • Decision: the path depends on the answer

    The “Operation completed successfully” message pops up when at least one waybill was created. What happened to each document is shown in the window with a line per document.

    If the request broke off — the tab closed, the connection dropped — there's no result window at all. What counts then is how numbers are saved: documents the carrier managed to answer for already have a waybill number, the rest don't.

    Rerunning on the same selection is safe for the first group: they're skipped, and waybills are created only where there's no number. The “No waybill” card in the stats bar shows what's left. One weak spot: the number is saved only after the carrier responds, so if the connection broke right in between, the waybill may exist at the carrier without a number in the document. Check such documents in the carrier's account before rerunning.

    How much it costs. Elbuz charges nothing from its balance for a waybill: you pay the carrier at its rates, and Elbuz doesn't store the cost. What you've spent is visible only in the carrier's account. For Nova Poshta, the payer matters: if the waybill form was never opened and saved in the document, bulk creation sets the recipient as payer, cash as payment form, and the document total as declared value.

    How to print documents to a single file

    The printer icon in the toolbar and “Print” in the row menu print the selected documents, or the highlighted row if none are selected. The dialog shows how many documents will print and lets you choose the output: “1 PDF” — everything in one file, “ZIP” — a separate file per document in an archive. ZIP is selected by default.

    The printer icon inside a row prints one document without a dialog — the file opens right away in a new tab.

    The format is PDF. Elbuz picks the template itself:

    1. if the document's “Default print template” field is filled in, that template is used;
    2. otherwise, out of all templates for the type, a filled-in one is used, and among those, the one whose language matches the document's language;
    3. an empty skeleton loses to a filled-in version in another language — that's why printing doesn't produce a blank page when a template for your language was created but never filled in.

    The print form of a single document is saved in its files, so you can get back to it later from the card.

    A batch prints in one request: Elbuz builds a PDF for each selected document in turn, combines them into one file or an archive, and only then opens the result in a new tab. There's no cap on batch size and no partial result — no file until everything is built. Three things to know about printing a batch:

    • The language used to pick the template is taken from the first document of the batch and applied to all of them.
    • If a document's type has no template while the others do, that document is left out of the file. After the result opens, an orange message pops up: “Documents skipped (no print template for their type): N” — it tells you how many documents to print separately once you add a template for them.
    • Printing doesn't change anything in the documents. If the request breaks off, there's simply no file, and you can run the print again with the same selection.

    If the type has no templates at all, Elbuz replies “Could not build the print form: this document type has no print template. Add a template in the document types reference.” A batch gets the same message if no selected document has a template — then no archive or PDF is created. Templates are added in the menu, under “Print Templates”.

    How to delete documents and restore them from the trash

    On its own, only an unposted document can be deleted: for a posted one, Elbuz replies “Deletion is not possible: cancel the document posting first.” Before deleting, it asks for confirmation and shows the number.

    Deleting a batch of selected rows doesn't take posted documents: Elbuz excludes them from the batch and reports “Posted documents were not deleted (N). Cancel the posting first.” But after deleting, the selection is cleared on all rows, including the skipped ones — to get to them, you'll have to filter the unposted ones again.

    Everything deleted goes to the trash as a snapshot — header, lines and links. One action of yours = one batch, however many rows it has. Neither the “All N” button nor deleting has a cap on the number of rows.

    The order is: first Elbuz clears the selection on posted documents, then saves a snapshot of each remaining one to the trash, and only then deletes the documents themselves. So if deleting breaks off halfway, the snapshots are already in the trash.

    After you delete a batch, “Documents deleted: N” pops up right away with an “Undo” button: it's the fastest way to bring back something deleted by mistake, and the message stays for twelve seconds. After deleting a single document there's no such button — Elbuz only says “Deleted”, and you'll have to get the document back from the trash.

    The left branch is deleting one document, the right one is deleting a batch. Both end in the trash, but only a batch gets the “Undo” button.
    noyesnoyesnoyesmissed it“Delete” → confirmationRows selected?Is the highlighted document posted?“Deletion is not possible: cancel thedocument posting first.”Snapshot to trash, documentdeleted — “Deleted”Posted ones are excluded from thebatch and the selectionAny unposted left?Nothing deleted — only “Posteddocuments were not deleted (N)”, no“Undo”A snapshot of each remaining onegoes to the trashDocuments deleted, selectioncleared“Documents deleted: N” and the“Undo” button — 12 seconds“Document trash” — 30 days
    • Action or result
    • Decision: the path depends on the answer

    Later, you restore a batch from the menu, under “Document trash”. It shows the date, the author, the list of documents and a restore button; a batch already restored is marked “Restored”. An empty trash says so: “Trash is empty - no documents deleted in the last 30 days”.

    Who deleted a document and when is also shown in the operation log — that's also where the second trash, for contacts, is: Operation log.

    Snapshots are kept for thirty days, and older ones are cleaned up with each subsequent deletion. Restoring brings back the header, lines and links — but not the document history: the event feed and manager comments are deleted along with the document and don't go into the snapshot.

    Burger menu of the Orders window toolbar
    1Document trash
    2Reset columns to recommended
    3Dictionaries section
    4Automation section
    1. Opens the trash with deleted documents.
    2. Resets the grid columns to the recommended set.
    3. Dictionaries used by documents.
    4. Automatic rules and email templates.

    Scenarios

    Create Nova Poshta waybills for orders that don't have a number yet

    What to do. In the type panel, choose “Customer order”. The “No waybill” card in the stats bar shows how many such orders there are and which ones. Select the rows you need with Space or the Ins key, click “Create waybill (shipping)” on the selection bar, check the “Selected” number in the dialog and confirm with “Create”.

    What you get. Documents that already have a waybill number are skipped. For the rest, Elbuz contacts the carrier from the “Delivery method” field and saves the returned number to the document. At the end, a “Warning” window with a line for each processed document.

    What won't happen. No waybill for a document without a delivery method, or for a carrier without a built-in waybill or connection key — the line shows the reason in red. If you select with “All N”, keep the “No waybill” card active so only orders without a waybill number are selected. Without the right to the waybill creation window, “Create waybill (shipping)” is missing from both the selection bar and the row menu.

    Pick goods for a batch of orders in one walk through the warehouse

    What to do. Select the orders you're packing today and click “Picking list” on the selection bar. When everything is picked, click “Mark as collected” in that window and confirm.

    What you get. The list groups the lines of the selected documents by product, sorted by storage location from the product card. The button moves the selected documents to the “Picked” status one by one, like “Next stage”: the change goes into the document history, and rules and scenarios waiting for a status change fire. Posted documents are moved too.

    What won't happen. The list itself changes nothing in the documents until you click “Mark as collected”. Documents already in the “Picked” status aren't touched. If the status directory has no status with the code collected, the button won't change any document and shows a message about it.

    Print a batch of invoices to one file

    What to do. Select the documents, click the printer icon in the toolbar, and in the dialog choose “1 PDF” instead of “ZIP”.

    What you get. The print forms of all selected documents are combined into one PDF, which opens in a new tab.

    What won't happen. If you leave the switch alone, you get a ZIP archive — it's selected by default. There's no separate language per document: the template is picked by the language of the batch's first document, so print invoices in different languages as separate batches.

    Restore a batch deleted by mistake

    What to do. While the “Documents deleted: N” message is visible, click “Undo” in it. Missed it — go to the menu, “Document trash”, and click the restore button next to the batch you need.

    What you get. The documents come back with their lines, and Elbuz says “Documents restored: N”. If another document has taken the internal record number in the meantime, the restored one gets a new record number, and the links within the batch are kept.

    What won't happen. The batch had no posted documents — Elbuz never deleted them. A link to a document that's neither among the restored ones nor in the list won't be restored. Batches older than thirty days are removed from the trash on the next deletion.

    What to do when a bulk action fails

    What you seeWhyWhat to do
    “Deletion is not possible: cancel the document posting first.” A posted document can't be deleted on its own Unpost it with the icon in the row, tooltip “Unpost”, and delete it (deleting and trash)
    “Posted documents were not deleted (N). Cancel the posting first.” The batch had posted documents — Elbuz skipped them, and after deleting cleared the selection on all rows Find those documents again — posted ones have a green check mark next to the number — unpost them and delete again (deleting and trash)
    “Could not build the print form: this document type has no print template. Add a template in the document types reference.” The document type has no print template at all Menu → “Print Templates”, add a template for this type (printing)
    “Select documents in the list - the picking list is built from the selection” The picking list was opened with no rows selected Select rows with Space and open the list again (actions on selected documents)
    “Only unposted documents of the same type and contact can be merged” The selected rows have different types, different customers, or posted documents Keep the selection only on unposted documents of one type and one customer (merging)
    “Trash is empty - no documents deleted in the last 30 days” There are no batches in the trash: either nothing was deleted, or snapshots older than 30 days were already cleaned up Nothing: anything deleted more than thirty days ago can't be restored (trash)

    FAQ

    Why did “All N” select more documents than were on screen?

    It selects everything in the current filtered set: workspace, type, search, stats bar card and filters. If “Selected” shows more than you expected, clear the selection with the cross and select rows manually.

    My selection disappeared after I closed the window. Is that expected?

    Yes. Selections are stored on the server and survive a grid refresh, but every time the window opens, Elbuz clears them all.

    How much does a waybill created in bulk cost?

    Elbuz charges nothing for a waybill: you pay the carrier at its rates. What you've spent is shown only in the carrier's account — see waybills in bulk.

    Can I print invoices in different languages in one batch?

    No. Elbuz takes the template language from the batch's first document and applies it to all of them. Print invoices in different languages as separate batches.

    Can I delete a posted document?

    No, neither on its own nor in a batch: unpost it first with the icon in the row. In a batch, posted documents are skipped and the selection is cleared on all rows — look for posted ones by the green check mark next to the number.

    Where to find it and who has access

    Menu
    Directories → Documents → any entry point, the “Selected: N” bar below the grid
    Other entry points
    row menu: right-click or the three-dot button at the end of the row
    Access right
    “Delete” is a separate right; waybills need the right to the waybill creation window
    Prepare
    for waybills — a delivery method in the document and the carrier's key

    Related topics

    Was this article helpful?

    Missing a feature? Tell us.

    We will add it for free if other users need it too.

    If only you need it, we will agree on it separately.

    Article contents

    Suggest an improvement

    Try Elbuz free