↑↓ selectEnter openEsc close

    1. Elbuz
    2. Operators

    How to take, hand over, snooze and close a chat

    15 min readUpdated

    Header buttons assign, hand over, snooze and close a chat. Elbuz returns a snoozed chat by itself and can ask the customer to rate the operator on closing.

    When you need this:

    • Taking on a customer: “Take chat” moves the chat to your “My chats”.
    • A question for another department: the new assignee is notified about the chat.
    • Waiting for a supplier: a snoozed chat returns on time and does not close by itself.
    • The messenger bot answers, but you want to talk: the bot pauses in this chat only.

    Where to start: open a chat → “Take chat” → reply to the customer.

    What you can do with a chat

    You can also assign, change the status, snooze and close from the “⋮” menu of the chat row in the list, without opening the conversation.

    How to take a chat

    The “Take chat” button is in the header while the chat is not assigned to you and you have not replied to the customer in it yet. Clicking it assigns the chat to you: it moves to “My chats”, and you see “Chat assigned to you”.

    • The button also appears on a colleague's chat. The assignment moves to you, and the colleague is not notified. Before clicking, check the assignee chip under the customer's name.
    • The button does not remove the chat from “Needs a manager” and “Unread”. Your reply to the customer does that. You cannot take a chat and stay silent: for the team, the customer is still waiting.

    How to assign a chat or hand it over to a colleague

    A handover is a change of assignee. There are two ways, with the same result:

    • the assignee chip in the second row of the header (tooltip “Assignee”; with no assignee, “Unassigned”);
    • “⋮” on the chat row → “Assign operator”.

    The list shows employees with “Chat manager” turned on. Those online are on top, with a green dot; on the right is how many open chats each has; the current assignee has a check mark.

    The new assignee gets the push notification “New chat assigned”, if they are subscribed. The previous assignee gets nothing, and the thread has no record of the handover.

    Leave what has been done and what the customer is waiting for as a note. You cannot remove the assignee without assigning someone else.

    A chat that became a ticket

    When a person is needed in a chat, it becomes a ticket with a number and a response deadline; the ticket's assignee is set by distribution or by a supervisor. Then the “Ticket #N” link appears in the line under the customer's name; it opens the “Tickets” window on this ticket.

    • The ticket assignee becomes the chat assignee. It does not work the other way: “Assign operator” in the chat does not change the ticket assignee. To hand over such a chat, change the assignee in “Tickets”.
    • Close the chat, and the ticket becomes “Solved”, if the customer has not written after the chat was closed.

    Chat statuses

    There are three statuses: “Open”, “Snoozed”, “Closed”; you cannot add your own. The status is shown by a chip in the header; to change it, click the chip or use “⋮” → “Change status”.

    “Closed” in the status menu is a full close, with no confirmation: the customer gets a request to rate the operator, as with “Close chat”. To close silently, use “Close without notification”.

    “Snoozed” in the status menu, both in the header chip and in the row's “⋮”, opens the time picker with the same options as the “Snooze” clock. You cannot snooze without a time, so the chat always comes back on schedule. Changing the status to “Open” or “Closed” removes the snooze.

    How to snooze a chat

    The clock button in the header, “⋮” → “Snooze chat”, and “Snoozed” in the status menu open the snooze options. By default these are 30 minutes, 1 hour, 2 hours, “Until tomorrow (09:00)”, “Until Monday (09:00)”. The administrator sets the list in “Chat settings” → “Snooze options”: 15 minutes, 4 and 8 hours, and “In a week” can also be added.

    For a custom time, use “Pick a time...”: the “Snooze chat” window has the “Pick date and time” field, 09:00 by default. Elbuz does not accept a time in the past.

    What changes after snoozing:

    • the status becomes “Snoozed”, and the chat appears in the “Snoozed” folder but also stays in “All chats”;
    • automatic closing of inactive conversations does not touch a snoozed chat;
    • a new customer message does not clear the status, but the chat appears in “Unread”.

    A background job running every 5 minutes returns the chat to “Open”, so “30 minutes” means 30–35 minutes. The thread gets the service line “Snooze ended — the chat is open again.”

    The header clock is highlighted only for a chat that is actually snoozed. To return it earlier, use the clock or “⋮” → “Snooze chat” → “Remove snooze”: for a snoozed chat this item comes first, with “Change snooze time” below it.

    Bookmark and “Mark as unread”

    The star in the header or on the chat row adds the chat to “Bookmarks”. Bookmarks are personal: colleagues do not see yours.

    “⋮” → “Mark as unread” returns the chat to “Unread” for the whole team. Use it when you have opened a chat but cannot reply right now, so a colleague can pick it up. The mark is cleared by an operator's reply to the customer, by closing, or by the “Mark read” bulk action.

    How to close a conversation

    The “Close ▾” button in the header and the lower part of the “⋮” menu offer three modes. Each has a “?” sign with an explanation.

    ModeWhat happensWhen to use
    “Conversation finished”the customer gets “Do you need any further help?” on behalf of the operator, and the chat stays open. If they reply, the conversation continues. If they stay silent, the chat closes itself after “Close the conversation after the question in, minutes”, if “Close inactive conversations automatically” is on (on by default), during support working hoursyou replied but are not sure the question is settled
    “Close without notification”the chat closes, and nothing is sent to the customerthe question is definitely solved, or it is spam
    “Close chat”closes the chat and asks the customer to rate the operator from 1 to 5you need the customer's rating

    The rating request is sent when “Ask the customer to rate the operator on close” is on in “Chat settings” (on by default). A real person must also have replied in the conversation, and the customer must not have rated yet. In messengers, the rating arrives in the thread as the line “Customer rated the operator: N out of 5”, in the customer's language.

    A closed chat leaves “All chats”, “Needs a manager” and “Unread”. It goes to “Archive” right away, or, if “Archive after, days” is set, after that period. If the customer writes in a closed chat, the conversation reopens:

    • in a messenger, right away, if no more than the channel's new conversation period has passed since closing (one day by default); later, a new chat is created;
    • in the website chat, within 10 minutes; until then, the chat is already visible in “Unread”.
    Chat statuses. “Conversation finished” does not close the chat; only the customer's silence closes it when automatic closing is on. A new customer message reopens a closed chat.
    “Snooze”time is up, background jobevery 5 minutes“Remove snooze”“Conversation finished”automatic closing on,manager replied last,customer is silentcustomer repliedcustomer stayed silent and“Close inactiveconversationsautomatically” is on“Close chat” or “Closewithout notification”“Close chat” or “Closewithout notification”customer wrote in theclosed chatOpenSnoozedOpencustomer was sent “Do you needany further help?”Closed
    • Start
    • State

    How to pause and resume the bot

    The bot button is in the header of a messenger chat where AI is turned on for the channel, and in a website chat that the “Tickets” policy applies to. A channel in “Operator only” mode, Rozetka and Prom have no button.

    The table below is about messengers; in a website chat, pausing stops the replies under the “Tickets” policy, and after that the widget settings apply.

    The button label shows what the bot is doing now:

    • “Pause bot”: the bot is answering the customer;
    • “Resume bot”: the bot is silent, and a manager is answering.
    What happenedWhat the bot doesHow to bring it back
    You clicked “Pause bot”stays silent in this chat in any channel mode“Resume bot”
    The mode is “AI first, then operator” or “By support policy (AI · Support)”, and you replied to the customerstays silent: a person has joined the conversation“Resume bot”
    The bot handed the conversation to a manager itself (except in “AI answers on its own” mode and with “No operator” on in the widget settings)pauses; the chat goes to “Needs a manager”, and the thread gets the note “AI handed the chat over to a manager and paused.” with the reason“Resume bot”
    The mode is “AI answers on its own”, and you replied to the customerkeeps answering—

    In a channel in “AI answers on its own” mode, the manager replies to the customer, and the bot sends its own answer right after. To talk yourself, click “Pause bot” first.

    After “Resume bot”, the bot does not write right away: it answers the customer's next message. Internal notes do not stop the bot.

    The button does not clear “Needs a manager”; a reply to the customer does. Channel modes are described in the article on support bots.

    The bot answers a new customer message only in the top state. Different events lead to the two lower states, but one button, “Resume bot”, brings it back from both.
    “Pause bot”bot handed the chat to amanager itself“AI first, then operator” or“By support policy (AI ·Support)”, and the managerreplied to the customer“AI answers on its own” andthe manager replied to thecustomer“Resume bot”“Resume bot”Bot is answeringheader shows “Pause bot”Bot is pausedheader shows “Resume bot”Bot is silent because a managerrepliedheader shows “Resume bot”
    • Start
    • State

    Scenarios

    Waiting for a supplier's answer

    A note in the “Details” panel: “Waiting for the price until tomorrow”. Then the clock → “Until tomorrow (09:00)”. In the morning the chat is “Open” again, and the note reminds you where you left off.

    A question for another department

    A note with what has been clarified, then the assignee chip → the colleague. They get a notification, and the chat appears in their “My chats”. If the header shows “Ticket #N”, change the assignee in “Tickets”.

    The Telegram bot does not know the answer

    The bot handed over the customer: the chat is in “Needs a manager”, the bot is paused, and the reason is in the note. The manager replies, then clicks “Resume bot”, and the bot handles the next routine question.

    What to do when something goes wrong

    What the manager sees and what to do about it
    What you seeWhyWhat to do
    You took the chat, but it is still in “Needs a manager” the folder is cleared by a reply to the customer or by closing, not by assignment reply to the customer (take a chat)
    The customer gets replies from both the manager and the bot the channel is in “AI answers on its own” mode “Pause bot” before your reply (bot)
    You clicked “Resume bot”, but the bot wrote nothing the bot answers the customer's next message wait for the customer's message (bot)
    You snoozed for 30 minutes, but the chat is still “Snoozed” a few minutes later the status is returned by a background job every 5 minutes the clock in the header → “Remove snooze” (snooze)
    After “Conversation finished”, the chat stayed open “Close inactive conversations automatically” is off, or the customer replied close it manually (close)

    FAQ

    Will a colleague know I took their chat with “Take chat”?

    No, there is no notification. When taking over a chat, agree with the colleague or leave a note (take a chat).

    Will a snoozed chat disappear from the list?

    No. It appears in “Snoozed” and stays in “All chats”. “Open” returns within 5 minutes after the set time, or you can return it manually (snooze).

    Why didn't the customer get a rating request?

    There is none if the chat was closed with “Close without notification”, “Ask the customer to rate the operator on close” is off, only the bot replied in the conversation, or the customer has already rated (close).

    Where does “Ticket #N” in the chat header come from?

    The chat became a ticket because a person is needed in it. Change the assignee in “Tickets”: the assignment carries over from there to the chat, but not from the chat to the ticket (details).

    Can I close or assign several chats at once?

    Yes: the checkboxes on avatars in the list and the “Selected: N” panel (bulk actions).

    Where it is and who has access

    Menu
    Organizer → Chat dialogs → open a chat
    Other entry points
    the “⋮” menu of the chat row in the list
    Access right
    the “Chat dialogs” window and “Chat manager” in the employee card
    Prepare
    snooze options and rating are set by the administrator in “Chat settings”

    Related topics

    Was this article helpful?

    Missing a feature? Tell us.

    We will add it for free if other users need it too.

    If only you need it, we will agree on it separately.

    Article contents

    Suggest an improvement

    Try Elbuz free