A password alone won't get anyone into Elbuz: the app also asks for a code from an e-mail (two-factor authentication), blocks password guessing, and can admit employees only from allowed addresses. Some you turn on, some is always on.
When you need this:
- A password may have been stolen — without the code from the employee's e-mail, nobody signs in.
- Someone is guessing passwords — after five failed attempts, sign-in closes for 15 minutes.
- A warehouse account — sign-in from the warehouse only, not from home.
- An employee stepped away — a password lock covers the screen.
Where to start: Account → System settings → the “Sign-in security” section.
What sign-in protection does
- E-mail code — after the password, the app asks for a six-digit code sent to the employee's e-mail.
- Remembered devices — a verified browser isn't asked for the code for up to 365 days; revoked with one button.
- Guessing protection — always on, nothing to set up.
- IP access — sign-in only from the addresses you list.
- Screen lock — a password lock after inactivity.
- One sign-in, one session — a new sign-in under the same login closes the previous one.
How to turn on the e-mail code
The e-mail code is two-factor authentication: to sign in, knowing the password isn't enough — you also need access to the employee's mailbox. It's off by default.
- Open Account → System settings, the “Sign-in security” section.
- Turn on “Confirmation code by e-mail”.
- Check that employee cards have an e-mail filled in: anyone without an address isn't asked for a code.
1
Sign-in security section2
Confirmation code by e-mail3
Remember the device, days4
Lock the screen after inactivity- Sign-in security — the section of system settings that holds all sign-in protection options.
- Confirmation code by e-mail — after the password, the employee must enter a code sent by e-mail.
- Remember the device, days — how long a verified browser is not asked for the code again; available once the code option is on.
- Lock the screen after inactivity — covers the screen with a password lock when the employee steps away; 0 means never.
The code is requested when four conditions are met: the global setting is on, “Ask for the code from e-mail when signing in” is on in the card, the card has an e-mail, and the browser isn't remembered. New employees have the card switch on. To turn the code off for one person, use their card, “Access & role”.
1
Ask for the code from e-mail when signing in2
Remembered devices- Ask for the code from e-mail when signing in — per-employee switch that requires the e-mail code at sign-in.
- Remembered devices — shows which browsers are remembered; here none yet, so the code is asked at every sign-in.
What the employee sees
After the password, the “Sign-in confirmation” screen opens: “We have sent a code to …”. The “Your Elbuz sign-in code” e-mail contains six digits and the IP address the sign-in comes from. If it wasn't the employee signing in, the e-mail advises changing the password.
| Rule | Value |
|---|---|
| How long the code is valid | 10 minutes |
| Wrong entries | 5 — after that the code is void and you have to sign in again |
| Resending the e-mail | “Send the code again”, no more than once a minute |
| A different account | “Sign in with another account” |
How remembered devices work
The code screen has a “Do not ask for the code on this device for … days” checkbox. With it, the browser is remembered and later sign-ins skip the code. The number of days is set by “Remember the device, days” in “Sign-in security”: 1 to 365, 90 by default. The field works only when the e-mail code is on.
The list of remembered browsers is in the employee card, the “Sign-in confirmation” block: device, IP, last sign-in, and the date it's remembered until. The “Revoke all devices” button forgets them all: the next sign-in asks for the code again. Everyone can revoke their own devices; other people's — anyone who has the “Users” window.
Changing the password goes further: it closes all of the employee's sessions, forgets remembered devices, and voids codes already sent.
What happens if someone guesses the password
Guessing protection is always on; you can't turn it off or configure it. The app counts failed attempts over the last 15 minutes and closes sign-in when there are too many. The sign-in form and sign-in by link are counted the same way.
| What is counted | Failures | Closed for |
|---|---|---|
| one login from one address | 5 | 15 minutes |
| one login from any addresses | 15 | 15 minutes |
| one public IP address, any logins | 20 | 60 minutes |
While sign-in is closed, the form shows “Too many failed sign-in attempts. Please try again in … min.” The countdown starts from the last failed attempt. A successful sign-in clears the failures for that login from that address. The block is recorded in the “Operation log”.
Password recovery requests are limited to three per hour per e-mail and nine from one address.
How to allow sign-in only from certain addresses
In the employee card, the “Access & role” section, enter the addresses in the “IP access” field. Separate several addresses with a comma, a semicolon, or a new line. An empty field means sign-in from anywhere.
1
IP access2
Login IP address- IP access — list of addresses the employee may sign in from; the example address was put into the field in the page DOM only, without saving.
- Login IP address — the address of the employee's last sign-in, filled in by the system.
The address is matched exactly: no ranges or masks, so write each address separately. Sign-in from any other address is rejected — by password, by link, and after the e-mail code. The “Login IP address” field next to it shows the last sign-in address: copy it while the employee is at the right computer.
How to lock the screen when an employee steps away
In the “Sign-in security” section, set “Lock the screen after inactivity” in minutes; 0 means never lock. When nobody touches the mouse or keyboard, the screen is covered by a password lock. Open windows and unsaved data stay underneath.
An employee can set a shorter time for themselves in “My settings” — the shorter of the two applies. They can't extend or turn off the global rule. Five wrong passwords in a row on the lock screen end the session.
Why two people can't work under one login
A new sign-in under a login closes all other sessions of that employee. The old tab shows the “Session ended” window: “You have been signed out, or someone signed in with your login on another device.” Unsaved data stays on the page — sign in again in a new tab and come back.
If this window appears when you haven't signed in anywhere, someone else is working under your login. Change the password: all other sessions will close.
Scenarios
A manager's password may have leaked
Open the manager's card, the “Access & role” section, and set a new password. The app closes all their sessions, forgets remembered devices, and voids codes already sent. If the e-mail code isn't on yet, turn it on in “Sign-in security”.
A warehouse account — only from the warehouse computer
Ask the storekeeper to sign in from the warehouse computer. In their card, copy “Login IP address” into the “IP access” field. Nobody can sign in under this login from any other address.
An employee lost a laptop
In the employee card, click “Revoke all devices” and change the password. The lost browser no longer gets in without a code, and the sessions open on it are closed.
An employee forgot the password and locked themselves out
Wait 15 minutes from the last attempt or set a new password in their card. The block lifts by itself; the administrator doesn't need to unlock anything.
What to do when you can't sign in
| What you see | Why | What to do |
|---|---|---|
| “Too many failed sign-in attempts. Please try again in … min.” | guessing protection kicked in | wait the time shown; forgot the password — recover it or ask the administrator to set a new one |
| The password is correct, but sign-in fails | the address isn't in the “IP access” field | sign in from an allowed place or ask to add the new address to the card |
| The code is turned on, but nobody is asked for it | no e-mail in the card, the card switch is off, or the browser is remembered | fill in the e-mail, turn on “Ask for the code from e-mail when signing in”, revoke devices if needed |
| “The code has expired” or “Too many code attempts” | 10 minutes passed or there were 5 wrong entries | sign in again — a new code will arrive |
| The e-mail with the code doesn't arrive | the e-mail is delayed or went to spam; you can resend once a minute | check spam, click “Send the code again” |
| “Session ended” in the middle of work | someone signed in under this login from another device | sign in again; if it wasn't you, change the password |
FAQ
How do I turn on two-factor authentication in Elbuz?
Account → System settings → “Sign-in security” → “Confirmation code by e-mail”. The code is requested from everyone whose card has an e-mail filled in and “Ask for the code from e-mail when signing in” turned on.
How do I unlock an employee after failed sign-in attempts?
You don't need to: sign-in reopens by itself 15 minutes after the last failed attempt. If the employee doesn't remember the password, set a new one in their card.
Can I restrict sign-in to a range of IP addresses?
No. The “IP access” field matches the address exactly, so write each address separately — with a comma, a semicolon, or on a new line.
What happens after a password change?
All of the employee's sessions close, remembered devices are forgotten, and codes already sent are voided. The next sign-in on any device asks for the new password and, with the e-mail code on, for the code too.
Can two employees work under one login?
No. A new sign-in closes the previous session, and the first person sees “Session ended”. Give everyone their own user account.
Where it is and who has access
- For all employees
- Account → System settings → the “Sign-in security” section
- For one employee
- employee card → the “Access & role” section: “IP access”, “Sign-in confirmation”, remembered devices
- For yourself
- “My settings” → “Lock my screen after inactivity”
- Access rights
- the “System settings” window for the “Sign-in security” section; the “Users” window to edit other people's cards and revoke their devices
Related topics
- To add an employee or give sign-in by link — how to add an employee and give them access.
- If a person signs in but sees the wrong things — access rights.
- To find out who signed in or revoked devices and when — operation log.
- For the other settings in this section — system settings.
