Elbuz records every put-away, transfer and recount as a document, so a bin shows the current quantity, and the log shows why. A transfer does not change warehouse stock.
When you need this:
- A delivery has arrived — you enter bins in the invoice and can split one line across several.
- Goods have an expiry date — the batch and date travel with the goods into the bin, and the earliest date goes out first.
- Goods are in the wrong place — a transfer changes the address, not the stock.
- The quantity doesn't add up — recounting one bin doesn't stop the warehouse.
Where to start: receiving into bins.
What a storekeeper can do
- Put-away — goods already in stock with the “Move” button, new goods in the invoice.
- Bin transfer — a separate document; warehouse stock doesn't change.
- Batches and expiry dates — the batch and expiry date in each bin.
- Bin count — the difference for a single bin is posted right away.
- Movement log — every bin change with the quantity before and after and a link to the document.
- Scanner screen — receiving and transfers from a phone or handheld terminal.
How to put away and move goods
Goods already in the warehouse
On the “Stock by bin” tab, select a “Not placed” row and click “Move”. Fill in “To”: scan the barcode or type the address. The full quantity is already filled in; reduce it if the goods go into several bins. Elbuz creates and posts a “Bin transfer” document itself, and warehouse stock doesn't change.
1
What and from where2
“To” field3
Quantity- The product, where it is taken from and how much is there.
- Scan a barcode or type an address in “To”.
- The full quantity is filled in; you can reduce it.
New goods from a purchase invoice
In the card of an unposted invoice, click “Bins”. The button appears only on documents of a warehouse with bin locations turned on.
1
“Bins” button- The button appears only on documents of a warehouse with bin locations turned on.
Fill in “To” on every line. To put one line in several places, click the plus at the end of the line: a line with an empty bin and quantity is added.
1
“To” field2
Split into several bins3
“Save bins” button- The bin where the product already is comes prefilled; you can scan or type an address.
- The plus adds a line for a second bin of this product.
- Without saving, posting puts the goods into “Not placed”.
Click “Save bins”, then post the invoice. Until the document is posted, nothing changes in the bins. The quantity for a product can't exceed the quantity in the document: “More is entered for a product than in the document.” An unknown address isn't saved: “Bin not found in this warehouse”.
On receipt, a suggestion doesn't count until you save it. The address in “To” may be filled in ahead of time by a put-away rule. Posting reads only saved bins, so without “Save bins” the whole receipt becomes “Not placed”.
Goods without a bin also become “Not placed” — posting doesn't stop because of it, and you can put them away later. If a bin ends up holding more than its capacity, Elbuz shows “Capacity exceeded” with the address but doesn't block it: the goods may already physically be there.
Between bins
On the “Stock by bin” tab, select a row, click “Move”, and enter “To” and the quantity. Elbuz immediately creates and posts a “Bin transfer” document: warehouse stock doesn't change, and two lines appear in the log. You can't move more than the bin holds: “Not enough goods, available” plus the available quantity.
To move several products at once, use the document itself. In the “Inventory” workspace, click “Add” → “Bin transfer”, choose the warehouse and products: the “Bins” button appears as soon as the warehouse is chosen, and clicking it saves the warehouse and opens the window.
In the “Bins” window, an empty “From” puts goods away from “Not placed”, and an empty “To” returns them to “Not placed”. Save the bins and post the document. The “Move” window can't return goods to “Not placed”.
On posting, the quantity is limited to what is there: if the bin now holds less than planned, whatever is there gets moved.
How to track batches and expiry dates
The batch and expiry date are entered at receiving: in the “Bins” window of the purchase invoice or on the scanner screen. For goods already in the warehouse, these fields are in the “Move” window for a “Not placed” row. Both fields are optional. The batch is a code, the expiry is a date.
Batch codes are stored in upper case without leading or trailing spaces: “abc” and “ABC” are the same batch. Avoid letters with diacritics in codes: the database treats such variants as identical. If only a date is given, the date itself is the batch, so goods with different expiry dates in one bin don't mix. If different dates are entered for one batch in a bin, the earlier one applies; an empty date doesn't erase it, and unposting doesn't bring back the later date.
1
Batch2
Best before- The batch code is optional.
- Outbound uses this date to choose what to take first.
- Outbound. Within a location type, goods with the earliest expiry go first, then goods without one by put-away date.
- Expired. Elbuz doesn't offer them in suggestions, the picking list or waves unless you enter that bin in the document by hand. Posting takes them last, before “Blocked” locations, so the bin stock matches the records.
- Transfer. The batch and date travel with the goods only into a bin, including a bin in another warehouse. If the sending warehouse doesn't use bins, the date is entered in the “Bins” window. A transfer between warehouses without a receiving bin, a return to “Not placed” and a receipt without a bin lose the batch and date: “Not placed” doesn't keep batches, so you enter them again at put-away. On the “Stock by bin” tab, each batch is a separate row.
- Warehouse batch inventory. If it's on, the expiry date from the receipt also goes into the warehouse batch.
1
Batch2
Best before- Each batch is a separate row.
- The best-before date is shown for each batch.
A recount works by product in the bin, not by batch: a shortage is written off first from the batch with the earliest expiry, and expired goods last.
How to check a bin: recount and log
On the “Locations” tab, select a bin and click “Count”. The window lists the bin's products with “On record”, “Picked, not posted” and an “Actual” field. “Actual” is prefilled with the record minus picked: enter what is really on the shelf, and the picked goods are written off when their document is posted. Found someone else's product in the bin? Scan it into “Add product: barcode or SKU”; it looks for an exact match on barcode, SKU or manufacturer code.
1
Add product2
“Actual” field3
“Post” button- Scan a product here if it is not in the bin list.
- Enter the counted quantity in “Actual”; the difference changes warehouse stock.
- “Post” creates and posts the stock count right away.
The “Post” button creates and immediately posts a regular stock count. Warehouse stock changes by the difference, the bin becomes equal to the actual count, and other bins don't change. When there is no difference, no document is created: “No differences, no document needed.”
Example with picking: 10 on record, 4 picked. 6 on the shelf — no difference, no document. 5 on the shelf — a real shortage of 1, so the warehouse and the bin drop by 1. Picked goods count during an unfinished task too; a canceled task and a posted document don't count. This column doesn't distinguish batches: the shortage comes off the batch with the earliest expiry.
If a product has a mismatch and the actual count differs from the record, the bin recount closes it: warehouse stock becomes the sum of the bins after the recount. When the actual count matches the record, there is no document and the mismatch stays: then do a stock count of the warehouse.
For example, the bins hold 8 units (U-01 — 6, U-02 — 2) and the warehouse 5. You enter actual U-01 = 3: the bin becomes 3, U-02 stays 2, the warehouse stays 5, and the mismatch is gone.
If stock counts are set to work “via acts”, bin recount isn't available: such a document doesn't change the warehouse. Elbuz prompts you to switch the method, which is set in the “Working scheme” wizard (about stock counts).
How to find where goods went
The “Movement log” tab shows every change in existing bins (entries of a deleted bin disappear): date, address, product, signed quantity, “Before” and “After”, the document, its type and the user. The document number opens its card. Enter an address in “Scan or address” to see the history of that bin and nested locations; type a name in the “Product” column filter to see a product's history. New rows are on top.
1
Quantity and stock2
Document- Signed quantity, with “Before” and “After” for this bin next to it.
- The document number opens its card.
Only changes made by documents get here. Import and the API change warehouse stock, not bins; look for them in the warehouse movement log. In the card of a posted document, the “Bins” button shows its movements as a separate list.
How to receive and move goods from a phone or scanner
The screen shows warehouses with bin locations turned on and modes: “Picking”, “Receiving”, “Transfer”, plus “Replenishment” and “Packing” if the warehouse needs them. It doesn't work offline. The scanner must send the code followed by Enter; without a scanner, you can type the code. In Chrome on Android there's a camera button next to the field; on iPhone there isn't.
1
“Picking” mode2
“Receiving” mode3
“Transfer” mode4
“Replenishment” mode5
“Packing” mode- Picking follows the tasks created on the “Tasks” tab.
- Receiving puts unposted receipts away into locations.
- Transfer moves stock from scan to scan.
- Available on a warehouse with replenishment rules.
- Available on a warehouse with packing turned on.
Receiving
Choose a purchase invoice or scan its number, then scan a product. Enter the quantity, the batch and expiry date if needed, then scan a bin or tap a suggestion. Each line is saved right away, and you can remove a wrong one. The “Post the document” button is available to users with access to documents; if not everything is put away, the rest becomes “Not placed”.
1
Quantity2
Batch3
Suggested location- The quantity you put into the location.
- Batch and best-before date can be entered here.
- The program suggests a location; scan the one you put the items into.
Transfer
Scan the bin you're taking from, or tap “Not placed”, then the product, the quantity and the bin you're putting it in. A “Bin transfer” document is created and posted. When putting away from “Not placed”, you can enter the batch and expiry date.
Scenarios
A delivery doesn't fit in one bin
What to do. In the invoice, “Bins” → on the product line, enter the first address and quantity → plus → the second address and the rest → “Save bins” → post the document.
What you get. The goods sit in two rows, and the “Movement log” tab has two entries with the invoice number. With the “Where it already is, then empty” rule, the next delivery of this product already suggests the bin where it is in the “To” field.
Goods are in the wrong bin
What to do. “Stock by bin” tab → the row of the bin where the goods are on record → “Move” → the address where they actually are.
What you get. The address in Elbuz becomes correct, and warehouse stock doesn't change. If the goods are really missing rather than lying elsewhere, do a bin count; then warehouse stock goes down.
What to do when something goes wrong
| What you see | Why | What to do |
|---|---|---|
| After a receipt, all goods are in “Not placed”, though the address was in the field | The address came from a suggestion, and “Save bins” wasn't clicked | Put the goods away with the “Move” button (about receipts) |
| “Bin not found in this warehouse” | The document's warehouse has no such address or barcode, the location is turned off, or it's a cart or consolidation location, where goods aren't put | Check the address on the “Locations” tab and the “Active” checkbox |
| A “Bin transfer” document is posted, but the bins didn't change | Bin locations are off in the warehouse: the document posts but doesn't move bins | Unpost, turn on bin locations for the warehouse and post again |
| A “Mismatch” appeared after unposting an old receipt | The receipt's bin has been deleted, and the goods were moved from it to another bin earlier: the warehouse went down, but the goods stayed in the other bin | Count the goods and recount the bin |
| “The document is already posted. Unpost it to change bins.” | Bins can be edited only in an unposted document | Unpost, change the bins, post again |
FAQ
Why did the batch disappear after a transfer?
The batch and expiry date travel only into a bin. Without a receiving bin, or when goods return to “Not placed”, they are lost.
I picked the wrong bin in an invoice that's already posted. What do I do?
Move the goods with the “Move” button; it's simpler than unposting. Bins in the document itself can be changed only after unposting.
Does a bin recount stop the warehouse?
No. Only the selected bin is recounted, the rest of the warehouse keeps working, and the document is posted right away.
Where can I see the movements of a single bin?
On the “Movement log” tab: enter the address in “Scan or address”. Stock changes from import or the API don't appear there; they are in the warehouse movement log.
Where to find it and who has access
- Menu
- Directories → Base product catalog → Bin locations
- Other entry points
- the “Bins” button in the document card; the scanner screen on a phone
- Access right
- the “Bin locations”, “Document bins” or “Scanner screen” windows
- Prepare
- a warehouse with bins and bin locations turned on
Related topics
- For the big picture — bin locations in a warehouse.
- If you don't have bins yet — setting up bin locations.
- When it's time to pick goods — picking and packing.
- If warehouse documents are new to you — how to receive, write off and count goods.
- If warehouse stock changed without a document — warehouse movement log.
