Elbuz applies global pricing rules to all price lists at once: you set the ladder by category once, and supplier discounts stay in their price lists.
When you need this:
- Twenty suppliers, one policy — the global ladder by category prices every price list.
- One markup table, separate discounts — the “Global and own” mode combines both rule sets.
- All sources need a new scheme — the “Markup” menu switches the mode and disables old thresholds in bulk.
- Unclear which set a rule went to — the banner above the grid shows which rules you are editing.
Where to start: open the global rules from the “Pricing rules” menu.
What global rules can do
- One ladder by category — works in all price lists from the first import.
- Two rule sets — global rules and price list rules, and how to tell them apart.
- Source mode — only own rules, only global rules, or both sets together.
- Order — discount before threshold or threshold before discount.
- Bulk actions — the mode and disabling own thresholds for all sources at once.
How to set a ladder by category for all price lists
You have twenty suppliers, each with its own price list, but the store has one pricing policy: this much margin on home appliances, that much on accessories. You don't need to enter this ladder in each source separately. That's what global rules are for.
Open it from the menu: Directories → Processing price lists → Pricing rules. Same layout — tree left, grid right — but a banner sits above the grid: “These rules apply to sources in the “Only global rules” and “Global and own” modes. The apply markup button recalculates prices of all such sources.” That's how you know you're editing the global set.
The button skips sources in the “Only this source's rules” mode (when prices are recalculated).
1
Banner: which sources these rules apply to2
First tier of the ladder3
Coefficient column- The banner above the grid explains that these rules apply to sources in the “Only global rules” and “Global and own” modes.
- The first tier of the ladder: prices up to 200.01 get the highest coefficient, 1.9.
- The coefficient column: it falls step by step as the price range grows.
From there it's the usual routine: pick a category in the tree, add ladder tiers, move on to the next category. In a large catalog such a ladder spans hundreds of categories with about ten tiers each — several thousand rules that someone set once and that then calculate prices in all price lists.
The “Copy markup rules from another price list” button isn't available here: there is nothing to copy from, since there is only one set.
The global ladder works in any mode
Some markup types have “Settings source: category directory” in their name. They read only the global set — always, in any price list whose chain includes them.
A new price list gets four such types: three of them read the global rules, and the fourth takes the “Delivery” field from the category card. So the global ladder by category applies to your price list's products from the very start, with nothing extra to turn on.
The source mode in the card's “Prices” section does something else: it decides whether the types that read price list rules — for a new source, “All types of markups” — will also read the global rules. By default, a source uses them to read only its own rules; how the other modes work is covered in source rules mode.
How to tell which set a rule went to
There are two sets: the rules of a specific price list and the global rules. The window is the same and looks identical, so you can't see which set a row you just saved went to. Here's how to tell.
| Sign | Price list rules | Global rules |
|---|---|---|
| Opened from | the “Pricing” tab of the source card | the menu, the product grid context menu, the “Markup” menu of the price list list, the category card |
| Banner above the grid | “Source mode: …”, if anything other than “Only this source's rules” is selected | “These rules apply to sources in the … modes” |
| Copy from another price list button | yes | no |
| Which types read them | “Settings source: price list” and “All types of markups” | “Settings source: category directory” — always; price list types — depending on the source mode |
A consequence worth knowing in advance: you can create a rule correctly and get nothing if the price list's chain has no type that reads your set.
A new price list has only one “price list” type in its chain — “All types of markups (percentage, coefficient, value, threshold markup)”. Remove it from the chain, and the price list rules stop working, even though they are still in the grid.
Older price lists have a different chain: almost all specialized types, often without “All types of markups”. There, price list rules are split by form: a category-plus-percentage rule is read by “By category. Settings source: price list.”, a category-plus-thresholds rule by “Threshold markup by category. Settings source: price list.”.
It works the same way; the only difference is which chain row to look for when something doesn't work (full list of types).
How to combine global rules with price list rules
The threshold markup table is often the same for all suppliers, but discounts differ: one gives −10% on the whole price list, another −18% plus a brand discount. With the table in each source, changing one threshold means editing every price list. The source mode keeps the table in the global rules and the discount in the price list's rules.
You choose the mode in the source card, “Prices” section, in the “Which markup rules to apply” list. The mode is saved immediately, and prices change on the next price list import or after “Apply markup to products”.
The mode applies to types that read the price list grid: “All types of markups (percentage, coefficient, value, threshold markup)”, both “Individual markup type” types, “Settings source: price list” types and “…from price list file” types. Two types ignore it: “By availability status. Settings source: price list.” takes the markup from availability settings, and “Threshold markup per category from price list file” always reads only price list rules.
1
Which markup rules to apply2
Tooltip on the “?” icon3
Price multiplicity4
Delivery cost- Which markup rules to apply — the list currently set to this source's own rules only.
- The “?” icon shows a tooltip explaining that markups are applied in the order of the source's markup types list.
- Price multiplicity — the step to which the source's prices are rounded.
- Delivery cost — the amount added to the source's prices for delivery.
| Mode | What price list rule types read |
|---|---|
| “Only this source's rules” | only price list rules. New sources are created in this mode; a copy of a source inherits the original's mode |
| “Only global rules” | the entire global set — rules both without and with a category. The price list's own rules stay in the grid but are not read. One more difference: in this mode, threshold types with a manufacturer move up in the chain to right after the exchange rate |
| “Global and own: own first” | price list rules and global rules without a category; within a type, price list rules go first |
| “Global and own: global first” | the same, but global rules go first |
In the “Global and own” modes, global rules with a category are not added to price list types: as before, they are applied by the “Settings source: category directory” types, in any mode.
What gets added is global rules without a category — the ones created in the global rules window with “All categories” in the chip. In the “Only this source's rules” mode, such rules don't work at all — except priority rules: those work in any mode (priority).
If anything other than “Only this source's rules” is selected, the mode is also visible on the “Pricing” tab: there is a banner above the grid, for example “Source mode: “Only global rules”. Rules set in the source are not applied.”
What is applied first: global or own rules
The order affects the price, so it is spelled out right under the list of modes: “Markups are applied in the order of the source's “Markup types” list: type by type, top to bottom. The mode sets the order of global and own rules only within a single type. Of the threshold ranges, the first matching one applies.”
So the chain of types comes first (in the “Only global rules” mode — adjusted for threshold types with a manufacturer, see the table above). If the discount and the threshold are read by different types — say, “Fixed percentage for all products” is higher in the chain than “Threshold markup for all products” — the discount is applied first in any mode.
The mode matters when both rules are read by the same type. That's the case for a new source: both the price list discount and the global threshold table are read by “All types of markups”.
| Supplier price 150, price list discount −10%, global threshold 100–200 → +30 | Result |
|---|---|
| “Global and own: own first” | 150 − 10% = 135, then the threshold: 135 + 30 = 165 |
| “Global and own: global first” | 150 + 30 = 180, then the discount: 180 − 10% = 162 |
The example works out this way when “Apply markup once” is off. When it's on, regular rules skip products that already got a threshold: in the “global first” mode the discount won't apply after the threshold, and the result is 180.
For threshold rules, the order also decides whose range wins: the first match locks the product for the type's other thresholds. In “own first” mode the source's range overrides the global one; in “global first” it's the reverse, and the own threshold applies only where the global table has no range for that price.
Threshold rules of different types stack on top of each other. In the “Only this source's rules” and “Global and own” modes, if “Apply markup once” is off, the lock is released before each specialized threshold type. A product that already got a threshold earlier in the chain gets another one — a markup on top of a markup.
A source's own thresholds stack this way when a different type reads them than the global table — typical for category thresholds in older price lists. The category-less global table and the global ladder by category stack the same way: in a new source, the first is read by “All types of markups”, the second by “Threshold markup by category. Settings source: category directory.”.
When moving to the global table, disable the sources' own thresholds (bulk action) and keep one global threshold scheme: either the table or the ladder by category.
How to change the mode for many sources at once
You don't need to switch the mode in each card. The list of price lists has a “Markup” menu: in the menu above the source list (the three-line button next to “Add”) — for all sources; in a supplier group's context menu — for that supplier's sources.
1
Global markup rules2
Markup mode for all sources3
Global and own: own first4
Disable own threshold rules- Global markup rules — opens the shared threshold rules window.
- Markup mode for all sources — the heading of the four modes that apply to every source at once.
- Global and own: own first — a source's own rules take priority within a markup type.
- Disable own threshold rules — turns off sources' own threshold rules so the global table applies.
- “Global markup rules” (only in the menu above the list) — opens the global rules window.
- Four modes under the heading “Markup mode for all sources” or “Markup mode for the supplier's sources”. The app first counts how many sources will change and asks for confirmation: “The “…” mode will be set for N of M sources. Prices are recalculated on the next price import.” All sources in scope get the mode, including disabled ones.
- “Disable own threshold rules” — affects only sources in the “Global and own” modes. It disables their enabled threshold rules, i.e. those with “Price from” or “Price to” filled in, except rules with the “Priority (discard others)” checkbox. Rules are not deleted, as the confirmation also says: “Threshold rules to disable: N, sources: M. Rules are not deleted: you can enable them again in the source's “Pricing” tab.” There is no bulk “enable again” action.
Bulk switching also affects sources that don't need a markup. Sources with fixed or recommended prices, as well as those where you deliberately disabled own thresholds, will also get the global table after the switch. Before recalculating prices, set such sources back to “Only this source's rules” — in the card or via their supplier group's context menu.
Scenarios
One ladder per category for all suppliers
Goal: in home appliances, cheap items should get a higher markup percentage and expensive ones a lower one — in all price lists.
What to set up: the window from Directories → Processing price lists → Pricing rules; in the tree — the category; one row per tier with “Price from”, “Price to” and the coefficient in “*”.
If the category has subcategories, tick “Including subcategories”. To keep a more expensive product from becoming cheaper at a tier boundary, select “Level up — keep the markup” in the “Markup at tier boundaries” list (tier boundaries).
Result: the ladder is applied by the “Threshold markup by category. Settings source: category directory.” type, present in a new source's chain from the start, in any mode. A product gets the first tier whose range covers its price. Prices change on each price list's next import or after “Apply markup to products” on the source's “Pricing” tab.
What won't happen: without “Including subcategories”, products in subcategories don't get the ladder. Products without a price don't get it either. A source's own threshold rules read by another type won't replace the ladder: a product can get both — to avoid this, see what is applied first.
One threshold table for all suppliers, each with its own discounts
Goal: one shared markup table, while each supplier gives its own discount.
What to set up:
- create the thresholds in the global rules window with the “All categories” chip;
- in the “Markup” menu of the price list list, select “Global and own: own first”;
- in the same menu, select “Disable own threshold rules”;
- in the global rules window, click “Apply markup to products”.
Result: supplier discounts stay as the price lists' own rules and are applied before the table. Before updating the catalog, check a few products in “Product markup history”.
What won't happen: if you already have a global ladder by category, it won't go away and will stack on top of the new table — keep only one of the two. Sources with fixed prices also get the table until you set them back to “Only this source's rules”.
What to do when global rules don't work
| What you see | Why | What to do |
|---|---|---|
| “These rules apply to sources in the “Only global rules” and “Global and own” modes…” | The window was opened from the menu and shows the global rule set, not the price list rules | To edit the source's own rules, open the “Pricing” tab in its card (two rule sets) |
| A global rule without a category didn't change the price list prices | The source is in the “Only this source's rules” mode: global rules without a category are not read in it | Select a “Global and own” mode — in the card or in bulk via the “Markup” menu (source rules mode) |
| After moving to the global threshold table, the price came out higher than the table gives | The source still has its own threshold rules of another type, or there is also a global ladder by category: different threshold types are applied one after another | Run “Disable own threshold rules” in the “Markup” menu of the price list list, keep one global threshold scheme and recalculate prices (what is applied first) |
FAQ
I changed the source mode — why are the prices the same?
The mode is saved immediately, and prices change on the next price list import or after “Apply markup to products” (when prices are recalculated).
Does the global ladder by category apply to a source in the “Only this source's rules” mode?
Yes. It is read by the “Settings source: category directory” types, and they work in any mode as long as they are in the price list's chain.
Can I re-enable disabled threshold rules in bulk?
No. “Disable own threshold rules” only disables them without deleting; you can turn them back on only in each source's rule grid.
Does a bulk mode change include a disabled source?
Yes: all sources in scope get the mode, including disabled ones. If there is nothing to change, the toast “All sources (M) already use this mode” appears.
Why doesn't the global rules window have a button to copy from another price list?
There is nothing to copy from: there is only one global set. Copying is available only on the source's “Pricing” tab (copying).
Where to find it and who has access
- Menu
- Directories → Processing price lists → Pricing rules
- Other entry points
- “Menu” above the list of price lists → “Markup” → “Global markup rules”; the category card
- Source mode
- source card → “Prices” section → “Which markup rules to apply”
- Access rights
- the “Pricing rules” window; bulk actions also need the right to edit price lists
Related topics
- For the big picture — how the price is calculated and when it is recalculated — see Pricing rules.
- If a supplier needs its own discount or rule — How to set a markup and discount for one price list.
- If you need to set up ladder tiers — How to make a markup that depends on the product price.
- If it's unclear which type reads the global rules — How to set up the chain of markup types.
