The seller scans products and picks a payment method; the till handles price, discounts, change and documents. Selling below the owner's limit is impossible.
When you need this:
- A queue at the till — a scan adds the product instantly; popular items without a barcode sit at hand as tiles.
- A card or promo code — the discount applies itself; points are redeemed within program limits.
- Part cash, part card — one sale, two cash receipts, change from the cash part.
- Customer went back for something — park the receipt, serve the next person.
Where to start: open the till and scan the first product.
What selling at the till can do
- Price by the till's rule — RRP or price, with the promotion on top; a discount or manual price only with a right and within the till's limit.
- Scan and search — barcode, SKU or name; “Often sold at this till” tiles.
- Customer on the receipt — search by card or phone, a new customer from the receipt, discount and paying with points.
- Promo code — Elbuz coupons shared by the till and the website.
- Payment — cash with change, card, split, QR code, gift card.
- Parked receipts — up to 10 per till.
- Receipt printing — a non-fiscal 80 mm sales receipt.
What price the till sells at
The software takes the line price from the product card by the till's rule; the seller doesn't set it. Under the product name, next to the SKU, a label shows where the price came from: “RRP”, “Price” or “Promo”.
| Product card | “RRP, otherwise price” | “Price only” |
|---|---|---|
| “RRP” is filled in | RRP | Price |
| “RRP” is empty | Price | Price |
| “Sale price” is lower than the price above | Promo, the price above crossed out | Promo, the price above crossed out |
If the “Sale price” is not lower than the base price, the promotion doesn't apply and the product sells at the base price. A price in the product's currency is converted to the default currency at the rate from the currency list if the rate is filled in; without a rate, the price is taken as is. The price rule is set in the till settings — Till settings.
Discount and manual price
Both share one limit: the price on the receipt can't go below the shelf price minus the till's “Maximum discount, %”. For example, with a 10% limit, a product priced at 825.00 can't sell for less than 742.50. Promotional products get no discount at all — the promotion already is one.
- With the “Line discount on the receipt” right, the receipt shows a “Discount, %” column.
- With the “Change the price on the receipt” right, you can enter the line price as an amount. You can always raise the price above the shelf price, and lower it down to the same limit.
- Without these rights, the line price is plain text.
The software checks the limit when the sale is completed, not just on screen. A lower price isn't silently replaced — the sale stops with the message “The price of "…" is below the till limit: the lowest allowed is …”. The customer's discount and the promo code aren't bound by this limit: the owner sets them, not the seller.
How to ring up a sale
- Scan a barcode or enter an SKU or name in the scan field and press Enter. The scanner works like a keyboard; there's nothing to set up.
- Scanning the same product again adds one more item. You can also change the quantity with the − and + buttons in the line.
- Press “Cash” (F2), “Card” (F4), “Split” (F6) or, if a payment service is connected, “QR” (F7).
1
Customer2
Scan field3
Promo badge and struck-through price4
Line discount, %5
To pay6
Cash7
Card8
Shift info9
Close shift- Customer — attach a loyalty card, phone or name to the sale.
- Scan field — scan a barcode or type an SKU or name and press Enter.
- The Promo badge and the struck-through old price mark a product sold at a special price.
- Discount, % — set a manual discount for a single line.
- To pay — the total due for the receipt.
- Cash — take payment in cash (F2).
- Card — take payment by card (F4).
- Shift number and start time for this till.
- Close shift — end the shift and print the report.
How the software finds a product
First it looks for an exact match of the barcode, SKU or manufacturer code — such a product becomes a receipt line right away. If there's no match and you've entered 3 or more characters, the software searches active products by name and shows up to 8 tiles. A single result goes onto the receipt right away.
Each tile shows a photo, the name, “In stock: …” at the till's warehouse, and the price. A tile with zero stock is dimmed — that's only a hint: the product will sell and the stock will go negative. If nothing is found, you see “Not found: …”.
1
Product in stock2
Product with zero stock (dimmed)3
Price- A tile with a non-zero stock level can be picked right away.
- A dimmed tile shows In stock: 0.
- The price is shown at the bottom of each tile.
The till can't post a product tracked by serial numbers: serial numbers aren't entered at the till, and without them the document isn't posted. Such a sale is saved unposted — what to do with it.
Often sold at this till
Under the receipt lines, the till shows up to 12 tiles on its own — the products this till sold the most units of in the last 30 days. There's nothing to set up: the seller adds bread, coffee or a bag without a barcode with one tap. A new till has no tiles until sales build up.
The “Often sold at this till:” heading with an arrow collapses and expands the tiles. The till remembers your choice in this browser.
1
“Often sold at this till” heading with arrow2
First tile- The heading of the frequently sold products block; click it to expand or collapse the tiles.
- The first tile: photo, name, stock and price. Click a tile to add the product to the receipt.
Keyboard shortcuts
| Key | What it does |
|---|---|
| Enter | Finds what you typed in the scan, customer or “Promo code or gift card” field |
| F2 | “Cash” |
| F4 | “Card” |
| F6 | “Split” |
| F7 | “QR” — paying by QR code, if a payment service is connected |
| F8 | “Return” — returns at the till |
| F9 | “Park” the receipt |
| Esc | Clears the receipt after you confirm “Clear the receipt?”, together with the customer and promo code |
| + / − | Quantity of the last line when the scan field is empty |
Customer on the receipt
The “Customer” field on the right is optional: without it, the sale goes through with no customer. Scan a discount card or enter a phone number or name and press Enter. The customer found becomes a card on the receipt with their name, card number and phone; the discount shows if it's above 0, the points balance shows if the loyalty program is on, and the order and sales receipt are recorded to them.
| What you enter | How the till searches |
|---|---|
| Card number | An exact match with the “Barcode” field in the customer card. The card of an inactive customer or a customer in the Trash won't work |
| Phone (7 digits or more) | The customer with that phone — only if the input looks like a phone number: it starts with +, 0, 38 or 48 or contains spaces, brackets or hyphens. Bare digits are searched only as a card number |
| Part of a name | Up to 8 customers by name — only for a cashier with access to the “Contacts” window. Without that access, the cashier finds a customer only by exact card number or phone |
A single match becomes a card on the receipt right away; several matches appear as a list, “Several customers found — pick one:”. To remove the customer from the receipt, click the cross on their card; clearing the receipt (Esc) removes the customer too.
1
Customer field2
Found customer3
New customer link- Customer — type a card, phone or name and press Enter.
- Each found customer is a row with card number and phone; click one to attach it to the sale.
- New customer — opens the dialog to add a customer.
If nothing is found, the till opens “New customer” right away and fills in what you typed: letters go to “Name”, a number starting with +, 0 or 38 goes to “Phone”, anything else to “Card number”. A name and either a phone or a card number are required.
1
“Not found” hint2
Name field3
Card number field- The hint says the entered card was not found and offers to add a new customer.
- Name — the new customer's name.
- Card number — pre-filled with the number that was typed in.
The till won't accept a card or phone that another customer already has — find that customer instead. You can also add a customer without searching, with the “New customer” link under the field.
The customer's discount applies on its own to lines without a promotion, and if they have points, “Pay with points (up to …)” appears under the card: the amount you enter is subtracted from “To pay”. How the discount and points are calculated — Loyalty program.
Promo code
A promo code is an Elbuz coupon, the same one that works in your online store: the till and the website take coupons from the same “Coupons” window. Enter the code in the “Promo code or gift card” field under the customer and press Enter — a “Promo code CODE: −…” badge with a cross appears under the field, and the lines are recalculated. A gift card goes into the same field.
1
Promo code badge2
Blackview line total3
Edifier line (promo price)4
To pay- The promo code badge replaces the promo code field and shows the discount percentage.
- The Blackview line total is reduced by the code discount.
- The Edifier line already has a promotional price, so the promo code does not change it.
- To pay shows the total after the discount.
| Coupon | What the till does |
|---|---|
| Percentage | A discount on lines without a promotion that the coupon covers. It doesn't add up with other discounts: the larger one applies |
| Fixed amount | Spread across those lines, but no more than their total |
| Limited to products or categories | Applies only to them; the promo code doesn't touch promotional products |
| Minimum amount | While the receipt is smaller, a warning “The promo code applies from …” shows under the badge |
| Customers only, or a per-customer usage limit | A customer on the receipt is required |
| Usage limit | Once used up — “The promo code has already been used the maximum number of times.” |
The coupon's status and validity period are checked too. The promo code applies before points: the points payment limit is calculated from the amount after the promo code. The till counts the usage limit by its own sales, and the website by its own.
How to take payment
Cash and change
“Cash” opens a dialog with the amount to pay and a “Received from the customer” field. As you enter the amount, “Change” is calculated right away; Enter or “Complete sale” finishes the sale. An empty field means “Exact amount”.
1
Received from the customer2
Quick amounts3
Change4
Complete sale- Received from the customer — type the amount the buyer hands over.
- Quick amount buttons fill in common sums; they complete the sale immediately.
- Change — the amount to give back, 476.00.
- Complete sale — records the sale.
If you received less than the amount due, the sale doesn't go through and the dialog warns “Received less than the amount due.”
Card
“Card” first asks “Has the terminal approved the payment of …?”: the till isn't connected to the terminal, so the seller runs the payment on the terminal and confirms with “Yes, approved”. “Cancel” returns to the receipt, and the sale isn't completed. The cash receipt is recorded with the payment type “Card at terminal”.
1
Question with the amount2
Yes, approved3
Cancel- The question with the amount the terminal must charge.
- Confirms that the terminal approved the payment; this is what rings up the sale.
- Closes the dialog without taking payment.
No separate terminal? PrivatBank's Terminal app on a smartphone will do: the phone accepts cards with no extra device — connect it.
Split payment
“Split” means part in cash and the rest by card. In the dialog, enter “In cash” — “By card (the rest)” is calculated on its own. If the customer gave more cash, fill in “Cash received (for change)”: the change is calculated from the cash part.
1
In cash2
By card (the rest)3
Cash received (for change)4
Change- In cash is the part of the sum the customer pays in cash.
- By card (the rest) is calculated automatically as the remainder.
- Cash received (for change) is the banknote amount handed over by the customer.
- Change is the amount to give back to the customer.
The cash part must be above zero and below the receipt total — otherwise the till won't complete the sale. The sale gets two cash receipts, for cash and for card, and a till with a PRRO issues one fiscal receipt with two payments. In the shift totals, each part is counted on its own line.
Paying by QR code
“QR” (F7) appears at the till when a payment service is connected: monobank, LiqPay, WayForPay and others. The till shows the QR code of the invoice, the customer pays by phone, and the sale is completed automatically as soon as the service reports the payment. More: Paying by QR code at the till.
Gift card
Enter the gift card code in the “Promo code or gift card” field and press Enter. Under the field you see “Gift card …: balance …” and “Gift card … · to pay …”, and “To pay” at the top shows the amount left to pay in money.
Take the rest with “Cash”, “Card” or “Split”; if the gift card covers the whole receipt, any payment button completes it with no money. More: Gift cards at the till.
Parked receipts
“Park” (F9) sets the current receipt aside together with the customer and promo code, and the till serves the next customer. Parked receipts show as “time · amount customer” buttons under “Park”.
1
Park button2
First parked receipt- Park puts the current receipt aside so you can serve the next customer.
- Each parked receipt is a button with its time and amount; click it to bring the receipt back.
- Pressing a button brings the receipt back; if the till already had another receipt open, that one is parked in its place.
- A till keeps up to 10 parked receipts; older ones are pushed out.
- Receipts are stored in the browser on this computer: another computer at the same till doesn't see them.
- Prices and discounts are checked when the receipt is paid, and the points amount has to be entered again.
Last receipt and receipt printing
After a sale, the receipt is cleared and “Last receipt” appears on the right — the order number, amount, change, and the “Open order” and “Print receipt” links. It also shows the fiscal receipt number or the PRRO error text. Which documents a sale creates — in the overview article.
1
Order number2
Open order link3
Change- The number of the receipt just completed, with its total.
- Open order opens the sales order created by the sale.
- Change — 476.00 EUR given back to the customer.
80 mm receipt printing
“Print receipt” opens a separate window with a sales receipt for 80 mm paper and starts printing right away. The receipt shows your business from the company details, the till, the cashier, number and date, lines, discount, “incl. paid with points”, “Total”, payments, the customer, points earned and the card balance.
1
Till and cashier2
Item line3
Total4
Not a fiscal receipt- Till and cashier — the till name and the cashier who made the sale.
- Item line — product name, quantity, price and line amount.
- Total — the amount due, with the card payment shown below it.
- Not a fiscal receipt — a note that this is a sales receipt, not a fiscal one.
Only the last digits of the customer's card number are printed — ****1234. At the bottom it says “Not a fiscal receipt”: this is a sales receipt for the customer, and the PRRO prints or sends the fiscal one itself. You can print a receipt for a sale from the till you're working at, or from any till with the “Work on any till without being assigned” right.
Scenarios
A coffee corner in the store
What to set up. Nothing: the “Often sold at this till” tiles build up from sales on their own.
What you get. After a few days, the seller adds coffee, pastries and bags with a tap on a tile, with no search or barcode.
A social media promotion with a promo code
What to set up. A coupon in the “Coupons” window: code, percentage, validity period and usage limit.
What you get. The same code works on the website and at the till. After the validity period ends, or once the till uses up its usage limit, it won't accept the code.
The customer left their wallet in the car
What to set up. Nothing: F9 parks the receipt.
What you get. The till keeps serving the queue, and when the customer comes back, their receipt opens with one tap — with the customer and promo code.
What to do when a sale won't go through
| What you see | Why | What to do |
|---|---|---|
| “The price of "…" is below the till limit: the lowest allowed is ….” | The discount or manual price exceeds “Maximum discount, %” | Set a price no lower than the one shown, or ask the administrator to change the limit |
| “"…" is sold at a promotional price: no extra discount is allowed.” | The product is already at its “Sale price” | Sell it at the promotional price |
| “Sale … is saved but not posted: … Open the order, fix the problem and post it.” | The document wasn't posted — most often the receipt has a product tracked by serial numbers: serial numbers aren't entered at the till, and without them posting stops (“Serial numbers missing…”). The software created no payment and no cash receipt | Open the order with the “Open order” link in “Last receipt”, enter the serial numbers in the sales receipt, post it and the order, and record the payment |
| “The sale is posted, but the fiscal receipt was not created: …” | The PRRO didn't respond or refused; the sale and payment already exist | Issue the receipt with the button in the order card — how to issue a receipt from an order |
| “Sale … was not completed (not posted or not paid). Open the order and check it.” | The same receipt was completed again, but the first sale didn't finish, or the payment wasn't recorded | Open the order and check posting and payment; the software didn't create a second sale |
| “The selected fiscal register is off or not set up. Choose another one in the till settings.” | The till's PRRO was turned off or isn't ready yet; no sale was created | The administrator turns the PRRO on, or selects another one or “No fiscal receipt” for the till |
| “Received less than the amount due: … is required.” | At the moment of completing, the sale amount was higher than the cash received — for example, the price changed after scanning | Take the required amount from the customer |
| “Split payment: the cash part must be above zero and below the receipt total.” | The cash part is zero or the whole amount | Enter part of the amount, or choose “Cash” or “Card” |
| “Promo code “…” is not valid: it doesn’t exist, is off or has expired.” | The code is neither in the “Coupons” window nor among gift cards, or the coupon is turned off or outside its validity period | Check the code and the coupon |
| “This promo code is for customers only — add the customer to the receipt first.” | The coupon is for customers only or has a per-customer usage limit | Find or add the customer in the “Customer” field |
| “The promo code doesn’t apply to the products on this receipt (promotional products get no discount).” | The receipt has no coupon products, or all of them are on promotion | Remove the promo code |
| “The promo code applies from ….” | The receipt is below the coupon's minimum amount | Add products or remove the promo code |
| “The promo code has already been used the maximum number of times.” | The overall limit or the per-customer limit is used up | Sell without the promo code |
| “Customer not found — select them again.” | The customer selected on the receipt was deleted in the meantime, or the till no longer remembers them — for example, after signing in again | Remove the customer from the receipt and find them again |
| “Paying with points is off: turn on the loyalty program in Till settings.” | The loyalty program was turned off while the receipt was open | Remove the points amount, or ask the administrator to turn the program on |
| “Not enough points: the card has ….” | The customer spent points elsewhere while the receipt was open | Enter a smaller points amount |
| “Points can cover at most … of this receipt.” | The points amount is more than the share of the receipt the program allows | Reduce the amount to the one suggested next to the field |
| “Not enough points on the customer’s card: … available, the document spends ….” — when posting the sales receipt | A receipt paid with points is posted again, but the points have already been spent | Put the points back on the customer's card — how |
| “The points in this document were spent from another customer’s card — put that customer back in the document.” | The customer was changed in a sales receipt paid with points | Put back the customer whose card was used to pay |
Messages about till access, shifts and a busy till are in Shifts and till settings.
FAQ
The product has 0 in stock — can I sell it?
Yes, it will sell, and the stock at the till's warehouse will go negative. A dimmed tile in search is only a hint.
The catalog price changed while the product was on the receipt. Which price will it sell at?
The new one: the software calculates the price when the sale is completed, even though the line still shows the old one. Scanning again won't update the price but will add an item — remove the line (×) or clear the receipt (Esc) and scan the product again.
Can I sell 0.5 kg of a product?
No, the quantity on a receipt is a whole number from 1.
The seller pressed “Complete sale” twice. Will there be two sales?
No. Repeating the same receipt returns the sale already created. A new sale is created only if the receipt was changed.
The customer has a 5% discount and the promo code gives 10%. How much does the customer get?
10%: percentage discounts don't add up; the larger one applies to each line. A fixed-amount promo code is spread after the discounts.
Where it is and who has access
- Menu
- “Directories” → “Documents” → “POS”
- Promo codes
- “Directories” → “Operations” → “Coupons”
- Access rights
- the “POS” window; price and discount — separate rights; searching for a customer by name — the “Contacts” window
- Prepare
- a set-up till; for points — the loyalty program
Related topics
- If you need the big picture of the POS — POS in Elbuz: how to ring up an in-store sale in seconds.
- If the till isn't set up yet or you need to open a shift — Shifts and till settings.
- If a customer returns a product — Returns at the till.
- If you need discounts and points for regular customers — Loyalty program.
- If you need to create a promo code — Discount coupons: how to create a promo code; if the customer pays with a gift card or wants to buy one — Gift cards at the till.
