Elbuz gathers all price list problems in one list and shows which suppliers let you down and who sells the same product cheaper.
When you need this:
- A price list failed overnight — it's the first row in “Needs attention”, with the step to take.
- A supplier got a price wrong — stop rule triggers and rejected abnormally low prices are there too.
- You're choosing who to keep — the health rating and anomalies show who breaks imports.
- Several suppliers carry one product — the spread table shows twenty products with the widest price gap.
Where to start: “List of price lists” → “All sources” → “Overview” → “Needs attention”.
What the price lists “Overview” can do
- Collects the problems of all sources in one list — what happened and what to do; a click opens the right tab of the source.
- Shows source health — average score, catalog coverage, rows without a price, imports over 14 days.
- Names the suppliers who let you down — stop rule triggers over the week and the health rating.
- Compares supplier prices — products with the largest difference between the minimum and maximum price.
- Counts items you don't carry yet — how many products aren't linked to the catalog and their total RRP.
How to see in the morning which price lists aren't working
Open the “Overview”: the first block, “Needs attention”, lists the problems of all enabled sources. Each row is one problem: the source with its supplier, “What happened” and “What to do”. Clicking a row opens the source on the tab where you fix the problem.
1
Severity pill2
What happened3
What to do4
AI button5
Show 127 more- Severity pill — Error, Warning or Tip; the list is ordered by it.
- What happened — the problem found in the last load.
- What to do — a suggested fix for the source.
- AI — asks the consultant to analyze the whole list.
- Show 127 more — expands the rest of the list.
Errors come first, then warnings, then tips. The number next to the heading counts errors and warnings, not tips. Five rows are visible; “Show N more” opens the rest.
| Severity | What happened | Where a click leads |
|---|---|---|
| Error | The last import failed or was canceled; the reason from the operation log is shown next to it, if there is one | “Log” |
| Error | “Import blocked: …” — a with the “Block” action rejected the file | “Log” |
| Warning | A stop rule with the “Warn” action; for abnormal prices, up to three “before → after” examples | “Log” |
| Warning | “N prices ignored during price selection…” — the catalog update rejected abnormally low prices | “Products”, prices highlighted |
| Tip | “Not updated for N days” — 7 days or more since the last successful import | “Settings” |
| Tip | “The source has never been loaded” | “Settings” |
| Tip | “Only N% of the source products are matched” — from 20 products and less than half matched; not for JSON sources | “Matching” |
How to read the list:
- Disabled and child sources aren't included.
- Errors and warnings come from the last import; a successful import clears them by itself. A blocked run gives both a row about the block and its own warnings.
- The row about rejected prices disappears after the next catalog update across all price lists, if the supplier has fixed the price.
- A source that used to import and now fails gets both an error and the “Not updated” tip. Without a single successful import, only the error.
Review the whole list with the “✦ AI” button
Click “✦ AI” in the block header — it's there when the list has errors or warnings. The consultant reviews up to forty problems across all enabled sources and gives a cause and one step for each, starting with errors and blocks. It always takes all sources, even in a supplier slice, and fixes nothing by itself.
The same signals in “My Day”
- “Price lists with import problems” — the last run within 7 days failed, was blocked or has warnings; under the name you see “import error”, “import blocked” or “data anomalies”.
- “Abnormally low supplier prices ignored” — sources with rejected prices and how many.
Both signals count only enabled main price lists and lead to the “List of price lists”.
How to monitor source health
Scroll the “Overview” down to “Detailed analytics”. Its strip answers the question “is it better than a week ago”.
1
Problematic chip2
Updated date3
Avg. health4
Coverage5
Imports sparkline- Problematic — limits the analytics to problem sources.
- Updated — when the analytics cache was last refreshed.
- Avg. health — average Health Score of the sources.
- Coverage — share of source products matched to the catalog.
- Imports over 14 days — a sparkline of import activity.
| Tile | What it counts | When to act |
|---|---|---|
| “Avg. health” | The average ; sources without a score are excluded, a score of 0 is included | It dropped — check “Worst by Health Score” |
| “Coverage” | — the share of price list rows that have a match in the catalog | Low — matching will pay off; where to start is in the top of unmatched sources |
| “No price” | Rows without a price in the last run of each source | A spike — someone's price column has shifted |
| “Imports over 14 days” | Runs per day; days with no runs aren't shown on the line | Look for a stopped source by the “Not updated” tip |
Below are four rings:
- “Source reliability” — the status of the last run, six segments from “Success” to “Never run”; each source in the snapshot falls into one of them.
- “Source freshness” — since the last successful run: a day, 3 days, a week, older, never. Watch the two segments on the right.
- “Catalog coverage” — “Matched” versus “Unmatched” in price list rows.
- “Price vs catalog” — “Equal”, “Catalog higher”, “Catalog lower”, “Suspicious”; linked rows only.
The “Suspicious” segment fills only when the “Product price deviation from catalog” stop rule is on. It's off by default, so the segment is zero.
How to find a supplier who lets you down
The “Anomalies by supplier (7 days)” table shows whose stop rules fired over the week: “Supplier”, “Triggers”, and “Reason” with badges like “rule name ×3”. The worst is at the top. A supplier with no triggers isn't in the table.
1
Triggers2
Rule pill with multiplier- Triggers — how many times the supplier's rules fired in the last 7 days; the list is sorted by this number.
- Reason — a pill with the rule name and a multiplier showing how many times that rule fired.
“Triggers” counts rules, not imports: one run with three rules adds three. What to do depends on the rule that keeps repeating:
| Rule | What to do |
|---|---|
| “Mass stock loss” | Check the stock column format — stock statuses |
| “Sharp drop in item count” | Contact the supplier: they send a full file one time and a truncated one the next |
| “Mass price zeroing” | Check the price column address in the source card |
| “Price-list currency change” | Check whether the source has exchange rate conversion |
Worst by Health Score
A rating of fifteen sources, lowest score first: Health, “Reliability”, “Data quality”, “Freshness”. The score is made up of reliability (40%), data quality (35%) and freshness (25%) over 90 days. Color: 80 and above is green, 50–79 yellow, below 50 red.
A stock price list without prices has “Data quality” 0, and its score is no higher than 65 even with perfect reliability. Zero quality with high reliability means “there are no prices in the price list”, not “the supplier lets you down”.
The score is averaged over 90 days, so yesterday's failure won't change it. For the current state, use “Needs attention”.
How to find who sells cheaper
The “Best source per product (price spread)” table shows the twenty products with the largest difference between “Min price” and “Max price”. A product gets in if at least two different contacts send it with a price and the prices differ.
1
Suppliers2
Spread3
Hint- Suppliers — how many suppliers offer the product.
- Spread — difference between the maximum and minimum price.
- Hint — explains how to read a large spread.
The top rows are usually a data error, not a saving. A difference of ten times or more means a foreign currency or two different products linked to one product card. How to work through it:
- Review the rows where prices differ several times over: open the product and check the linked items; break a wrong match on the source's “Matching” tab.
- Rows where prices differ by a percentage are savings: 15–30% on an item you buy regularly.
- Before deciding, check the product price history: a one-off promotion and a consistently lower price are different grounds.
What to know about the table:
- It doesn't show the name of the supplier with the minimum price — find it in the product card or on the “All products” tab.
- Unmatched rows aren't compared.
- “Suppliers” counts contacts, while the minimum and maximum come from all price lists, so both extreme prices may come from two price lists of the same supplier.
- Rows from a foreign-currency source without the “Price + exchange rate” rule aren't included in the table; the “Currency” column shows the currency from the price list.
- Action or result
- Decision: the path depends on the answer
The table writes nothing to the catalog. The product price is set by the base catalog update according to its own rules: price selection type, supplier coefficient, stock statuses, contact groups, fixed price. That's why “Min price” and the catalog price may differ. More: Choosing the supplier price.
How to decide where to start matching
The “Profit and prices” block has four tiles:
- “Unmatched to catalog” — price list items with no match: the amount of matching work.
- “Potential (Σ RRP unmatched)” — the total of unlinked items: what the products you don't sell are worth at retail.
- “RRP violations” — items where your price is below the recommended one; which ones exactly — in the source's products.
- “Below cost” — the price is below the purchase price; works when the cost price column is mapped.
Below the tiles is “Top sources by unmatched products”, fifteen rows, largest potential first. Start matching with the first two or three sources: fifty expensive items bring more than five hundred cheap ones. Clicking a row opens the source.
The potential is calculated only from the RRP column. If it isn't mapped, the potential is zero everywhere and the table is sorted by the count in the “Unmatched” column.
Why the numbers don't change right away
“Detailed analytics” takes data from two places, and they're refreshed differently.
| Data source | What it feeds | When it's refreshed |
|---|---|---|
| Snapshot — one row per source | Tiles, rings, “Worst by Health Score”, “Top sources by unmatched products” | After a completed import, actions with the price list's products, the first time a source is selected in the left panel during a session |
| Live queries | Stop rule and failure charts, sparkline, anomalies, price spread | Every time the tab loads |
The “Updated” date in the “Detailed analytics” header is the time the snapshot was last recalculated, not when the page was opened. There's no recalculate button. The tab loads once; reload it by clicking any “Detailed analytics” chip or reopen the window.
There are two sets of chips:
- Above the source grid — “All”, “Not updated for 7+ days”, “Few products”, “Poorly matched”, “Never imported”: they filter the grid only.
- In “Detailed analytics” — “All”, “Problematic” (error, block or cancellation), “Stale” (over 7 days without attempts): they limit all of “Detailed analytics”, including the charts and the spread.
“Detailed analytics” also counts disabled sources: their snapshot rows and history stay. Only deleting the price list removes a source from it; runs of a deleted source remain visible in anomalies for another seven days.
How many products from each price list are found in the catalog
Where: “Account” → “Statistics” → “Supplier products” tab.
A table for each price list: “Total products”, stock, “Found in catalog” and “Not found in catalog”, import dates. The “Export to XLS file” button exports it to Excel. The “Products” tab next to it shows catalog counters as charts over 180 days.
1
Refresh stats2
Total products3
Products import date- Refresh stats — recalculates statistics (not pressed).
- Total products — number of products in the price list.
- Products import date — when the products were last imported.
A price list's row is recalculated at the end of every successful import. If the numbers are old, close and reopen the window. If that doesn't help, click “Refresh stats”: it recalculates all enabled price lists of active contacts. This button doesn't affect the “Overview”.
Scenarios
See in the morning which price lists aren't working
Open “All sources” → “Overview”. In “Needs attention”, errors and blocks are at the top, then warnings, then tips; a click leads to the source's tab. To review everything at once, use “✦ AI”. The “Overview” doesn't restart imports: you do that in the source.
Find sources that stopped updating
Above the grid, click the “Not updated for 7+ days” chip or look for “Not updated for N days” tips. A source that tries and fails every day is listed among the errors, and in the “Freshness” ring it's placed by its last successful run.
Find products that are cheaper to buy from another supplier
Match price list items to the catalog and turn on exchange rate conversion for foreign-currency sources. Open the “Overview” at the “All sources” root and go through the spread table: top rows with a several-fold difference go to match review, lower rows with a percentage difference are savings. The table won't name the supplier — check the product card.
Decide which source to start matching with
Map the RRP column in your price lists. “Top sources by unmatched products” then becomes a rating by the total value of items you don't carry; take the first two or three sources.
Decide once a month which suppliers to replace
Monthly supplier review
What to do when the numbers look odd
| What you see | Why | What to do |
|---|---|---|
| Numbers for one supplier, no spread table | A supplier header is selected — the “Overview” shows its slice | Click “All sources” and switch to “Overview” (where to find it) |
| “Failed to load data” | The request didn't reach the server or the session expired | Reopen the window; if it keeps happening, check access to price lists |
| “Updated” shows “—” | The snapshot has no sources yet | Import at least one source (where the numbers come from) |
| “Updated” shows yesterday's date although there was an import today | An interrupted import doesn't rewrite the snapshot | Check in the source's “Log” whether the run finished |
| A row with a name like “#1183” | The source has no name, or in anomalies it's a supplier whose card was deleted | Give the source a name; the deleted supplier's row disappears within seven days |
| There's no price spread table | No product comes from two contacts at different prices | Match price list items to the catalog (spread) |
| “Suppliers: 2”, but there's only one supplier | They're set up as two contact cards | Check which sources the prices come from before looking for savings |
| A source with 100% reliability among the worst | The price list has no prices — “Data quality” 0, score no higher than 65 | If it's a stock price list, nothing (rating) |
| The “Source reliability” ring doesn't add up to the “Sources total” tile | The ring counts snapshot sources including disabled ones; the tile counts enabled ones only | Add up all six segments of the ring |
FAQ
Why is the “Potential (Σ RRP)” column all zeros?
The RRP column isn't mapped in your price lists, and the potential is calculated only from it. In that case, read the table by the “Unmatched” column (where to start matching).
I clicked “Problematic”, but the tables below didn't change. Is this a bug?
No. The chip limits all of “Detailed analytics” to the filtered sources. If the numbers are the same, those sources produced them (chips).
Why is the “Suspicious” segment always zero?
It's filled by the “Product price deviation from catalog” stop rule, which is off by default. Turn it on with a threshold in the source's stop rules (stop rules).
Can I export the “Overview” tables to a file?
No. Only the table in the “Statistics” window exports to an XLS file (statistics).
Can I change the 7, 14 and 90-day periods?
No. Seven days for anomalies and stop rules, fourteen for the trend and ninety for the health score are set in the program.
Can I hide analytics without hiding price lists?
No. Analytics is part of the “Price lists” window; anyone with access to it sees analytics too.
I imported a price list, but “Statistics” shows old numbers. What should I do?
Close and reopen the “Statistics” window. If that doesn't help, check that the import finished and click “Refresh stats” (statistics).
“Avg. health” shows “—”. Why?
No source has a score yet: there have been no runs. The score appears after the first imports.
Where to find it and who has access
- Menu
- Directories → Processing price lists → List of price lists, the “All sources” root → “Overview”
- Other entry points
- price list signals in the “My Day” widget; the supplier header in the left panel
- Access permission
- the “Price lists” window; there's no separate permission for analytics
- Setup
- sources imported at least once; for price comparison, matched products
The tab has three parts: the “Needs attention” list at the top, tiles and the source grid in the middle, and “Detailed analytics” at the bottom. There's no separate “Analytics” tab.
1
Overview tab2
All sources root3
Needs attention4
Summary tiles- Overview tab — the second tab next to All products.
- All sources — the root of the list on the left; the tab shows data for all sources at once.
- Needs attention — problems of all enabled sources with what to do.
- Tiles — total sources, ready, with errors, importing, products, updated today.
Clicking a supplier header in the left panel narrows the “Overview” to that supplier's sources; the price spread table isn't shown in this slice. The six tiles above the grid stay global. To return to all suppliers, click the “All sources” root — “All products” opens — and switch to “Overview”.
Anyone who can see price lists also sees all the analytics: purchase prices of all suppliers, potential totals and the reliability rating.
Related topics
- To investigate a single source — Price list run log: run history and health score components.
- If a stop rule fires too often or doesn't fire — Stop rules and supplier price control.
- If the spread table is empty — Matching price list products to the catalog.
- If the spread showed a large difference — Product price history.
- If the catalog price differs from the spread table — Choosing the supplier price.
