↑↓ selectEnter openEsc close

    1. Elbuz

    Telephony in Elbuz: calls from the app and the call log

    11 min readUpdated

    Your virtual PBX and Elbuz work as one system: a manager calls from the customer card and sees who is calling; every call goes into the call log and customer history.

    When you need this:

    • Managers retype numbers into their phone — the app dials, the PBX connects.
    • Missed calls get forgotten — a “Missed call” pop-up, plus a “Call back” task in “Pulse”.
    • Nobody listens to recordings — AI summarizes every recorded call and adds new customers itself.
    • Not every call gets answered — a voice AI employee picks up instead.

    Where to start: connect your provider — keys, extensions and the PBX address.

    What telephony can do

    Elbuz works with ten providers: Binotel, Zadarma, Ringostat, Phonet, UniTalk, sipgate, Aircall, RingCentral, 3CX and Asterisk / FreePBX. They all connect the same way and share one interface. Two more services, Twilio and Telnyx, connect only for the voice AI employee: they have no managers' call log, so they aren't among the ten.

    Who needs it first: sales managers, since they make and take calls. Next, the owner or head of the team, who sees all company calls and how long each person talked. Warehouse staff don't need telephony.

    How telephony works

    The telephony core doesn't depend on the provider. The log, the window, the buttons and the event receiver are the same for everyone — all the differences between Binotel, Zadarma, Ringostat, Phonet, UniTalk, sipgate, Aircall, RingCentral, 3CX and Asterisk are hidden inside. You connect your provider once and then work with the same interface.

    The path of an incoming call: each column is a participant, time runs top to bottom, an arrow shows who contacts whom
    ManagerElbuzVirtual PBXCustomeralt[Manager answered][Did not answer]Hourly reconciliation with the PBX picks upwhatever did not arrive right awaycalls the company numberreports the callcustomer name or “Number not found”ringing and call card:name, city, number of documentsconversationresult, duration, call recordingmissed callcard with the “Call back” button“Request” event in the contact's feed,if the number is recognized
    • Request or action
    • Reply
    • alt — one of the options, depending on the condition
    • Note

    How the app recognizes the customer

    When the PBX reports a call, Elbuz looks for the contact by the last nine digits of the number, so the format in the card doesn't matter: “+38 (050) 123-45-67” and “0501234567” are the same for the search.

    It searches all three phone fields as well as contact persons. If the number belongs to a contact person, their company is filled in too. Deleted contacts and those in the trash are not searched.

    How the app recognizes the manager

    The manager is identified by extension: Elbuz looks for an active employee whose card has the same number the PBX is routing the call to. The log shows the employee's name from Elbuz, not the one stored in the PBX — the familiar names from your users list.

    It works the other way too. In our reply to the PBX we send the customer's name — up to 43 characters, as the provider's plugin can't fit more — and a link to their card.

    If the contact has a personal manager, that manager's extension and email are sent as well, so the PBX can route the call straight to them. Who is responsible for whom is set in the org structure and in the customer card itself.

    Why a call won't get lost

    The log is filled from two sources. The main one is the events the PBX sends at the moment of the call. The second is reconciliation: every hour, at minute 25, Elbuz queries the provider and picks up whatever didn't arrive.

    It looks back one day and checks every configured service, not just the one the button dials through. The same call is never recorded twice: the app tells calls apart by the pair “service plus call number in the PBX”.

    Put simply, if the connection to the provider drops for a few minutes, the call still shows up in the log a bit later. There's one exception, Asterisk: it doesn't provide history over , so only dialplan events fill the log.

    How to connect a provider

    Connecting takes three steps in the provider form, in this order:

    1. enter the provider's keys and click “Test connection” (step 1);
    2. fill in “Internal phone” for each employee — the “Call” button doesn't work without it (step 2);
    3. give the provider the webhook address or download the configuration file for 3CX or Asterisk (step 3).

    More details, with screenshots of the form: How to connect a virtual PBX to Elbuz.

    API keys or voice AI: what you need

    What you needWhat to set upProvider API keys
    Your employees' calls: the log, recordings and their analysis, the customer card during a call, calling from the card, missed calls as tasksthe provider in “External services” (connection)required
    AI answers calls and calls customers itself: the conversation in the log with a transcript, analysis, the customer in the , callback requests in “Pulse”the “Voice on the phone” section of the AI employee card and call forwarding in the provider's account (voice AI employee); for Twilio and Telnyx — a trunknot required

    One doesn't replace the other. Without API keys, the log will have only AI conversations, and managers' calls won't get there. Without voice AI, only people answer calls. To see all calls in one log with transcripts and analysis, set up both.

    What each provider supports

    The basics — calling from the interface and the log — work the same everywhere. The differences are in three things: whether you can play the recording, whether hourly reconciliation queries the provider, and how event receiving is set up.

    ProviderCalling from the interfaceCall recordingHourly reconciliationReceiver setup
    Binotelyesyesyesaddress
    Zadarmayesyesyesaddress
    Ringostatyesyesyesaddress
    Phonetyesyesyesaddress
    UniTalkyesyesyesaddress
    sipgateyesyes (classic and neo)yesaddress
    Aircallyes, only through the Aircall Workspace desktop appyesyesaddress
    RingCentralyes, via RingOut: in the RingCentral call log the call is recorded under the JWT owneryesyesautomatic
    3CXyesnoyes file
    Asterisk / FreePBXyesnonodialplan file
    Twiliovoice AI only, no employee call log
    Telnyxvoice AI only, no employee call log

    Where to get the keys in the provider's account, where to paste the address or upload the file, and how to route a number to the voice AI employee — see each provider's page linked in the table. For Twilio and Telnyx, the pages cover only connecting a number to voice AI.

    Why 3CX and Asterisk have no playback: 3CX gives a recording link only with separate authorization to the PBX's own file storage, and Asterisk keeps the recording as a file on your server. Either way, the log has no play button, no recording icon in the row, and no AI analysis — there's nothing to analyze.

    Why Asterisk has no hourly reconciliation: it doesn't provide history over API; all of it sits in the database on your server. Only dialplan events fill the log, so if the dialplan isn't set up, the log stays empty.

    Two more differences you'll notice in daily work. The hidden “New customer” column is filled only by Binotel and Ringostat, since they are the ones that send this flag; for other providers it's always empty, so don't build filters on it.

    And one difference you won't see until something breaks: Binotel and Phonet send events only from their own addresses — 26 and 6 respectively — and the app rejects requests from any other address. If the provider changes its addresses, events stop arriving, and you won't see an error anywhere.

    How a manager calls and sees who is calling

    • Click-to-call. “Call” in the customer card, the contact list, a document or the log: the PBX first calls your extension, then connects you to the customer.
    • The “Incoming call” card. The customer's name, city, number of documents and up to three recent orders pop up in the corner of the screen before you even pick up. You can add an unknown number right away with the “Create contact” button.
    • Missed call. The manager gets a pop-up card with a “Call back” button, and a high-priority “Call back” task appears in “Pulse”.
    • Customer feed. A finished call goes into the customer card as a “Request” event, next to notes and documents.

    More details: How to call from Elbuz and see who is calling.

    Call log

    The log holds all company calls: incoming and outgoing, connected or not, with the manager, duration, result, recording and summary. There are “Mine only” and “Missed only” toggles, nine ready-made filters, and above the table six overview tiles for the last 30 days.

    More details: Call log: how to find a call and read its result.

    AI call analysis: call summary and the customer in the card

    After every recorded call, Elbuz transcribes the conversation, writes a two-to-three-sentence summary, finds or adds the customer by number and puts the summary in their card feed. The manager adds a new phone number, email or follow-up from the conversation with buttons after checking them.

    Analysis is paid and off by default: you turn it on in the “AI call analysis” card of the provider form. 3CX and Asterisk have no analysis — recordings stay on your PBX.

    More details: AI call analysis. How AI also analyzes emails and chats: analysis of emails, chats and calls.

    Scenarios

    Managers must call back everyone who couldn't get through

    What to do. Fill in “Internal phone” in each manager's employee card. In the call log, use the “Missed only” toggle.

    What you get. When an incoming call ends with “No answer”, “Busy” or “Canceled”, the manager whose extension was ringing gets a “Missed call” card with a “Call back” button. The card stays for thirty seconds. After that the call stays in the log, and “Missed only” shows exactly these calls.

    At the same time, a high-priority “Call back” task suggestion appears in “Pulse”; as soon as a conversation with that number takes place, it is removed automatically (rules).

    What won't happen. No card if the call wasn't linked to an employee, i.e. the PBX extension isn't in any active card. No card for a call added by hourly reconciliation rather than a PBX event: reconciliation only records calls. A failed outgoing call isn't counted as missed.

    New buyers calling for the first time must get into the database

    What to do. In the log, open the ready-made “Without contractor” filter. During a call from an unknown number, click “Create contact” on the card.

    What you get. The filter shows calls not linked to any card, and the “From unknown numbers” tile counts such calls over the last 30 days. The button on the card opens a new contact form with the number already in the phone field.

    What won't happen. Without AI analysis, no contact is created automatically — see the scenario about a new buyer calling. A call is linked when it's written to the log, so rows recorded before the card existed stay “Without contractor”. Hourly reconciliation can relink only those within its last-day window; Asterisk has no reconciliation.

    A head wants to listen to managers' calls

    What to do. You need a provider that gives access to recordings: Binotel, Zadarma, Ringostat, Phonet, UniTalk, sipgate, Aircall or RingCentral. In the log, turn on the “With recording” and “Long talks” filters; the row has a “Play recording” button.

    What you get. “Long talks” selects calls with three minutes of conversation or more. The app uses the saved recording link, and if there isn't one, it requests it from the provider when you click.

    What won't happen. 3CX and Asterisk have no “Play recording” button on the toolbar at all. No link from the provider — the app replies “Call recording is unavailable”. Without the “Call log” window right, a head can't open the log; a group with a restricted filtered set sees only its slice of calls in the table and tiles.

    What to do when a call doesn't show up or the button doesn't work

    AI analysis problems are in a separate table.

    What the app says and what to do about it
    What you seeWhyWhat to do
    No “Call log” menu item and no shortcut on the desktop Usually no right to the window, so the menu item is hidden. The desktop shortcut comes only with the department set Check the “Call log” window right in group permissions. If it's there, put the shortcut back (how)
    No “Call” button in the contact list or in the card No telephony service is connected, or its active toggle is off — the buttons simply aren't drawn Check the keys and the toggle in the “Telephony” group (step one)
    “The record has no phone number” The phone field has only text, no digits. A completely empty field: the button silently does nothing Fill in the phone in the customer card or in the document
    “The phone field contains something other than a number — check the card” The field has fewer than seven digits: it holds a supplier code, an SKU or text Fix the phone field (which number gets dialed)
    “Telephony service is not connected or disabled” There is no active service with keys filled in Account → System settings → “External services and integrations” → the “Telephony” group (step one)
    “There is no integration module for this telephony service” The list has a row for a service with no module written for it All ten listed providers have modules; if one of them shows this, contact support
    “This telephony service cannot dial from the interface” The provider doesn't offer this option All ten providers support calling from the interface; contact support (provider table)
    “Your employee card has no extension number” The “Internal phone” field in your card is empty, so the PBX has nowhere to call in the first step Ask whoever has the “Users (employees)” window to enter it (step two)
    “The PBX did not answer in time. If the call did start, it will show up in the call log — check it before dialing again” The provider didn't respond in time, but the request may have reached it Check the log for the call before dialing again (call log)
    “The PBX rejected the request:” followed by the provider's text It was the that refused, not Elbuz The text after the colon is the provider's exact reply; usually expired keys or a blocked destination
    “Call recording is unavailable” The provider didn't return a recording link, or the service the call went through is disabled Check that call recording is on in the provider's account; 3CX and Asterisk never have recordings (provider table)
    “No access to the call log” Your group hasn't been granted the right to the log window Ask an administrator to open the “Call log” window for your group (who sees what)
    People call us, but the log is empty and there are no errors Either the shop domain changed or the service was recreated, so the changed and the provider still has the old one; or the provider changed the addresses it sends events from Compare the receiver address in the provider's account with the one in the connection form, then contact support (step three)
    Calls are in the log, but the “Manager” column is empty and “Mine only” shows nothing The extension the call went to doesn't match any “Internal phone” in employee cards Click “Test connection” and work through the “PBX extensions without an Elbuz employee” list (step two)

    FAQ

    Do I need a separate program on my computer to make calls?

    No. The PBX initiates the call: it first rings your extension, you pick up on the phone that extension is set up on, and only then does the PBX connect you to the customer. In this setup, Elbuz just sends the command to dial.

    What happens if one number is saved for two contacts?

    The app shows one: a company takes priority, and if all else is equal, the one added earlier. Cleaning duplicate numbers out of your contacts once is easier than wondering later why a call attached to the wrong customer.

    Can I connect two providers at once?

    Yes. The log is filled with events from both, and hourly reconciliation checks both services. The “Call” button works through one of them (switching to another provider).

    Can I send SMS through the telephony provider?

    No. Messaging is a separate service, “SMS sending”, in the same integrations list (SMS campaigns).

    How much does AI call analysis cost?

    Only AI tokens, no subscription: transcription and analysis are charged to your balance, and the connection form shows the approximate cost per minute of conversation. Analysis is turned on separately and is off by default (what the price is made of).

    Where to find it and who has access

    Menu
    Directories → Contacts → Call log
    Desktop
    the “Call log” shortcut with a phone handset icon
    Provider connection
    “External services and integrations” → the “Telephony” group
    Access right
    the “Call log” window; no right is needed just to make calls
    Have ready
    the keys from your telecom provider and your employees' extensions

    The “Call log” shortcut comes with a department whose set includes the window: in standard sets, logistics, sales and customer service. Others add it themselves: right-click “Call log” in the main menu → “Place shortcut on desktop”. To give it to a whole department, the head turns on the monitor icon in the window row.

    Who sees what

    Telephony is available to every account: there are no plan or add-on module restrictions. You either have the right to the whole call log window or you don't — there are no separate blocks inside.

    • Call log is a separate window with its own access right. During the update it was granted automatically to every group that already had the contacts window, so usually there is nothing to set up. Without the right, you get an access denied message instead of the window, and every request from the window returns “No access to the call log”.
    • The log's scope is narrowed by the group rule, just like in other list windows: a manager sees their own slice, a head sees more. The 30-day overview tiles are counted by the same rule. Everyone also has the “Mine only” toggle.
    • Anyone can make calls if their extension is filled in, even if they aren't meant to view the log. This is on purpose: people who don't need the company's call history still need the “Call” button.
    • The webhook URL and the PBX configuration file are shown only to those with access to the log, because they contain a key.
    The “Window and shortcut settings” grid filtered down to the “Call log” row
    1“Call log” row
    2Show on desktop checkbox
    1. The “Call log” row, left after typing the name into the Title column filter.
    2. The “Show on desktop” checkbox: when it is on, the Call log shortcut appears on the desktop.

    Related topics

    • If a call should go to the customer's personal manager, who is responsible for whom is set in the company org structure.
    • If you need to see calls along with the customer's full history — the contact card: the event feed, AI summary and next follow-up.
    • If a new employee needs an extension — Users (employees).
    • If AI should answer calls — AI employee on the phone.

    Was this article helpful?

    Missing a feature? Tell us.

    We will add it for free if other users need it too.

    If only you need it, we will agree on it separately.

    Article contents

    Suggest an improvement

    Try Elbuz free