↑↓ selectEnter openEsc close

    1. Elbuz

    How to get a summary of every call and create a client from a call

    5 min readUpdated

    Elbuz transcribes call recordings, writes a summary, finds or creates the client by number and puts the summary into their card — no retelling or relistening.

    When you need this:

    • A new customer calls — the app adds them to “Contacts” with their name and email.
    • A client complains — the call view shows “Complaint” and “Unhappy”; the summary says why.
    • You agreed to call back — “Schedule a follow-up” creates an event for the date and time named.
    • A second number was dictated — “Add to card” writes it into the first empty field.

    Where to start: operator form → “AI call analysis” card → “Analyze recorded calls automatically”.

    What AI analysis does

    What analysis does by itself and what only with a button

    Without a manager's confirmation, analysis does three things:

    • writes a summary — two or three sentences: who called, what they wanted, what was agreed. It appears in the “Summary” column of the log;
    • finds or creates the client. If the call is not linked to a card, the app looks for a contact by the call's number (the last nine digits, all three phone fields) and by the email the client gave during the call. If nothing is found, it creates a new one: “Customer” group, “Call” source, name and email from the call, number from the call;
    • puts the summary into the client card feed — into the “Request” event of this call (the call in the contact feed).

    Everything else AI only suggests; it reaches the card only after you press a button: a new phone or email — “Add to card”, the next step — “Schedule a follow-up”. This is deliberate: speech recognition gets digits wrong, and an unchecked second number in the card would then be dialed by every manager.

    How to turn on analysis

    Open your operator's form: Account → System settings → “Other settings” → “External services and integrations” → “Telephony” group → your operator. Or, in an empty log, click the “Turn on AI analysis” step. The form has the “AI call analysis” card:

    AI call analysis card in the Ringostat setup form
    1Analyze recorded calls automatically switch
    2Minimum talk time
    1. Switch that turns automatic analysis of recorded calls on or off.
    2. Minimum talk time in seconds — shorter calls are not analysed.
    • “Analyze recorded calls automatically” — the main switch. Off by default, because analysis is paid.
    • “Minimum talk time, sec” — 15 by default. Shorter calls (“I'll call back”, no answer) are skipped: there is nothing to tell.

    What happens after you turn it on:

    • every 5 minutes the app takes up to 10 calls that haven't been analyzed yet and analyzes them — a call already in the log with a recording is analyzed within a few minutes;
    • only calls with a recording and a conversation not shorter than the minimum are taken — from the last three days and not earlier than the moment you turned it on, so you won't get a bill for last month's calls;
    • the “Transcribe” button in the call view works for any recorded call, even when automatic analysis is off: this way you can analyze one important call without turning on analysis for all.

    How much analysis costs

    Analysis is paid only with AI tokens, no subscription. There are two paid steps — speech-to-text recognition and analysis of the text by an AI model — and both are charged to your balance by actual usage. Below the switch, the form shows an estimated cost per minute of conversation based on average speech rate and the current AI model.

    Each “Transcribe again” is a new paid analysis. Raising the “Minimum talk time” is the simplest way not to pay for short calls.

    What the call view shows

    Call log with the Summary column and the Call view button for the selected call
    1Call view button
    2Summary with AI status icon
    1. Call view button — opens the analysis of the selected call in a side panel.
    2. Summary column — a short AI summary of the call with a status icon.

    In the log, the “Summary” column shows a status icon before the text: a magic wand — “Analyzed by AI”, a triangle — “Analysis failed”, an arrow — “Not analyzed” (e.g. no recording or the file is too large). An empty cell — not analyzed yet. The cell shows the start of the summary; hover for the full text.

    Clicking the summary or the “Call view” button on the toolbar opens the panel of this call on the right:

    Call view panel of an analysed call: summary, extracted details, next step and transcript
    1Summary
    2From the call
    3Transcript
    1. Summary — what the customer wanted and how the call ended.
    2. From the call — request type, mood, products and the next step found by the AI.
    3. Transcript — the conversation text, expandable with Show in full.
    • “Call recording” — a player. The app uses the saved recording link, and if there is none, requests it from the operator when the panel opens.
    • “Summary” — the full text.
    • “From the call” — two tags. Intent: “Order”, “Question”, “Complaint”, “Delivery” or “Other”. Client's tone: “Satisfied”, “Neutral” or “Unhappy”. Below — “Client” (name from the call), “Products and orders” (products and order numbers mentioned) and “Next step” with a date, if one was named.
    • “Suggestions for the card” — with the caption “AI only suggests: only what you confirm goes into the card.” Here are “New phone” and “New email” with the “Add to card” button — only those not yet in the card — and “Next step” with the “Schedule a follow-up” button.
    • “Transcript” — the recognized text, collapsed; “Show in full” expands it.
    • The “Transcribe” button (for a call not analyzed yet) or “Transcribe again”.

    What a manager does after a call

    1. Open the call in the log — click the summary. Read the summary and tags: if you see “Complaint” or “Unhappy”, deal with it first.
    2. Check the suggestions. If the client dictated a second number or email, compare the digits with the “Transcript” or the recording and click “Add to card”. The value goes into the first empty card field in order: main phone, “Phone #2”, “Phone #3”; for email — main email, “Email #2”, “Email #3”. The button doesn't overwrite a filled field. If all three fields are taken, the app says “All fields for this contact in the client card are taken — add it manually”.
    3. You agreed to call back — click “Schedule a follow-up”. The dialog already has the date and time from the call (if only a date was named — 10:00 that day; if there is no date — tomorrow at the current hour, on the hour) and the next step text. Confirm — the call becomes a calendar event with a reminder, and “Next touchpoint” appears in the client card.
    4. Need to place an order — open the client card with the “Open card” button: their name, number and email are already there.

    Trusting digits from the call blindly. SKUs, order numbers and phones are recognized with errors: in our test, the SKU “WAN28263” was recognized as “ONE128263” in one of the runs. Before “Add to card”, check the number against the recording — especially if the client dictated quickly.

    When there is no analysis

    • No recording. Only calls recorded by the operator can be analyzed. In 3CX and Asterisk, recordings stay on your PBX, so there is no AI analysis for them (what each operator supports).
    • Recording file larger than 25 MB — roughly 25–50 minutes of conversation. Such a call gets the “Not analyzed” status with the reason “The recording is larger than 25 MB — the recognition service does not accept such files”.
    • Errors are not retried automatically. The recording couldn't be downloaded, AI answered in the wrong format, there is no speech in the recording — the call gets “Analysis failed” or “Not analyzed”, and automatic analysis doesn't return to it, so you aren't charged every 5 minutes for the same broken file. To retry, use “Transcribe again”.
    • AI unavailable — demo access. In this case the call isn't marked, and when access appears, automatic analysis will process it if the call is still within three days.
    • Language. The app recognizes conversations in any language, but writes the summary and next step in the interface language of whoever clicked “Transcribe”; automatic analysis uses the administrator's language.

    Scenarios

    A new customer calls — their card should appear without manual entry

    What to do. In the operator form, turn on “Analyze recorded calls automatically”. Don't fill anything in during the call — just ask for their name and email.

    What you get. A few minutes after the recorded call lands in the log, the client appears in “Contacts”: “Customer” group, “Call” source, name and email from the call, number from the call. Their card feed has a “Request” event with the summary. The call row in the log is now linked to this card.

    What won't happen. A second number the client named won't go into the card by itself — only with “Add to card”. If that number or email already belongs to another contact, no new one is created — the call is linked to the existing one.

    A client complains — the manager should see it without listening

    What to do. Turn on AI analysis. Once a day, the manager scans the “Summary” column in the log and opens calls whose summary is about a problem.

    What you get. The view of such a call shows the “Complaint” and “Unhappy” tags, the summary states the complaint, and “Products and orders” shows which order it is about. You don't need to listen to the recording to understand what happened.

    What won't happen. The log has no separate “complaints only” filter: intent and tone are visible in the call view, and the table shows only the summary text.

    A client asks where their parcel is

    What to do. Nothing beyond the call: AI analysis is on.

    What you get. Intent — “Delivery”, the order number the client named — in “Products and orders”. The colleague who next opens the client card reads in the feed what was asked and answered, and won't ask again.

    What won't happen. The order number from the call doesn't become a link to the document: it's text as AI heard it. Find the order in the client card or in the document list.

    You agreed to call back tomorrow at 11:00

    What to do. Open the call in the log, in “Suggestions for the card” next to “Next step” click “Schedule a follow-up” and confirm.

    What you get. The date and time are already filled in from the call, the text — “Call back…”. The follow-up becomes a calendar event with a reminder, and the “Next touchpoint” badge in the client card shows this date.

    What won't happen. The follow-up isn't scheduled by itself — without clicking the button, the agreement stays only in the summary. There is no button if the call isn't linked to a client.

    The client dictated a work number — it needs to go into the card

    What to do. In the call view, under “New phone” in the suggestions, compare the digits with the transcript and click “Add to card”.

    What you get. The number is written into the first empty of the three phone fields — usually “Phone #2” — as a regular card edit: “Card edited” appears in the feed, and a pop-up says “Added to the client card”.

    What won't happen. The button doesn't overwrite a filled field: if all three phone fields are taken, the app replies “All fields for this contact in the client card are taken — add it manually”.

    What to do when analysis fails

    What the app says and what to do about it
    What you seeWhyWhat to do
    “Not analyzed” with the reason “The recording is larger than 25 MB — the recognition service does not accept such files” The call is very long — roughly over 25–50 minutes Such a call isn't analyzed; enter the gist in “Comment” manually (when there is no analysis)
    “AI returned an answer in the wrong format — try transcribing again” A model failure; the call transcript is already saved Click “Transcribe again” in the call view — it's a new paid analysis
    AI analysis is on, but the “Summary” column is empty The call has no recording, is shorter than the minimum talk time, older than three days or earlier than the moment you turned it on; or 5 minutes haven't passed yet until the next run Check the recording icon in the row and the duration; analyze the call you need with “Transcribe” (how to turn on)
    “All fields for this contact in the client card are taken — add it manually” All three phone fields (or all three email fields) in the card are already filled Open the card and decide which number to replace (what to do after a call)

    FAQ

    Does AI change the client card by itself?

    Hardly. Analysis by itself only finds or creates the client and puts the summary into the call event in the feed. The manager adds a new phone, email and follow-up with buttons (what happens automatically).

    We turned on analysis — will it analyze last month's calls?

    No. Automatic analysis takes calls from the last three days and not earlier than the moment you turned it on. Analyze an older recorded call with the “Transcribe” button in the call view.

    What language will the summary be in?

    The interface language of whoever clicked “Transcribe”; automatic analysis writes in the administrator's language. The conversation itself is recognized in any language.

    Does analysis work on a demo account?

    No, AI is unavailable on demo access. The call isn't marked in this case: when access appears, automatic analysis will process it if the call is no more than three days old.

    How are calls with the voice AI employee analyzed?

    With the same analysis, but without speech recognition: the transcript already exists. The summary, client and suggestions appear the same way (voice AI employee).

    Where to find it and who has access

    Turn on
    “External services and integrations” → “Telephony” → your operator → “AI call analysis” card
    Other entry points
    empty call log → the “Turn on AI analysis” step
    Call view
    “Call log” → click the “Summary” column
    Access right
    “Call log”; for “Add to card” — also “Contacts” and the right to the field
    Prepare
    an operator that records calls: not 3CX and not Asterisk

    Analysis is visible to the same people who see the log. If a call is linked to a client who is not in your “Data scope”, you can't open the call view, “Transcribe” or “Add to card”.

    Related topics

    Was this article helpful?

    Missing a feature? Tell us.

    We will add it for free if other users need it too.

    If only you need it, we will agree on it separately.

    Article contents

    Suggest an improvement

    Try Elbuz free