↑↓ selectEnter openEsc close

    1. Elbuz

    How to set up bin locations: bins, labels, put-away rules

    5 min readUpdated

    Elbuz creates warehouse addresses in a range, prints barcode labels for them and suggests a bin for every receipt based on the rule you choose. An administrator sets this up once; after that, storekeepers and pickers work by address.

    When you need this:

    • You're launching a warehouse — dozens of addresses are created in one window, and labels print in a batch.
    • Each product has its own place — the pinned bin is suggested first.
    • Your storekeeper works from a phone — a QR code opens the scanner screen.
    • Part of the warehouse sits idle — a report shows dead bins.

    Where to start: the “Create bins” button.

    What the setup covers

    How to create bins and print labels

    An address is made of level codes separated by hyphens: A-01-02-03 means zone A, rack 1, shelf 2, bin 3. In the “Create bins” window, you set the zone, the “from” and “to” range for each level, and the capacity. Below the fields you can see how many bins will be created and what the first address will be.

    The “Create bins” window: zone, rack, shelf and bin ranges, capacity and a preview
    1Zone
    2Level range
    3Preview
    1. The zone code becomes the first part of the address.
    2. “From” and “to” for each level; “to” 0 turns the level off.
    3. How many bins will be created and what the first address will be.
    • Don't need a level? Set its “to” to 0. A zone and bins without racks give addresses like B-01.
    • Limit — up to 5000 bins at a time. Elbuz won't create more: “You can create up to 5000 bins at once.”
    • Running it again — existing addresses are skipped, so you can extend a range in the same window. Nothing changes for existing addresses, including capacity.
    • Capacity is saved only for the last level. An empty field or 0 means no limit.

    The number of digits depends on the “to” field. Numbers have at least two digits; with “to” at 120 they get three, so Elbuz creates A-001 instead of A-01. That's a different address: extending 1–99 to 1–120 adds a second set of racks next to the first. Plan ahead or add new numbers as a separate range from 100.

    The “Add location” button adds a single location. “Inside” and the code make up the address; the level is saved separately and doesn't affect it. Codes allow Latin letters, digits, dots and underscores, up to 40 characters; lowercase becomes uppercase. Hyphens aren't allowed: they separate levels. “Name” is printed on the label and changes nothing else.

    The “Edit”, “Count” and “Delete” buttons appear when a row is selected in the grid. Changing a code also renames all nested locations. If the barcode matched the address, it changes along with it, so you'll need to reprint those labels.

    Clearing “Active” hides the location from address and label lists, and new goods can't go into it: a document, the “Move” window or the scanner replies “Bin not found in this warehouse”. Goods already there can be recounted, moved out with “Move” and written off by documents as usual. A recount won't add new goods to a disabled bin: “This bin is off, so new goods cannot go into it. Turn it on or choose another”.

    You can delete only an empty location with no nested ones, not in an unposted document or open task. Log history doesn't block deletion, but the bin's log entries go with it. Otherwise Elbuz says what's in the way. If you later cancel an old posting that took goods from a deleted bin, they return to “Not placed”.

    The “Locations” tab: warehouse counters, the address grid, create and label buttons
    1“Not placed” counter
    2“Labels” button
    3Actions on the selected row
    4“Scan or address” field
    1. “Not placed” shows how many units are not yet put into bins.
    2. “Labels” prints all locations or those filtered by “Scan or address”.
    3. “Edit”, “Count” and “Delete” apply to the selected row.
    4. A scan or the start of an address filters the rows on the “Locations”, “Stock by bin” and “Movement log” tabs.

    How to print labels

    The “Labels” button opens a new browser tab and starts printing right away. Without a filter, it prints all active warehouse locations, including zones, racks and shelves, up to 5000 at a time. To print only some, first type the start of an address in “Scan or address” and press Enter: A-01-02 gives the shelf and its bins.

    Shelf and bin labels: the address in large type and a Code128 barcode

    Labels are 60×40 mm, one per page: the address in large type, the name if any, and a Code128 barcode. By default the barcode equals the address, so a scanned value reads as an address straight away. You can set your own barcode in the “Edit” window: Latin characters, digits and symbols, up to 64 characters, unique within the warehouse.

    In these windows, a scanner works like a keyboard: it types the code and presses Enter. In the “Scan or address” field, this applies a filter on the tabs with the location, stock and log grids. In a document's “Bins” window, it moves the cursor to the next field so you can scan rows one after another.

    What location types are for

    The type tells Elbuz where to take goods from and where to put them. In the location dialog, choose the “Location type” field; the grid has a column with the same name. You can set a type at any level: it's copied to nested locations, and “Create bins” inherits the parent's type. Without a type, everything works as before.

    TypeWhat's stored thereHow Elbuz handles it
    Pickinggoods for pickingused first for outbound; suggested for receipts only if pinned to the product or set in its card
    Reservemain stockused for outbound after Picking; suggested for receipts
    Receivingnewly arrived goodsnot suggested for outbound; suggested for receipts only if pinned to the product or set in its card, otherwise enter the address manually
    Blockedgoods that can't be pickednot suggested; written off last when a document is posted without a plan
    Carta cart location with slotsfor picking several orders onto a cart; goods aren't tracked there, and receipts and transfers into it aren't allowed
    Consolidationthe place where carts are broughtgoods aren't tracked there, and receipts and transfers into it aren't allowed

    A location from an open task can't be deleted: finish or cancel the task first. Cart slots and consolidation places aren't recounted.

    Blocked goods are subtracted from quantities exported to marketplaces and your website, whatever the free stock setting. If all free goods are blocked, the stock status becomes “Out of stock”. This affects available in YML and Google, template status settings and the Elbuz storefront. Partial blocking doesn't change the status. The product card shows “Blocked” and a lower “Available”.

    In a document, blocked goods count as taken, like a reservation: if there isn't enough free stock, the row is flagged and the order gets a banner. The AI chat and voice assistant don't call such a product available, and if all of it is blocked, they say it's out of stock.

    When the block is lifted, the previous status returns. If you or an import set another one, it stays; if the product ran out meanwhile, it stays “Out of stock”. An “In stock” status written by an import or price list while all goods are blocked is fixed right after the import, other changes overnight.

    Physical stock doesn't change. An order whose goods are already blocked isn't canceled automatically.

    The block is lifted when the goods are moved or written off, the bin changes type, or bin locations are turned off for the warehouse.

    The “Locations” tab: zones of type picking, reserve, receiving, blocked, cart and consolidation
    1Location type
    1. The type shows what the location is for: picking, reserve, receiving, blocked, cart or consolidation.

    How to set weight and volume capacity

    The “Location” and “Create bins” dialogs have “Weight limit, kg” and “Volume limit, l” fields; 0 means no limit. The generator sets them only for the lowest level. In the “Locations” grid, these columns are hidden; you turn them on in the column settings.

    Elbuz takes weight and dimensions from the product card at every calculation. The receiving suggestion takes the smallest of units, weight and volume, counts in whole units, and suggests the next bin for whatever doesn't fit. “Capacity exceeded” triggers for both weight and volume, but it's a warning, not a restriction.

    If a product has no weight or dimensions, the limit doesn't restrict it. The “Bins” window and the scanner screen (receiving, transfer, replenishment) show “no weight or dimensions: location limit not applied” next to such a product. Before relying on limits, fill in weight and dimensions in product cards.

    How Elbuz picks a bin for a receipt

    The “Put-away rule” field in the header of the “Bin locations” window sets the rule for the warehouse. The bin pinned to the product always comes first, then the address from the product card's “Stock location” field, and then the rule:

    RuleWhat it suggestsWhen to choose it
    Where it already is, then emptybins with this product, then empty onesidentical goods are stored together
    Empty, then where it already isempty bins, then bins with this producteach delivery separately, handy for batches
    Pinned bin onlyonly the pinned bin or the address from the cardeach product has its own permanent place

    The suggestion offers the pinned bin and the card address unless they're “Blocked”, then only “Reserve” and untyped locations (location types). It counts capacity in units, weight and volume: the overflow goes to the next bin as a separate row. Goods with no room get no address. Nothing is prohibited (except carts and consolidation), and you can correct the address.

    To pin a bin, on the “Stock by bin” tab click “Product bin”, scan the product, press Enter and enter the address. An empty field removes the pin. Elbuz doesn't show a list of products pinned to a bin.

    How to connect a phone or scanner

    Create a separate user for the storekeeper with the “Scanner screen” window checked. They don't need the office “Bin locations” window. One user can work in only one place: signing in on a phone ends their session on the computer. The “Scanner screen” window shows the link and QR code.

    The “Scanner screen” window: steps, a QR code and the sign-in link for a phone

    Which bins sit idle: reports

    The “Reports” tab shows the current fill level and best-before dates, and calculates turnover and dead bins for the selected period.

    The “Reports” tab: counters for the period, fill by zone and bin turnover
    1Period
    2Dead bins
    1. The period affects turnover and dead bins.
    2. Goods are there, but there were no movements in the period.
    • Fill by zone. Bins in use and total bins per zone; the “Capacity used” tile counts only bins with a set capacity. “Used by weight” and “Used by volume” appear only if such limits are set, with the number of products lacking weight or dimensions below. The “Blocked, units” tile and a warning appear only if “Blocked” locations hold goods: these are excluded from free stock and exported quantities, and if all free goods are blocked, the status becomes “Out of stock”. Warehouses with bin locations off have no such tile.
    • Bin turnover. How much was shipped from a bin in the period, divided by its current stock. The chart shows the top ten.
    • Dead bins. Goods are stored there, but nothing moved during the period. A good place to start relocating or clearing stock.
    • Best-before dates. Expired goods and those expiring within 30 days.
    The “Reports” tab: the “Blocked, units” tile and a warning about goods in a blocked location
    1Blocked, units
    1. The tile and the warning appear only when locations of type “Blocked” hold goods.

    Scenarios

    A warehouse with 2 racks of 3 shelves

    What to do. In “Create bins”: zone A, rack from 1 to 2, shelf from 1 to 3, bin from 1 to 4, capacity 40. Check the caption below the fields: 24 bins, first address A-01-01-01.

    What you get. The zone, racks, shelves and bins appear. Running it again with a wider range adds only the new addresses.

    Each product has a permanent place

    What to do. In the “Put-away rule” field, choose “Pinned bin only”. On the “Stock by bin” tab, click “Product bin”, scan the product and enter the address.

    What you get. Receipts of this product suggest only the pinned bin. A product without a pin gets no suggestion, and the address is entered manually.

    What to do when something goes wrong

    Common problems
    What you seeWhyWhat to do
    “This location holds goods. Move them first.”, “The location is used in an unposted document.” or “This location is in an open task. Finish or cancel it first.” You can delete only an empty location that isn't in the plans of unposted documents or in open tasks Move the goods, post or fix the document, finish or cancel the task. If you just want nothing new to go there, clear “Active”

    FAQ

    Can I store goods on a shelf or in a zone instead of a bin?

    Yes. Elbuz accepts the address of any active location except carts and consolidation, so a warehouse without small bins can work at shelf level: just don't create the lowest level.

    Does Elbuz track capacity?

    It only warns you with “Capacity exceeded” and doesn't prevent placement. Capacity is counted in product units, totaled across all products in the bin, and also by weight and volume if limits are set.

    Do I need a separate scanner app?

    No. The scanner screen opens in the browser of a phone or handheld terminal via a link or QR code. A scanner works like a keyboard, and in Chrome on Android you can scan with the camera.

    I renamed a rack. What about the labels?

    If the barcode matched the address, it changed along with it, and so did those of nested locations. Reprint their labels: the old ones will no longer find the address.

    Where to find it and who has access

    Menu
    Directories → Base product catalog → Bin locations
    Access right
    the “Bin locations” window in “Group permissions”
    Prepare
    an active warehouse and an address plan: how many zones, racks and shelves

    Related topics

    Was this article helpful?

    Missing a feature? Tell us.

    We will add it for free if other users need it too.

    If only you need it, we will agree on it separately.

    Article contents

    Suggest an improvement

    Try Elbuz free