Elbuz records warranty intake with a “Warranty claim” document: customer and product come from the sale, repair is tracked by statuses, and the customer gets a printed acceptance report.
When you need this:
- A customer brings a broken product — the claim is created from their sale.
- A phone or laptop with an IMEI — one click in “Serial numbers”, with customer and warranty date.
- Repair takes too long — after 14 days the document list highlights the claim.
- The customer needs a document — a PDF report with fault and signatures.
Where to start: the customer's sale in the document list → a claim based on it.
What a warranty claim does
- Three ways to accept — from a sale, manually or by serial number.
- Repair statuses — from acceptance to handover, with an overdue signal.
- Acceptance report — a PDF with the product, fault and signatures.
- Replacement and refund — regular documents based on the claim.
How to accept a product for warranty
A “Warranty claim” is numbered WC-… and doesn't move stock: the product remains the customer's property. The document creates no debt and doesn't need posting — claims are tracked by statuses.
A serial number is optional: you can accept any product.
From a sale
In the “All documents” window, select the sale and click “Create a new document based on the selection” → “Warranty claim”. The customer and lines come over from the sale — delete the lines you don't need. A customer order or sales receipt can also be selected in the “Orders” window.
1
Create a document based on the selected one2
Warranty claim- The toolbar button that creates a new document based on the selected sales invoice.
- The Warranty claim type in the menu: it creates a claim linked to the sale.
The claim gets the “Accepted for warranty” status right away; its warehouses are empty. Serial numbers of the sold devices are carried over from the sale, so the claim shows up in the “Under warranty” filter right away.
Manually
In the documents window, create a “Warranty claim” document and fill in the customer and product as in any document. Such a claim gets the “New” status: choose “Accepted for warranty” in the “Document status” field.
If the product is tracked by serial number, after adding the line click “Serial numbers” in the card and scan the number. Below the field you see when and to whom it was sold and the warranty end date: green — valid, yellow — expired or not set.
By serial number
For a phone or laptop with an IMEI, the fastest way is the “Serial numbers” window: find the number, open its panel and click “Accept for warranty”.
1
Customer2
Warranty until3
Accept for warranty- The customer who bought this unit.
- The date the warranty ends, calculated at sale.
- The button that creates a warranty claim for this number.
The claim is created and opens immediately. The customer and phone come from the sale, the sale document becomes the basis, the line is the product with this number, and the status is “Accepted for warranty”. If the number already has an open claim, the button is replaced by a “Claim WC-…” link, and no second claim is created.
A number whose sale is hidden by the “Data scope” setting can't be accepted.
What to record in the card
In the “Note” field, record the reported fault, accessories and visible condition — all of this goes into the report.
1
Warranty claim title2
At service center3
Document status4
Contact5
Note- The claim title and number.
- The button that moves the claim to the next status.
- The current claim status: Accepted for warranty.
- The customer who handed in the device.
- The note where the fault is described.
How to track the repair with statuses
The button at the top of the card sets the next status, for example “At service center”. You can also pick any status in the “Document status” field.
| Status | What it means |
|---|---|
| Accepted for warranty | The product is with you; repair hasn't started. |
| At service center | The product is being repaired. |
| Ready for pickup | Repair is done; you're waiting for the customer. |
| Issued | The product has been returned to the customer. |
| Replaced, Rejected, Refund | Other outcomes, outside the main sequence. |
Final statuses — “Issued”, “Replaced”, “Rejected”, “Refund” and “Canceled” — close the claim. A claim that stays in “Accepted for warranty” or “At service center” for more than 14 days is highlighted in the document list with an overdue signal.
A regular status trigger notifies the customer of a status change. In the “Serial numbers” window, the “Under warranty” filter collects devices in open claims.
How to print the acceptance report
The “Print” button in the claim card prints the “Warranty service acceptance report”. It contains the claim number and date received, the seller, the customer and a table “Product / Serial number / IMEI / Date of sale / Warranty until”.
Below come the reported fault from the “Note” field, a reminder that warranty repair takes up to 14 days, and the signatures “Received by (seller)” and “Handed over by (customer)”. For a product without a number, the number and date columns are empty.
The seller is taken from your company details. The report template is edited in “Print templates”, like any other.
Replacement, refund and defective goods
Replacement and refund are recorded with regular documents: they aren't created automatically.
| Outcome | What to create |
|---|---|
| Replacement with a new product | Based on the claim — a “Sales receipt” or “Sales invoice” for the new product at price 0. For a device tracked by number — with the new number: it becomes “Out” for the customer, and the warranty is calculated anew. Set the claim to “Replaced”. |
| Old product to the supplier | A “Stock posting” to the defective goods warehouse (the number, if any, becomes “In stock” again). Then a “Return to supplier”. |
| Refund | A “Return from customer” and the “Refund” status. The product goes back to stock only if a destination warehouse is selected (return to stock). |
Scenarios
A customer brought in a kettle bought a month ago
What to do. Find their sale, create a “Warranty claim” based on it, keep the kettle line and record the fault in “Note”. Print the report.
What you get. The customer receives a signed report, and the claim stays in the document list until you set a final status.
The service center couldn't repair a phone, and the customer gets a new one
What to do. Based on the claim, create a sales receipt for the new phone at price 0 with its number, and set the claim to “Replaced”.
What you get. The new number is assigned to the customer with a fresh warranty, and the claim is closed.
What to do when a claim isn't created
| What you see | Why | What to do |
|---|---|---|
| “Number … was not sold by you, so it cannot be accepted for warranty.” | The number doesn't have the “Out” status, isn't in the register, or its sale is hidden by “Data scope” | Check the number in the “Serial numbers” window; without a number — create the claim from the sale or manually |
| The “Create a new document based on the selection” menu has no “Warranty claim” | The “Inventory” workspace offers only warehouse document types | Select the sale in the “All documents” window, or in its card choose “⋯” → “Create a new document based on this” |
| The claim has no next-status button | The claim was created manually and has the “New” status | Choose “Accepted for warranty” in the “Document status” field |
| A “Claim WC-…” link instead of “Accept for warranty” | This number already has an open claim | Open it with the link |
FAQ
Can I accept a product without a serial number for warranty?
Yes. A number is needed only for the button in the “Serial numbers” window; from a sale or manually, a claim accepts any product (from a sale).
Do I need to post a warranty claim?
No. It doesn't move stock or create debt, so it has no “Post” button. Claims are tracked by statuses (statuses).
How do I let the customer know the product is ready?
Set up a trigger on the “Ready for pickup” status with an email to the customer (trigger events).
Can I accept a device sold before serial number tracking was turned on?
Not from the “Serial numbers” window: its number isn't there. Create the claim from the sale or manually.
Can I change the text of the report?
Yes. The report is a regular print template of the “Warranty claim” type, edited in “Print templates”.
Where it is and who has access
- Menu
- Directories → Documents → Orders or All documents
- Other entry points
- “Serial numbers” → panel of a sold number → “Accept for warranty”
- Access right
- the right to edit documents; for the button in “Serial numbers” — also access to that window
- Prepare
- name and contacts in your company details — they go into the report
Related topics
- If you need to track devices one by one by IMEI — serial number tracking.
- If the customer returns a product for a refund — return to stock.
- If you need to set up statuses and print templates — document dictionaries.
