Elbuz links each incoming email to a customer's card by sender address and adds first-time customers to the directory itself. Newsletters, notifications and SEO agency pitches don't become contacts.
When you need this:
- A customer writes from several addresses — up to three per card, all emails in one conversation.
- A new buyer wrote in — AI creates a card with the source “Email (AI)”.
- Agencies and services write daily — robot emails are dropped without AI; “Not a customer” ignores the domain.
- Unwanted records in the directory — the “Source - Code” filter finds those created by mail.
Where to start: check the “Create a contact from email” mode.
What email linking does
- Linking by address — the email goes into the conversation of the record whose address matches one of its three email fields.
- Three modes for new addresses — don't create, create after an AI check, or always create.
- Robot email filter — newsletters, auto-replies and notifications are filtered out before AI.
- Website form requests — the customer from the “Reply-To” field becomes the sender.
- AI analysis of new emails — decides who's writing and adds labels.
- Buttons under the email and the ignore list — correct the AI's decision.
- Cleanup — find and delete records created by mail.
How an email attaches to a customer
When an email loads, the app looks in the contact directory for a record with the same sender address. It checks all three email fields of the record — “Email”, “Email #2” and “Email #3”. If it finds one, the email is linked to that record and shows up in its conversation.
The app looks for any directory record, not just a “customer”: customers, suppliers and competitors are all a .
What you should know:
- An exact address match, not a similar one. Letter case and stray spaces don't matter, but “ivan+shop@gmail.com” and “ivan@gmail.com” are different addresses to the app — as is any other address of the same customer that isn't in their card.
- Only the sender is checked. If a customer wrote from another address and put their main one in CC, the email won't attach to them.
- Records in the trash are ignored when an email arrives. An email from an address whose contact is in the trash lands without a contact.
Email from a new address: will the sender become a contact
What happens to an email from an address that isn't in the directory is decided by the “Create a contact from email” setting in Account → System settings, section “Contacts and CRM”. You choose one of three modes:
| Mode | What happens to an email from a new address | Who it suits |
|---|---|---|
| “Do not create” | the email lands in mail without a contact; mail never creates new records | those who keep the directory only by hand or from orders |
| “After check (recommended)” — the default | robot emails are filtered out right away, AI assesses the rest; only a sender AI confidently recognized as a customer, supplier or partner becomes a contact | most shops: customers are added automatically, spam and service pitches aren't |
| “Always” | every new sender immediately becomes a customer contact, except robot emails and addresses on the ignore list | those who want everyone who wrote in the directory and are ready to clean it up |
1
Ignore email addresses2
Contact creation mode3
AI analysis of new emails- Ignore email addresses — the listed addresses are skipped when searching for and creating contacts.
- Create a contact from email — choose Do not create, After check (recommended) or Always.
- AI analysis of new emails — the switch that turns automatic analysis of incoming emails on or off.
Why it changed. This used to be a simple switch, off by default. When on, it created a contact from every email — a supplier newsletter, a bank notification, a “Delivery Status Notification”, an SEO agency email.
Within a week the customer directory grew by hundreds of records that don't and never will buy, while real customers writing for the first time had to be added by hand. Now two filters stand between an email and the directory, so the smart mode is on for everyone from the start.
The old switch position doesn't carry over to the new choice: after the update, mail works in “After check” mode until you pick another one. To get the old behavior back, choose “Do not create” (like the switch off) or “Always” (like the switch on, but now without robot emails).
- Start or end
- Action or result
- Decision: the path depends on the answer
Which emails the app filters out without AI
Before any AI, the app discards emails that weren't written by a person. An email counts as a robot email if:
- the sender address is a system one:
noreply,no-reply,do-not-reply,mailer-daemon,postmaster,bounce,notifications,notify,alerts,newsletter,mailer(and variants likenoreply+shop@…); - the email's technical headers say it's an auto-reply, a bulk mailing or a mailing list (that's how newsletters with an “unsubscribe” link, “I'm on vacation” auto-responders and service notifications mark themselves);
- it's a non-delivery report (“Delivery Status Notification”, “Undelivered Mail”);
- the email is in the “Spam”, “Trash”, “Sent” or “Drafts” folder;
- the email came from the domain of your own mailbox or an employee's — a colleague isn't a customer. Public mail services (gmail.com, ukr.net, i.ua, outlook.com and others) don't count as your domain: customers write from gmail too.
Such an email stays in mail as a regular one, but it doesn't create a contact in any mode and doesn't go to AI analysis.
Website form requests are an exception. A contact form or callback request form on a website sends an email on behalf of the site: from no-reply@… or from an address on your own domain. The site puts the address the customer entered in the form into the “Reply-To” field.
If the “From” address is a system one or on your domain, and “Reply-To” holds a different, ordinary address — not a system one and not on your domain — the app treats the customer from “Reply-To” as the sender. Such an email:
- goes to “Inbox” as an email from a person and goes through AI analysis;
- finds or creates a contact by the customer's address;
- becomes a ticket;
- is addressed to the customer, not the site, when you click “Reply”.
The “From” field in the email row still shows the site's address — that's how the email arrived.
Limits of the exception. A form that doesn't fill in “Reply-To” and only puts the customer's address in the body produces a robot email: no AI analysis, no contact and no ticket (from no-reply@… it goes to “Automated”; from an address on your domain it stays in “Inbox” as a colleague's email).
For an email from a real person, for example from gmail, “Reply-To” doesn't replace the sender, even if it's filled in: otherwise anyone could sign with someone else's address and get that person's orders in an AI answer.
So the address your site sends forms from must be either a system one (no-reply, notifications and so on) or on the domain of your mailbox or an employee's mail. The app will take a third-party form service with an ordinary address for a person, and the service itself will become the sender.
How AI decides who's writing
The “AI analysis of new emails” setting in the same section turns on a background task: every 5 minutes it takes up to 20 emails from people that have both loaded and been written within the last two days, and analyzes each one once.
- When you first connect a mailbox with history, old correspondence isn't analyzed and doesn't create contacts.
- Senders on the “Ignore email addresses” list are skipped.
- The analysis gives the same result as “AI answer from knowledge base”: an intent label, priority, tone and, for “After check” mode, the answer to “who's writing”.
AI assigns the sender to one of these types: customer, supplier, partner, cold service pitch, service notification, spam, personal, unknown — and says how confident it is. How the labels look in the email list and how to filter by them is covered in “Mail day to day”.
Only “customer, supplier or partner” with confidence of 0.7 or higher creates a contact. The app first looks for a record with this address in the three email fields (trash excluded) and creates a new one only if none is found: name and contact person from the sender's name, the address in “Email”, “Source - name” — “Email (AI)”.
A customer goes into the customer group, a supplier and a partner into their own groups. Right after that, all already loaded emails from the same address that had no contact yet are linked to the record.
The analysis is on by default. Without it, “After check” mode creates no one by itself — only when a manager clicks “AI answer” on a specific email or adds the sender with the button.
If an analysis fails (for example, the balance ran out or the AI service failed), it doesn't restart by itself: the email stays without labels and without a contact until a manager clicks “AI answer from knowledge base” or “Create contact”.
Mail is fetched when someone opens a folder or clicks refresh (when new emails arrive). So new emails aren't analyzed the moment they reach the server, but within 5 minutes after they load into Elbuz.
How to correct AI: buttons under the email and the ignore list
AI isn't always confident, and it makes mistakes too. Under the header of an incoming email there are two buttons:
- “Create contact” — adds the sender as a customer (or finds an existing record with this address) and links all their emails to it.
- “Not a customer” — puts the address or corporate domain on the ignore list; a contact created by mail that has no documents goes to the trash.
When each button is visible and what changes after you click it is covered in “Mail day to day”.
The “Ignore email addresses” field also accepts a whole domain: @topseo-agency.com stops contacts from being created from any address on it. Domains work only for mail; order import matches the list against full addresses, so an @domain entry filters nothing there. The list has its own switch: when off, the list doesn't apply in mail; order import ignores the switch.
What to do with contacts created by mail
A record created from an email gets its name and contact person from the sender's name, and the sender's address in “Email”. “Source - Code” shows who created it: email_ai — AI analysis in “After check” mode, email — “Always” mode or the “Create contact” button.
“Source - name” is “Email (AI)” when AI created the record and “Email” when the button did; in “Always” mode the name is empty. These codes are how you find the records: in the contact list, filter the “Source - Code” column, check the records you need in the “Selection” column and click “Delete”.
For one or two records, the “Not a customer” button in that sender's email is faster: it moves the record to the trash if it has no documents, and adds the address or domain to the ignore list so the record isn't created again.
What happens next:
- First the records go to the trash. They stay there for 60 days and are then erased automatically; until then you can “Restore” them or “Delete permanently”.
- While a record is in the trash, new emails don't attach to it. An email from this address lands without a contact, and then the “Create a contact from email” mode and the buttons under the email header decide. Emails linked earlier stay with the record if you moved it to the trash by hand; “Not a customer” unlinks them.
- After permanent deletion, emails don't disappear from mail. Deletion doesn't touch the emails but removes their link to the contact: the emails stay in mail without a contact. The recipient is also removed from newsletters.
- After permanent deletion, the next email from the same address can create a contact again — in “After check” and “Always” modes. To prevent this, add the address or domain to “Ignore email addresses” (that's what “Not a customer” does) or switch the mode to “Do not create” — changing the mode doesn't remove records already created.
Scenarios
A customer writes for the first time: “Where's my parcel?”
Task. A buyer placed an order on the website with one email address but writes from another: “Order 4618, when will it be at the pickup point?” The manager wants to see her email in the customer card and reply with her orders in mind.
What to turn on. Nothing: “Create a contact from email” is set to “After check (recommended)” and “AI analysis of new emails” is on by default.
What you get. Within 5 minutes after the email loads, AI identifies a “customer” and creates a card with the source “Email (AI)”; in the list the email gets the “Order status” label. When the manager opens the email, they see the contact card under it, and “AI answer from knowledge base” pulls in this card's orders.
If order 4618 is on a different card (with the old address), add the new address to “Email #2” on that card and merge the extra new card into it — otherwise emails and orders will live separately.
An SEO agency offers a “partnership”
Task. Every day you get offers of promotion, advertising, “mutually beneficial cooperation”. They shouldn't become customers in the directory or end up in newsletters.
What happens without you. AI recognizes the email as a cold pitch, no contact is created, and the email gets the “Other” label in the list. A service newsletter with an “unsubscribe” link or an email from a noreply@ address doesn't go to AI at all — the robot filter drops it.
What to do if the agency keeps writing. Open the email and click “Not a customer”: the agency's domain goes to “Ignore email addresses”, and no email from it will create a contact again, even in “Always” mode.
AI created a contact by mistake
Task. A “customer” appeared in the directory who is actually a delivery service manager or an advertising agent.
What to do. Open any of their emails and click “Not a customer”. If the record has no documents, it goes to the trash, the address (or corporate domain) to the ignore list, and the emails are unlinked. If it has documents, the record stays — remove it by hand once you've sorted out the documents.
A doubtful sender: AI didn't create a contact, but it's a customer
Task. A wholesale buyer wrote briefly: “Send me your price list”, with no signature. AI isn't sure and doesn't create a contact.
What to do. Click “Create contact” in the email: the app adds a customer with the sender's address (or finds the existing record) and links all their emails. A supplier? Change the group in the card. If the address or its domain is on the ignore list, the button creates nothing and shows “Failed: …”; remove the list entry first.
See a customer's emails in their record without creating new records
What to turn on. Connect a mailbox with the wizard. In the customer's record, enter all the addresses they write from: “Email”, “Email #2”, “Email #3”. In “Create a contact from email”, choose “Do not create”; you can keep “AI analysis of new emails” for the labels or turn it off.
What you get. An email whose sender address matches any of the three fields is linked to that record. If two contacts have the address, the active one wins. An email from an unknown address lands in mail without a contact, and no new record is created for it.
What won't happen. An address in CC doesn't count: if a customer wrote from someone else's mailbox and put their own in CC, the email stays without a contact. Only the sender is compared.
Add everyone who wrote to the directory
What to turn on. “Create a contact from email” → “Always”.
What you get. Every email from an address that isn't in any of the three email fields creates a customer record right when it loads: name and contact person from the sender's name, the address in “Email”, source code email. Later emails from this address attach to that record. AI analysis isn't needed for this.
What won't happen. Robot emails (noreply, newsletters, auto-replies, non-delivery reports, spam, your own domain) and addresses from the “Ignore email addresses” field don't create records. Cold pitches from real people do: nobody checks them in this mode. How to clean up afterwards is covered in the section on contacts created by mail.
What to do when an email has no customer or the directory has unwanted records
| What you see | Why | What to do |
|---|---|---|
| An email from a known customer has no contact | the sender address doesn't match any of the three email fields in the card — and it's compared as a whole string, without resolving aliases | add this address to the customer card, in the “Email #2” or “#3” field (how an email attaches to a customer) |
| A new customer wrote, but no contact was created from their email | “Do not create” mode, “AI analysis of new emails” is off, AI isn't confident, the address is on the ignore list, the email was recognized as a robot email, or it was written more than two days ago | click “Create contact” under the email header (email from a new address) |
| “Failed: the address is on the ignore list, the email is not incoming, or you have no access to contacts.” after “Create contact” | the sender address or its domain is in “Ignore email addresses”; less often, the sender address is misspelled and doesn't look like an email address | remove the entry from the list in the “Contacts and CRM” section and click the button again (buttons under the email header) |
| “Customers” from newsletters and service pitches appeared in the directory | “Always” mode is set — in it, nobody checks senders who are real people | switch to “After check”, remove the unwanted ones with the “Not a customer” button or with a filter on “Source - Code” (contacts created by mail) |
FAQ
What happens if one email address is entered for two contacts?
An incoming email attaches to only one of them: the active record wins, and if both are equal, it's whichever comes up. Records in the trash aren't part of the search.
Why wasn't a contact created from a new customer's email?
Five reasons: “Do not create” mode; “AI analysis of new emails” is off; AI isn't sure it's a customer; the address is ignored; it's a robot email. Background analysis skips emails older than two days. Except for the ignore list, “Create contact” helps (troubleshooting).
Can the system mark important emails and complaints by itself so a manager sees them first?
Yes, “AI analysis of new emails” does this: an intent label, “Important” or “Urgent”, a “Negative tone” icon. How to filter by them is in “Mail day to day”; managers set flags and tags themselves (email markers).
Will mail create a contact from a newsletter or an auto-reply?
Not by itself — in no mode, not even “Always”: the robot filter drops such emails. Manually — with the “Create contact” button. “AI answer from knowledge base” assesses a newsletter or auto-reply by its content, and there the decision is up to AI.
We connected a mailbox with history — why weren't customers created from old emails?
Background AI analysis takes only emails written within the last two days. Add the sender of the customer you need with the “Create contact” button in their email (buttons under the email).
Where it is and who has access
- Menu
- Account → System settings → “Contacts and CRM”
- Other entry points
- buttons under the header of an incoming email in the “Mail” window
- Access right
- the buttons under an email are visible to those with access to the “Contacts” window
- Prepare
- a connected mailbox; customers' addresses in their cards
Related topics
- If you need the big picture of mail — Mail in Elbuz.
- If you want to see AI labels and the buttons under an email in daily work — Mail day to day.
- If a record created by mail needs completing or merging with an existing one — contact card.
- If a customer's email needs a response deadline and an assignee — customer tickets.
- If emails from services and robots need sorting into folders — mail sorting.
