A posted order reserves stock, and Elbuz, an order management software, shows free stock: on hand minus what's promised to other customers. A sales invoice created from the order deducts the stock.
When you need this:
- Several customers want one product: a posted order reserves it, free stock drops.
- More was ordered than you have: the card shows the banner “Items not covered by free stock: N”.
- In stock, but Elbuz shows a shortage: the “Done” status releases the reservation, “Paid” doesn't.
- You ship in parts: the “Shipment progress” bar shows how much has gone out.
Where to start: turn on the “Own warehouse” scheme and post the order.
What posting and reservation do
- Posting locks in the exchange rate and your company's turnover and makes the card read-only; you can undo it with one click.
- Reservation: a posted order holds stock at the reservation warehouse.
- Stale reserves: a tile collects old orders that still hold stock.
- Free stock and the shortage banner: you see whether there's enough stock before you ship.
- Shipping with a sales invoice: it copies the order lines and deducts stock from the warehouse.
- Shipment progress: when you ship in parts, it shows “shipped / ordered”.
Posting: what it does and what it locks
Posting records a document in your books. For a customer order, it does exactly four things:
- locks in the currency exchange rate on the document date, if it isn't set yet;
- adds the order amount to the turnover of your company, the one in the “Sender company” field;
- marks the document as posted, records who did it and when, and writes an event to the history;
- recalculates the reservation for the order's products.
What posting an order does not do: it doesn't change stock on hand. Not by a single unit, whatever the status. The order only holds stock as a reservation; another document deducts it.
The legend of the documents window (the “?” button) puts it this way: posting warehouse document types moves stock, while orders reserve it. A customer order doesn't move stock: it only reserves products (and only when inventory tracking is turned on).
What changes for you after posting:
- the card becomes read-only, the banner “The document is posted - editing is locked. Unpost it in the documents list to make changes.” appears, and the “Post” and “Add product” buttons disappear;
- you can't delete it, either on its own or in bulk: Elbuz replies “Deletion is not possible: cancel the document posting first.”, and from a batch of selected rows it simply leaves posted ones out (see deletion and the trash);
- the document can't be merged with others: “A posted document cannot be merged - unpost it first”;
- edits in the list grid don't go through either: the cell reverts to its old value, and Elbuz shows the red message “The document is posted - editing is locked. Unpost it in the documents list to make changes.”;
- the lines are no longer recalculated.
To unpost, use the same icon on the row: an unposted document shows an empty circle (tooltip “Post document”), a posted one a green handshake (tooltip “Unpost”). Everything rolls back: turnover drops by the document amount, the posted flag clears, the history gets an unposting event, the reservation is recalculated. Posting an order is reversible; don't fear it.
Both posting buttons work immediately, with no confirmation: “Post” in the card (it also closes the window) and the posting icon on a list row. Neither asks “Are you sure?”.
Reservation and free stock
A reservation is the quantity held by posted orders. Nothing physically leaves the warehouse, but that quantity is no longer free stock.
For reservations to be counted at all, three conditions must hold at once:
- inventory tracking is on: the “Own warehouse” or “Supplier / wholesale” working scheme;
- at least one active warehouse: without one, there's nowhere to reserve, and the calculation doesn't run;
- the order is posted and has a status that doesn't release the reservation.
The last one surprises people most. An unposted order holds nothing. However many orders with this product sit in “New”, they won't reduce free stock.
The reservation goes to the warehouse in the “Reservation warehouse” field of the “Additional” section. If no warehouse is selected, the default warehouse is used, and the form says so under the field: “No warehouse selected - stock for this document is reserved at “‹name›” (the default warehouse).”
It's “Reservation warehouse”, not “source warehouse”: an order ships nothing, it only reserves. It's a physical warehouse from the “Warehouses” directory, not a store's warehouse from “Shops”: that one lists storefront products and doesn't affect reservations.
Two formulas worth keeping in mind:
- free at a warehouse = on hand at the warehouse − reserved at that warehouse;
- free for a product = product on hand − reserved across all warehouses.
Shortages use the second number. If it's negative for any order line, the card shows the banner “Items not covered by free stock: N” with the explanation “Free stock (on hand minus other orders' reservations) is negative — a shortage is possible at shipping.” It's a warning, not a block: Elbuz still lets you post such an order.
Thirteen document statuses release the reservation: “Done”, “Completed”, “Issued”, “Delivered”, “Canceled”, “Rejected”, “Canceled return”, “Voided”, “Failed”, “Overdue”, “Not relevant”, “Returned”, “Product return”. When shipping in parts is turned on, a posted sales invoice based on the order also reduces the reservation by the shipped quantity (shipment).
Any other status counts as “order still open”, and the stock stays held. The rule is deliberately cautious: an unknown status won't release the reservation, so you don't sell what's promised to someone. Careful: two adjacent statuses both read “Overdue” in English. Прострочено releases the reservation, Прострочений doesn't.
“Paid” and “Shipped” don't release the reservation: they aren't on the list. Payment isn't handover, and a shipped parcel can come back. Orders left in “Paid” hold their stock forever: free stock shrinks, and the shortage banner appears on lines you physically have enough of. The “Stale reserves” tile helps you find such orders.
To free up stock, move a closed order to a status from the list above (most often “Done”, the last stage of the pipeline) or unpost it.
The reservation is recalculated:
- when the order's status changes, and when the order is posted or unposted;
- when a sales invoice created from the order is posted or unposted, if shipping in parts is turned on;
- for all products, when inventory tracking is turned on or off in the settings;
- for all products nightly, fixing any missed recalculation.
A posted marketplace or website order takes the marketplace status if it was canceled, returned, handed over or delivered there; the next order import releases the reservation (which side overwrites which).
POS receipts reserve nothing: the goods are handed over at the moment of sale. This applies to receipts from the Dotykačka POS.
Reservations need both inventory tracking and posted orders. Without inventory tracking, a posted order reserves nothing. That's not a fault: dropshipping doesn't need your own stock.
How to find orders that still hold stock
In the “Orders” window, there's a “Stale reserves” tile above the list. Its number counts posted orders older than 30 days that still hold stock: their status doesn't release it, and not everything has shipped. Click the tile to show only these orders; click again to clear the filter. The tile appears only when inventory tracking is on.
1
Stale reserves tile2
Filtered orders- Stale reserves tile — active, shows how many orders hold a reserve for too long.
- Filtered orders — the list is narrowed to the two orders with stale reserves.
Move orders that are already closed to a status that releases the reservation, most often “Done”, and the stock is freed. The same “Stale reserves” link sits in the settings next to the free stock for the website toggle.
How an order turns into a shipment
Elbuz has no “Ship” button. A shipment is a separate document created from the order.
1
Create a new document based on this2
Sales invoice- Create a new document based on this — hover it to open the list of document types.
- Sales invoice — one of the document types you can create from the order.
- In the order card: “…” → “Create a new document based on this” → “Sales invoice” (the three-dot button on the right of the header). In the list, the “Create a new document based on the selection” button and the “Copy to” item in the selected-rows bar do the same.
- Elbuz copies the header and all lines, assigns a new number, leaves the invoice unposted and records the link between the documents. You'll see this link in the “Document chain” section of both cards: “What this document was created from and what was created from it. Click a row to open the document.”
- Check and post the invoice. Its document type behaves differently: it deducts stock from the warehouse and, since it fulfills the order, adds the shipped quantities to the lines of the source order.
- In the order's “Products” section, the “Shipment progress” bar appears with “shipped / ordered” figures and a percentage, and each line gets its own “X / Y” with the tooltip “Shipped”.
Unposting the invoice rolls back both the stock deduction and the order's shipment progress. One invoice can have several source documents, and progress is added to each of them.
Don't look for the invoice itself here later: a sales invoice belongs to the “Inventory” workspace. It isn't in the “Orders” list, but you'll find it in “All documents” and in the order's own “Document chain” section.
Shipment progress is visible only when partial shipments are turned on (the “Supplier / wholesale” scheme) and only once more than zero has shipped. Without this scheme, the invoice still deducts stock from the warehouse; the order just won't show how much of it has already gone out.
Scenarios
Own warehouse: don't sell what's already promised to another customer
What to turn on. In the “Working scheme” wizard, choose “Own warehouse”. The “Warehouses” directory must have at least one active warehouse. Post the order you need to hold stock for.
What you get. The posted order reserves stock at the warehouse in the “Reservation warehouse” field or at the default warehouse. An order card with this product shows the banner “Items not covered by free stock: N” if the product's free stock (on hand minus reserved) has gone negative.
What you won't get. An unposted order reserves nothing. Here a posted sales invoice deducts stock but doesn't reduce the order's reservation: order lines don't count shipped quantities until shipping in parts is on. The reservation is released by a status from the release list, most often “Done”. The “Paid” status doesn't release it.
Wholesale: shipping and payment in parts
What to turn on. In the “Working scheme” wizard, choose “Supplier / wholesale”. It turns on inventory tracking, shipping in parts and payment in parts all at once. Ship with sales invoices created from the order card: “…” → “Create a new document based on this” → “Sales invoice”.
What you get. The “Payment” section gets a “Paid” field with “Payment progress”. When the paid amount reaches the document amount, the payment date is filled in automatically, and if you reduce the paid amount later, it's cleared.
Each posted invoice adds shipped quantities to the order lines, and the “Products” section shows “Shipment progress”. The reservation counts only what hasn't shipped yet: posting an invoice reduces the order's reservation right away, and unposting it brings the reservation back.
What you won't get. An invoice not created from the order doesn't move its shipment progress.
What to do when something goes wrong
| What you see | Why | What to do |
|---|---|---|
| “The document is posted - editing is locked. Unpost it in the documents list to make changes.” | A posted card opens read-only | Unpost it in the list, fix it, post it again (posting) |
| “Items not covered by free stock: N” | The product's free stock is negative: demand exceeded what's on hand, or reservations of closed orders ate it up | Order from a supplier, reduce the quantity, or free the reservation by closing stale orders (reservation) |
| The product is in the warehouse, but the order shows “Items not covered by free stock: N” | Closed orders are in the “Paid” or “Shipped” status: these don't release the reservation, so the stock stays held | Find them with the “Stale reserves” tile and move them to a status from the release list, most often “Done” (stale reserves) |
FAQ
Why isn't the product reserved even though the order is posted?
A reservation needs three conditions together: inventory tracking on, at least one active warehouse, and a posted order in a status that doesn't release the reservation. Inventory tracking is off by default; the “Working scheme” turns it on (working schemes).
The order is paid and closed, but the product is still reserved. Why?
The “Paid” status doesn't release the reservation: payment isn't handover. Move the order to “Done”, the last stage of the pipeline, or unpost it, and the stock is freed. The “Stale reserves” tile shows all such orders (statuses that release the reservation).
Can I unpost an order?
Yes: use the “Unpost” icon on the list row. Your company's turnover goes down, the reservation is recalculated, and the card becomes editable again.
Which warehouse gets the reservation?
The warehouse in the “Reservation warehouse” field of the order card's “Additional” section. If the field is empty, the default warehouse is used, and the form shows its name under the field.
How do I ship an order in parts?
Turn on the “Supplier / wholesale” scheme and create a sales invoice from the order for each part. Each posted invoice adds the shipped quantity to the order lines, and the reservation goes down by that amount.
Where to find it and who has access
- Menu
- Directories → Documents → Orders → order card → “Post”
- Other entry points
- the posting icon on a list row, the “Post document” item in the row menu
- Access right
- posting and unposting are a separate permission block of the “Orders” window
- Prepare
- the “Own warehouse” or “Supplier / wholesale” scheme, at least one active warehouse
Related topics
- If you need the big picture: processing customer orders.
- If you need to take an order to “Done”: order stages.
- If the goods have shipped and you need to send a parcel: carrier waybill.
- If you need to set up a warehouse, receipts or a stock count: inventory management.
- If you're deciding whether to manage stock in Elbuz: what it gives your store.
