↑↓ selectEnter openEsc close

    1. Elbuz

    How to negotiate with suppliers: statuses, notes and letters

    5 min readUpdated

    Elbuz keeps a list of suppliers you negotiate with: status, terms and notes, right in the catalog. You also email suppliers from there: AI drafts the letter, replies go to your inbox.

    When you need this:

    • Writing to several suppliers: statuses show who hasn't replied and who is connected.
    • Comparing terms: minimum order, dropshipping, payment terms and price list method in side-by-side columns.
    • Not sure what to write: “Write with AI” drafts a letter asking for terms and a permanent price list link.
    • No supplier email: paste the text into a form or messenger on their site.

    Where to start: “Supplier catalog” → supplier card → the “My notes” block.

    What “My suppliers” can do

    • Statuses: “Interesting”, “Awaiting reply”, “Connected”, “Not a fit”; Elbuz sets some of them for you.
    • Terms and notes: what the supplier told you, stored in the card, with no “Save” button.
    • Comparison: all marked suppliers with their terms in columns.
    • Letter to the supplier: an AI draft, sent on your behalf, with the reply going to your email.
    • Supplier without email: text for the contact form or messenger on their website.
    • The AI consultant knows your list and suggests whom to write to and what to do next.

    How to mark suppliers with statuses

    The status shows what stage you are at with a supplier. In the card it is the first line of the “My notes” block; in the list it is the first column, “Status”. You can change it at any time with one click. You can't clear a status, only set a different one.

    StatusWho sets itWhat it means
    no status—the card hasn't been opened yet
    “Viewed”Elbuz, when you click the supplier in the listyou have seen them but haven't decided yet
    “Interesting”youworth writing to, or you are already negotiating
    “Awaiting reply”Elbuz, after “Send” in the card or after an email from Elbuz mail to a contact added from the catalog; or youthe letter is sent, no reply yet
    “Connected”Elbuz, after “Add as contact”; or youthe supplier is in your database and you work with their price list
    “Not a fit”youyou turned them down; they also appear in “All marked” so you don't write to them twice

    A sent letter doesn't change “Connected” or “Not a fit”; any other status becomes “Awaiting reply”. Setting “Connected” by hand doesn't create a contact: only the “Add as contact” button does that (what it does).

    How to record terms and agreements

    Below the status, the “My notes” block has fields for what the supplier told you. Everything saves automatically as soon as you leave a field or pick a value from a list: “Saved” briefly appears on the right of the block header. There is no “Save” button.

    The My notes block of a supplier card with status, terms and a note
    1Status
    2Min. order
    3Note
    1. Status — mark where you are with this supplier; here “Awaiting reply”.
    2. Min. order — the minimum order amount the supplier named.
    3. Note — free text: terms, manager, agreements.
    FieldWhat to enter
    “Min. order”free text up to 120 characters: “from UAH 3,000”, “from 10 pcs”, “no minimum”
    “Dropshipping”“Yes”, “No”, or “—” if not known yet
    “Payment terms”free text up to 120 characters: “14 days”, “after the goods are sold”
    “Price list via”“File”, “Permanent link” or “API”
    “Note”everything else: the manager, agreements, what they promised to send; up to 4,000 characters

    AI uses the note too: when drafting a letter, it takes up to the first 600 characters of it, so record anything agreed on a phone call before you write.

    How to compare suppliers by terms

    Click “All marked” on the left, or one of the statuses below it. The list shows only your suppliers, and instead of the “Type”, “Section” and “Country” columns you see the terms from your notes: “Min. order”, “Dropshipping”, “Payment terms”, “Price list via”. A note icon next to the status means the supplier has a note.

    The “My suppliers” panel with “All marked” selected and the list with terms columns
    1All marked
    2Status column
    3Min. order column
    1. All marked — every supplier you have marked.
    2. Status column — where the talks stand.
    3. Min. order column — the minimum order from your notes.
    • “All marked” includes every supplier with one of the four statuses below it: “Interesting”, “Awaiting reply”, “Connected”, “Not a fit”. Suppliers whose card you only opened (“Viewed”) aren't here. Each item has a counter that updates as soon as you change a status.
    • The suppliers you worked with most recently are at the top. Click the “Status” or “Supplier” header to sort differently.
    • The “All types” and “All countries” filters apply here too. If the list shows fewer suppliers than the counter, check these filters.
    • To go back to the catalog, click any section or “Reset filters”.

    How to write to a supplier from the card

    The “Write to supplier” button in the card header opens the letter form right in the card, above “My notes”. The first time, while the text is empty, AI starts drafting straight away; a message below the buttons shows it is working.

    FieldWhat's in it
    “To”the supplier's name and email from the catalog; you can't change the address
    “Your name”, “Your email”required; taken from your profile, and the browser remembers them after the first send
    “Your store or website (optional)”if you don't have a store yet, leave it empty: AI won't make one up
    “Subject”, “Letter text”required; AI fills them in, you edit them

    What the AI letter asks

    The draft is a short letter of 60–110 words in your interface language, from someone choosing suppliers to sell online. What exactly it asks depends on the supplier's types in the catalog:

    • both dropshipping and wholesale (or manufacturer, importer): terms for both formats;
    • dropshipping only: dropshipping terms;
    • wholesale, manufacturer or importer only: wholesale terms;
    • type unknown or “Reseller” only: which formats the supplier works in and on what terms.

    The letter then always asks about the minimum order, payment terms, delivery and, most importantly, a permanent link to a price list with stock levels (XML, YML, CSV or XLSX) or API access, so that prices and availability update automatically.

    The signature is your name from the form. AI shouldn't invent contacts or a store name missing from the form, but read the text before sending anyway. When the text is ready, Elbuz shows “The text is ready — check it and send.”.

    The “Write with AI” button is only visible while the “Letter text” field is empty: finished text is edited by hand. Want a new draft? Clear the text and the button comes back.

    Per 24 hours: no more than three drafts per supplier and twenty AI letter requests for the whole account; a failed attempt that AI retries also counts. Each request is charged to your balance for actual AI usage (tokens), like other AI features. Once the limit is reached you can still write the text yourself and send it.

    What happens after “Send”

    First, Elbuz checks the fields. An empty required field is highlighted with the hint “Fill in this field”, an invalid address with “Enter a valid email”; the letter won't go until they are fixed.

    Then the letter goes on your behalf to the supplier's email from the catalog. The supplier's reply goes to the address in the “Your email” field, that is, to your mailbox, not to Elbuz. Below the buttons you see “Letter sent. The reply will come to your email.”, and the supplier's status becomes “Awaiting reply”.

    • One letter per supplier per 24 hours. A second attempt within 24 hours returns “You already wrote to this supplier in the last 24 hours. Next letter — tomorrow.”.
    • Up to 30 letters to suppliers per account per 24 hours. After that: “Many letters to suppliers have been sent today. Continue tomorrow.”.
    • The card doesn't show the text of a sent letter. If you'll need it, copy the key points into “Note” before sending.
    • A letter doesn't create a contact: the supplier appears in your “Contacts” only after “Add as contact”.

    Supplier without email

    If the catalog doesn't know the supplier's email, the form shows a warning instead of “To” and a “Copy text” button instead of “Send”. The draft is prepared as usual; the button copies the subject and text for the contact form or messenger on the supplier's website. The website and messengers are in the card's “Contacts” block.

    Letter form for a supplier with no email in the catalog, with a notice to copy the text and send it manually
    1Letter to the supplier
    2No-email notice
    1. Letter to the supplier — the form opens in the supplier card.
    2. The catalog has no email for this supplier, so the text is prepared for copying and sending via the supplier's site or messenger.

    In this case Elbuz doesn't change the status, because you send the letter yourself. Set “Awaiting reply” by hand so the supplier doesn't get lost.

    What to ask the AI consultant

    The “AI consultant” window sees your suppliers with the statuses “Interesting”, “Awaiting reply”, “Connected” and “Not a fit”: up to the eight most recent per status, with terms and the first 120 characters of the note. It doesn't see viewed ones. Copy a phrase and paste it into the consultant chat:

    What to typeWhat happens
    “Which of my interesting suppliers haven't I written to yet?”lists suppliers with the “Interesting” status and reminds you about the “Write to supplier” button
    “Which suppliers haven't replied yet?”lists those with the “Awaiting reply” status
    “Compare the terms of the suppliers I marked”summarizes the minimum order, dropshipping, payment terms and how you get the price list from your notes
    “What's next with BRAIN?”for a connected supplier, the next step: price list, markups, product content, export, orders

    Replace BRAIN with your supplier's name. More ready-made phrases are in AI consultant: what to ask.

    Scenarios

    Choosing one of five dropshippers

    In the catalog, mark five suppliers as “Interesting” and send each a letter from the card: their statuses become “Awaiting reply”. Replies arrive in your mailbox: record the terms in the “My notes” fields. Open “All marked” and compare the columns. Use “Add as contact” for the best one and mark the rest “Not a fit”.

    Supplier without email

    Open “Write to supplier”, wait for the draft, click “Copy text” and paste it into the form on the supplier's website. Set the “Awaiting reply” status by hand, and note where exactly you wrote.

    A colleague takes over the negotiations

    Statuses and notes are shared across the account. A colleague opens “Awaiting reply”, sees your notes on each supplier and picks up where you left off; replies to your letters, however, still go to your mailbox.

    What to do when something goes wrong

    Common problems with letters to suppliers
    What you seeWhyWhat to do
    “You already wrote to this supplier in the last 24 hours. Next letter — tomorrow.” One letter per supplier per 24 hours Send it tomorrow or write from your own mailbox (about the limits)
    “Many letters to suppliers have been sent today. Continue tomorrow.” The account has sent 30 letters to suppliers in 24 hours Continue the next day
    “You have already drafted several letters to this supplier today…” Three AI drafts for one supplier in 24 hours Edit the existing text by hand (about the draft)
    “Many AI letters have been drafted today. Edit the text by hand or try tomorrow.” The account has already made twenty AI letter requests in 24 hours Write the text yourself: you can still send it
    “Could not prepare the letter” AI didn't return a draft Click “Write with AI” again or write the text yourself
    “Could not send the letter. Please try again.” The letter couldn't be queued for sending Try again in a few minutes; the status hasn't changed and no limit was used
    “Copy text” instead of “Send” The catalog doesn't know the supplier's email Send the text via the supplier's website (how)

    FAQ

    Why did the “Write with AI” button disappear?

    The “Letter text” field already contains text. The button is only visible while the field is empty; clear the text and it comes back (more).

    Where does the supplier's reply go?

    To the email in the “Your email” field of the letter form, that is, your regular mailbox. The reply doesn't reach Elbuz; change the status by hand once the supplier has replied.

    What exactly does the letter ask the supplier?

    Their terms for their format (wholesale, dropshipping), the minimum order, payment terms, delivery, and a permanent link to a price list with stock levels or API access (more).

    How many letters can I send per day?

    One per supplier per 24 hours, up to 30 per account. AI drafts: three per supplier per 24 hours, and twenty AI requests for the whole account.

    Can I send the letter to a different supplier address?

    No, only to the email from the catalog. Write to another address from your own mailbox, or add the supplier as a contact and correct the email in their card.

    Can my colleagues see my statuses and notes?

    Yes, they are shared across the whole account. There are no separate lists per employee.

    Where it is and who has access

    Menu
    Directories → Contacts → Suppliers catalog, “My suppliers” on the left
    In the card
    the “My notes” block and the “Write to supplier” button
    Access right
    the “Supplier catalog” window
    Prepare
    your email address: the supplier's reply will go there

    Statuses, terms and notes are shared across the whole account: a colleague opens the same supplier and sees what you recorded. There is no separate list per employee. How to find a supplier in the catalog and connect them is covered in Supplier catalog.

    Related topics

    Was this article helpful?

    Missing a feature? Tell us.

    We will add it for free if other users need it too.

    If only you need it, we will agree on it separately.

    Article contents

    Suggest an improvement

    Try Elbuz free