↑↓ selectEnter openEsc close

    1. Elbuz

    Shifts and till settings: opening float, X report, closing

    5 min readUpdated

    The administrator sets up a till once (warehouse, PRRO, price rule, cashiers), and the shift tracks what the drawer should hold. The seller just counts cash at opening and closing.

    When you need this:

    • Your first till — point of sale, warehouse and cashiers are set once, hidden from the seller.
    • Cash doesn't add up — the shift shows the expected amount and the difference at closing, shortages in red.
    • Takings collected or change brought — cash in and cash out are recorded in the shift.
    • A till with a PRRO — closing the shift also runs the fiscal Z report.

    Where to start: create a till.

    What settings and shifts can do

    • Till list — point of sale, warehouse, PRRO, price rule, discount limit, cashiers, shift history.
    • Till selection — a single till opens right away, several show as tiles.
    • Opening a shift with an opening float.
    • Cash in and cash out — recorded in the shift as cash receipts and cash payments.
    • X report and closing with a cash count, difference and PRRO Z report.

    How to set up a till

    A till is a seller's workstation: which warehouse to write goods off, which point of sale to record in the order, whether to issue a fiscal receipt. The administrator sets it up once; the seller doesn't see or change these fields.

    Where: the “POS” window → “Till settings” → “Add a till”. The “Till settings” gear is on the sales screen (in the top bar), on the “Choose a till” screen (to the right of the title) and on the “Open shift” screen (as a button). Until there are any tills, the window offers “Create a till” right away.

    Till settings panel for Till 1 with fields from Point of sale to Shift history
    1Point of sale
    2Warehouse
    3Fiscal register
    4Price source
    5Maximum discount, %
    6Cashiers
    7Use shifts
    8Shift history
    1. Point of sale — the source written into orders created at this till.
    2. Warehouse the goods are taken from — stock is deducted from it.
    3. Fiscal register — the fiscal service used for receipts.
    4. Price source — which price the till uses.
    5. Maximum discount, % — the limit for a cashier's discount.
    6. Cashiers — users allowed to work at this till.
    7. Use shifts — enables opening float, cash in/out and closing with a count.
    8. Shift history — previous shifts with cashier and totals.
    FieldWhat it doesDefault
    Till nameThe label on the tile and the till's top bar. A till without a name won't saveempty
    Point of sale (source in the order)Written to the “Source” field of the order, the sales receipt, the sale's cash receipt, and the cash-in and cash-out documents — this is how store sales are told apart from online ordersempty
    Warehouse the goods are taken fromThe sales receipt writes goods off here, returned goods come back here, and search tiles show stock from here. Active warehouses onlyfirst warehouse
    Fiscal registerThe PRRO cash register for the fiscal receipt. “No fiscal receipt” — no receipt is issuedno fiscal receipt
    Price source“RRP, otherwise price” or “Price only” — how the price is calculatedRRP, otherwise price
    Maximum discount, %How many percent the receipt price can be below the shelf price. 0 — no discounts0
    CashiersWho works at this till. The list shows active employeesnobody
    Use shiftsOn — sales only in an open shift with an opening float and a cash count. Off — the till sells right awayoff
    Till is activeA deactivated till disappears for cashiers; the next action at it replies “This till is unavailable…”on

    One PRRO — one till. The software won't save a PRRO that's already selected for another active till. Otherwise, closing a shift at one till would close the fiscal shift of the other.

    Shift history under the form shows the till's last 30 shifts: number and opening time, who opened it, sales total and cash difference. For an open shift, sales are counted as of now and the difference shows “…”; for a closed shift, both numbers are fixed at the moment of closing.

    In the same window, above the till list, there's a “Loyalty” button: the loyalty program, shared by all tills and the website.

    How a seller gets to their till

    A seller sees only the active tills where they're in “Cashiers”. Anyone with the “Work on any till without being assigned” right sees all active tills.

    Tills availableWhat opens
    OneThat till, right away
    SeveralThe “Choose a till” tiles. The chosen till is remembered in this browser and opens on its own next time; to go back to the choice, use “Switch till”
    None, with the “Till settings” right“There are no tills yet. Create the first one…” and the “Create a till” button
    None, without the right“You are not assigned to any till. Contact the administrator.”

    How to run shifts: opening float, cash in, X report, closing

    Shifts are for when the cash in the drawer has to match the sales. You turn them on with the “Use shifts” checkbox in the till settings. Without it, the till sells right away, there are no shift buttons, and the PRRO's fiscal shift is closed by its own “Close the shift every evening” option, which is on by default.

    Opening a shift

    Until a shift is open, the till shows the “Open shift” screen instead of sales. Count the cash in the drawer and enter the “Opening float” — by default it holds the actual amount the previous shift closed with.

    Open shift screen for Till 2 — Podil store
    1Opening float
    2Open shift
    3Till settings
    1. Opening float — the cash counted in the drawer at the start of the shift.
    2. Open shift — starts the shift (not pressed).
    3. Till settings — opens the list of tills and their settings.

    A till can have only one open shift, and any cashier of this till can continue it. The top bar shows “Shift No. … since … · …” — the number, opening time and who opened it. Sales, returns, cash in and cash out don't go through without an open shift.

    Cash in and cash out

    “Cash in” and “Cash out” record money that came into or left the drawer other than through a sale: change brought by a manager, cash collection. Enter the “Amount” and a “Comment”. The software creates a posted cash receipt or cash payment with the note “Till "…", shift …” and counts it in the shift totals. The buttons are visible only with the “Cash in and cash out” right.

    Cash in dialog with amount and comment filled in
    1Amount
    2Comment
    1. Amount — the sum of cash put into the drawer.
    2. Comment — the reason for the cash-in.

    X report

    “X report” shows the current shift's totals without closing it: the number of receipts, sales, cash, card, discounts, returns, opening float, cash in, cash out and “Expected in the drawer”. Only posted sales are counted; cash and card come from the cash receipts of sales and of gift cards sold, so a split payment is spread over two lines.

    When the shift had gift cards, the report shows extra lines — each one when its amount isn't zero:

    • “Paid by gift cards” — the part of receipts covered by gift cards; it isn't included in “Cash” and “Card”;
    • “Gift cards sold (advance, not revenue)” — the money for gift cards sold. It's already in “Cash” or “Card”, and for those sold for cash — in “Expected in the drawer” too, but not in “Sales”.

    More: Gift cards in the shift report.

    The “Paid by QR” line appears when customers paid by QR code. This money is in the payment service account, so it isn't included in “Cash”, “Card” or “Expected in the drawer”.

    A payment that arrived after the QR payment was cancelled goes here too. A return of a QR sale goes into the “Returns” line but doesn't reduce “Expected in the drawer”.

    X report dialog for shift No. 2 with the shift totals
    1Cash
    2Cash in
    3Expected in the drawer
    1. Cash — the cash sales taken during the shift.
    2. Cash in — money added to the drawer during the shift.
    3. Expected in the drawer — the cash amount the drawer should hold now.

    “Expected in the drawer” = opening float + “Cash” (including cash for gift cards sold) + cash in − cash out − cash refunds.

    Closing a shift

    “Close shift” shows the same totals and a “Counted in the drawer” field that already holds the expected amount. Count the cash and enter the actual amount: “Difference” is calculated right away, with a shortage in red.

    Close shift dialog with a counted amount 50 lower than expected
    1Expected in the drawer
    2Counted in the drawer
    3Difference
    4Close shift
    1. Expected in the drawer — the cash amount the system expects.
    2. Counted in the drawer — the amount actually counted, 50 lower than expected.
    3. Difference — shows -50.00 in red.
    4. Close shift — the button that confirms closing the shift.

    After you confirm, the shift totals are saved as they were at the moment of closing, and the “Shift No. … closed” report appears. After that, the till asks you to open a shift again.

    If the till has a PRRO, closing the shift runs the Z report for the fiscal shift — and it can't be undone. A PRRO failure doesn't stop you from closing the shift in Elbuz: you'll see “The shift is closed, but the fiscal Z report failed: …”, and you can run the Z report separately — how to close a PRRO shift.

    A shift open for more than 24 hours doesn't block sales, but the top bar shows “The shift has been open for more than a day — close it.”

    Scenarios

    One store without shifts or a PRRO

    What to set up. One till: point of sale, the store's warehouse, “No fiscal receipt”, “Use shifts” off, sellers in “Cashiers”.

    What you get. The seller opens “POS” and sells right away. Warehouse stock goes down with each sale, the money shows up as cash receipts, and the sales appear in the order list with the store as the source.

    The owner wants the cash to add up

    What to set up. “Use shifts”; sellers without the “Cash in and cash out” right — the manager gets it.

    What you get. The seller starts the day with an opening float and ends it with a cash count. The manager records cash collections. A shortage shows up at closing and stays in the till's “Shift history”.

    Two outlets, each with its own PRRO

    What to set up. Two tills, each with its own warehouse, point of sale and PRRO; cashiers assigned to their own tills.

    What you get. Each seller sees only their own till, goods are written off its warehouse, the fiscal receipt goes through its PRRO, and the Z report at shift closing closes only its fiscal shift.

    What to do when the till won't open

    Till and shift messages
    What you seeWhyWhat to do
    “You are not assigned to any till. Contact the administrator.” The seller isn't in “Cashiers” of any active till The administrator adds them to “Cashiers” of the right till
    “This till is unavailable: it was switched off or you were unassigned from it…” The till was deactivated, or the seller was removed from “Cashiers” while the window was open Choose another till or ask the administrator to restore access
    “No open shift: open a shift to sell.” The till was switched to shifts, or the shift was closed on another computer Open a shift with an opening float
    “You do not have access to this action. Contact the administrator.” The “POS” window or the right to the action itself is closed — for example, till settings or cash in The administrator grants the department the right it needs
    “The till is busy with another operation (a sale or a shift)…” Another operation is running at this till right now — from another computer or tab; operations of one till run one at a time, and this one waited more than 5 seconds Try again in a few seconds: a repeat won't create a second sale
    “The shift is closed, but the fiscal Z report failed: …” The PRRO didn't respond; the shift in Elbuz is closed Close the fiscal shift separately — how
    “This fiscal register is already linked to another active till: one register — one till.” The PRRO is already selected in another active till Choose another PRRO or deactivate that till

    FAQ

    The seller closed the window mid-shift. What happens to the shift?

    Nothing: the shift stays open at the till until someone closes it. Any cashier of this till can open the window and continue it.

    Where does a new shift's opening float come from?

    The software fills in the actual amount the till's previous shift closed with. If part of it was taken as a cash collection, correct the amount before opening.

    We entered the wrong actual amount at closing. Can we fix it?

    No, a closed shift can't be reopened or recalculated: its totals are fixed. Account for the difference with a cash in or cash out in the next shift.

    Can I work without shifts?

    Yes, that's the default: “Use shifts” is off and the till sells right away. Documents and cash receipts are created the same way.

    One cashier works at two tills. What do I do?

    Add them to “Cashiers” of both tills. When they open the window, they choose a till by its tile, and “Switch till” takes them back to the choice.

    Where it is and who has access

    Menu
    “Directories” → “Documents” → “POS”
    Settings
    in the “POS” window — the “Till settings” gear
    Access rights
    settings — the “Till settings” right; cash in and cash out — a separate right; shift — the “POS” window
    Prepare
    the outlet's warehouse, employees who will be cashiers; for a fiscal receipt — a connected PRRO

    Related topics

    Was this article helpful?

    Missing a feature? Tell us.

    We will add it for free if other users need it too.

    If only you need it, we will agree on it separately.

    Article contents

    Suggest an improvement

    Try Elbuz free