↑↓ selectEnter openEsc close

    1. Elbuz

    How to pick orders by bin: picking, waves, tasks

    12 min readUpdated

    Elbuz tells you which bin to take goods from: picking locations first, then reserve; within them, the nearest expiry date and the bin the goods went into earliest. The picker walks the addresses once, and the warehouse and bins change when the document is posted.

    When you need this:

    • Several orders at once — the picking list combines lines and sorts them by address.
    • Several pickers — a wave is split into tasks by zone.
    • Goods are not in place — the step is recorded as a shortage, visible on the “Tasks” tab.

    Where to start: picking list or wave.

    What picking can do

    Where the system takes goods from when they go out

    If the warehouse has location types, “Picking” and untyped locations come first, then “Reserve”; “Receiving” and “Blocked” are not suggested. This applies to outbound suggestions, the picking list and waves. Posting without a plan follows the same order, then takes “Receiving”, expired goods and “Blocked” last, so the books match the document. Type beats expiry: “Picking” with a distant date goes before “Reserve” with a near one. Within a type, the order is:

    Goods with the nearest expiry date go first. Then goods without a date: the bin they went into earliest goes first — first in, first out. With equal dates, the address decides. The suggestion never offers expired goods, and posting takes them last.

    The date is when the goods first went into that bin: adding to a non-empty bin does not shift it, and a bin that has been emptied starts over. This date is shown in the “Placed” column on the “Stock by bin” tab.

    In a sales invoice card, the “Bins” button opens “Picking”: the suggestion has already split the quantity across bins, and if one bin is not enough, it adds a line with the next.

    The “Picking” window of a sales invoice: the hint split the quantity across two bins
    1First bin
    2Next bin
    3“Save bins” button
    1. The bin where the goods arrived earliest comes first.
    2. If one bin is not enough, the hint adds the next one.
    3. Save only if you changed the hint.

    To take goods from another bin, correct the address and click “Save bins”. If you don't save, posting takes the same bins as the suggestion. The exception is an invoice based on an order picked with a task: it takes that order's bins. Sales receipts, returns to supplier and write-offs work the same way.

    A shortage in bins does not stop posting: warehouse stock is written off in full, and the difference shows in the “Bin locations” window
    NoYesYesNoYesNoYesNo, bins are shortYesNoA sales invoice or another documentthat writes off goods is postedWarehouse stock drops by the fullquantityDoes the warehouse use binlocations?Bins do not changeAre bins set in the document or inthe picked order?Write off from these bins first, asmuch as they holdBins by location type, expiry, thenput-away dateQuantity covered?DoneQuantity covered?The rest is written off from “Notplaced”; posting does not stopWas “Not placed” enough?Warehouse stock is below the bintotal: the window shows “Mismatch”
    • Action or result
    • Decision: the path depends on the answer

    A customer order does not write off stock, so its “Bins” button only shows “Where the goods are”, with no saving. Bins to write off from are set in the sales invoice created from the order. Order reservations are kept at warehouse level; goods are not tied to bins.

    What posting does for each document type:

    DocumentBins entered and savedNo bins entered
    Purchase invoice, stock postinggoods go into the entered binsgoods become “Not placed”
    Sales invoice, sales receipt, return to supplier, write-offthe entered bins first; any shortfall by location type, expiry date, then put-away datebins by location type, expiry date, then put-away date; then receiving, expired and blocked last; any shortfall from “Not placed”
    Stock transferwrite-off at the sending warehouse and put-away at the receiving warehouse into the entered binsthe sender in the same order; at the receiver, goods become “Not placed”
    Stock countbins are not entered in itcounted less than in bins — the excess is removed from bins in the same order; more — the difference becomes “Not placed”

    In a stock transfer, bin locations work only at the warehouse where they are turned on: the other warehouse moves goods as usual.

    How to pick several orders in one walk

    In the document list, select the documents you need and click “Picking list”. In a warehouse with bin locations, a product line is split by bin: the picker sees how much to take from each, and lines are sorted by address, so the warehouse is walked once.

    Picking list: product lines sorted by bin address
    1“Location” column
    2“In orders” column
    1. The bin address: lines follow the walking order.
    2. Which orders the picked goods go to.
    • The quantity goes first to bins saved in the documents, then to bins by location type, expiry date and put-away date. The list does not suggest expired goods on its own, but a bin entered in the document manually will appear in it.
    • A shortage is shown as a separate line with the product card's text field “Stock location”; if it is empty, the “Location” column is empty too.
    • The list does not write off or reserve anything. Bins change when you post the sales invoices.

    For other features of the window, including “Mark as collected”, see actions on a batch of documents.

    How to give a picker a task and pick a wave

    A wave picks several documents in one walk. On the “Tasks” tab, click “Create wave”: the list shows this warehouse's unposted outbound documents and posted orders with unshipped quantities. Select documents, choose a picker or leave “Whoever takes it first”, and click “Create tasks”.

    The “A separate task for each zone” toggle splits a wave into tasks by zone; for different people to take them, leave “Whoever takes it first”.

    The “Create wave” window: picker, split by zone and the documents to pick
    1Picker
    2A separate task for each zone
    3Wave documents
    1. Choose a picker or leave “Whoever takes it first”.
    2. The switch splits the wave into tasks by zone.
    3. The checked documents are picked in one walk.

    The system splits the quantity across bins: those saved in the document first, then by location type, expiry and date; it does not pick expired goods on its own. Goods held by another task are not allocated twice. Whatever the bins lack goes into the task separately and counts as a shortage.

    The “Tasks” tab: task statuses, picker, required and picked
    1Status
    2Picked
    1. New, In progress, Done or Cancelled.
    2. Less than required is shown in red.
    1. New. The task is visible to the assigned picker, or to everyone if unassigned.
    2. In progress. The picker has opened the task on the scanner screen. Someone else's task cannot be taken.
    3. Done. What was picked becomes the document's bins. Less than needed shows in red in the “Picked” column, and on posting the system offers to reduce the quantity.
    4. Cancelled. A new or in-progress task can be cancelled: the goods are released, and the document can be picked again.

    A picking task does not change stock. The warehouse and bins change on posting: picked goods are written off first, the rest from bins in the usual order, then from “Not placed” — a task shortage does not reduce the document quantity. Posting from the card or list offers to reduce it; the shortage shows in red in the “Picked” column. If the goods really are missing, correct the quantity before posting. A sales invoice based on a picked order takes the order's bins. The system posts the document itself only with “Post on packing” on.

    What to do when less was picked

    If picking is finished but less was picked than the document quantity, posting from the card or list shows a dialog: products as “Picked / on the document” and the “Reduce the document quantity to what was picked” checkbox, selected by default.

    • “Post” reduces the quantity, recalculates the total and records this in the document history.
    • Without the checkbox, the full quantity is posted, as before.
    • “Cancel” changes nothing.

    Posting is not blocked. While a task is in progress, there is no warning. Posting via the API, rules or packing does not show the dialog.

    Posting dialog: less was picked, and the checkbox “Reduce the document quantity to what was picked”
    1Checkbox
    1. On by default: the quantity is reduced to what was picked and the total is recalculated. Unchecked: the full quantity is posted.

    How to pick several orders onto a cart

    Create a location of the “Cart” type (for example, zone CART1) with nested slot locations — “Create bins” makes this easy. Labels print as usual. To send finished tasks to a separate place, create a location of the “Consolidation” type. Goods on a cart or in consolidation are not tracked there: stock stays in the bin until the document is posted.

    In the wave dialog, set “Orders per cart”: 0 means shared picking, as before; above 0, the wave is split into tasks with that many orders each, and the “A separate task for each zone” toggle has no effect. The task grid has “Mode” and “Cart” columns.

    1. The picker opens the task and scans the cart. The screen refuses if it is not a cart, it is a slot instead of a cart, there are too few slots, or the cart is held by another unfinished task.
    2. Then as usual: bin, product, quantity. A step combines the product across all orders on the cart.
    3. The screen shows the slot, the order and “Put N”: the picker scans the slot. A wrong slot is not accepted; “Confirm without scanning” is available. If fewer were found, the picked goods are handed out to orders in turn, and the screen shows “This order is short by N”. An order that got nothing gets no separate message; you can see it in the “Picked” column.
    4. “Finish task”: if the warehouse has consolidation locations, take the cart there and scan the location; without them, the task finishes at once. After that, the cart is free.

    The picker cannot change carts mid-pick. A manager selects the row on the “Tasks” tab and clicks “Release cart”: the task stays, the picker scans a new cart, and the orders get slots again. If the picker's screen was open, it shows “Scan the cart first.”, and the task must be reopened. Unload the goods from the previous cart manually.

    The “Tasks” tab: “Kind”, “Mode” and “Cart” columns, replenishment and packing buttons
    1Kind
    2Mode
    3Replenishment rules
    4Packing
    1. Picking or Replenishment.
    2. Cluster: several orders on one cart.
    3. Minimum and maximum for picking bins.
    4. The list of packings with status, boxes and printing.
    Scanner screen, putting onto the cart: “Put 1”, slot CART1-03 and the order number
    1Slot
    2Order
    1. The cart slot to put the item into; the screen will not accept a scan of another slot.
    2. The order this slot is assigned to.

    How to replenish picking bins

    On the “Tasks” tab, the “Replenishment rules” button: product (barcode or SKU), a bin of the “Picking” type, minimum and maximum. The maximum must be greater than the minimum, and the system will not accept a bin of another type. Deleting the bin or the product removes the rule.

    A task is created with the “Replenish” button or automatically after a wave with a product that has a rule; there is no schedule. If a bin holds less than the minimum, not counting goods held by waves, the task brings it up to the maximum from “Reserve” locations by expiry, within bin capacity. While a task has an unconfirmed line, no second one is created for the same bin + product pair. With no reserve, the system shows “Nothing to replenish”. The “Kind” column in the task grid shows “Picking” or “Replenishment”.

    A product with a rule does not go into a wave straight from reserve unless the reserve bin is entered in the document: until replenished, it counts as a shortage. A product without a rule is taken from reserve after picking locations, as before. When the picker opens a task, lines without a bin are reallocated, so goods already brought in will get into the task.

    In a warehouse with rules, the scanner screen has a “Replenishment” tile: scan the reserve bin, scan the product, quantity, scan the picking bin. The screen shows where to put the goods and will not accept a wrong bin. Each step immediately posts a “Bin transfer” document; the batch and expiry date travel with the goods. If fewer were found, the entered quantity is moved.

    The “Replenishment rules” window: product, picking bin, minimum and maximum
    1Product
    1. The product barcode or SKU.
    Scanner screen, replenishment task: reserve location, product and quantity
    1Where to take from
    2How many
    1. The reserve location address.
    2. How many to take to replenish the picking location.

    How to pack orders into boxes

    The “Packing” toggle on the “Tasks” tab is off by default: tasks finish as before. When on, an order joins the queue once all its tasks are done, e.g. in two zones. An order with a posted outbound document leaves the queue; one with nothing picked never joins. Orders can be picked in parts: a new wave is allowed once the previous part shipped on a posted invoice or its task was cancelled. It joins the order's open packing or a new one, expecting only its own part. The scanner screen gets a “Packing” tile.

    1. The packer scans the document number or a cart slot, or chooses an order from the list. The order is assigned to them; others cannot see or open it.
    2. They scan the product barcode or SKU; case does not matter. The quantity field sets how many to add. A product not in the order, or more than was picked, gives a red error.
    3. The cross removes a wrong scan: it takes that product out of all the order's boxes.
    4. “New box” adds the next one. A box has “Weight, kg” (suggested from product cards if they have the data) and “Dimensions” fields.
    5. “Finish packing”. If less was packed than picked, the screen shows a list and asks you to confirm, and the number of discrepancies appears in the packing list.
    6. A print page opens: a packing slip by box and 60×40 mm box labels with a number and a Code128 barcode. Only Latin letters and digits go into the barcode: Cyrillic characters in the number are dropped.

    With “Post on packing” (off by default, works only with “Packing”), an unposted outbound document is posted when packing finishes. Without document access, the screen shows “Bins are saved. A colleague with document access will post the document.” Customer orders are not posted this way: post them via a sales invoice, as before. Packing does not change the document quantity. With a shortage or less packed than picked, the document is not posted: the scanner shows “Not posted: there is a shortage. Post the document manually.”, and the packing window shows the reason next to the status.

    The “Packing” button on the “Tasks” tab shows a list: status, packer, number of boxes and discrepancies, printing. Box weight and dimensions are shown in the “Bins” window of the packed document; a sales invoice based on a packed order does not have them. A carrier waybill is created as before: box data is not filled in.

    The “Packing” window: document, status, packer, boxes and printing
    1Print
    1. Packing slip and box labels for a packed order.
    Scanner screen, packing: quantity, order items, box with weight and dimensions
    1Quantity
    2Weight and dimensions
    3New box
    1. How many units the next scan adds.
    2. Weight and dimensions of this box.
    3. The next box of the order.
    The document “Bins” window: box weight and dimensions
    Order packing slip: items by box and a box label with a barcode
    1Box
    2Label
    1. What is in each box.
    2. A 60×40 mm label with the order number, box number and barcode.

    How to pick with a phone or scanner

    Choose a task. The screen guides you by address: scan the bin, then the product, and confirm the quantity. It will not accept a wrong bin or product; the “Confirm without scanning” button skips one scan, but you still have to confirm the quantity. If the product is missing, tap “Nothing here”: the step is recorded as a shortage. “Finish task” writes the result to the documents.

    Picking on the scanner screen: location, product, batch, quantity and the “Nothing here” button
    1Location
    2Quantity
    3Nothing here
    1. The address to go to next.
    2. How many to take from this location.
    3. The button records the step as a shortage.

    Scenarios

    Twenty orders need picking in the morning

    What to do. Select the orders in the document list, click “Picking list” and print it. After picking, create sales invoices based on the orders and post them.

    What you get. The picker walks the addresses once. Bins are written off when the invoices are posted; without saved bins, the same ones as in the “Picking” suggestion are written off.

    The picker could not find some of the goods

    What to do. On the scanner screen, tap “Nothing here” and finish the task. Post the document and leave the “Reduce the document quantity to what was picked” checkbox selected.

    What you get. The document writes off the picked quantity, and the shortage stays visible in the task. If you clear the checkbox, the rest is written off from bins in the usual order, even from the one where the goods were not found, and then from “Not placed”.

    What to do when something goes wrong

    Common problems
    What you seeWhyWhat to do
    The document card has no “Bins” button Bin locations are off for the document's warehouse, no warehouse is selected in the document, or the document type neither moves nor reserves goods Select the warehouse: the button appears at once. If bin locations were turned on while the card was open, close it and open it again
    “The document is already posted. Unpost it to change bins.” Bins can be edited only in an unposted document Unpost, change the bins, post again

    FAQ

    The picker recorded a shortage. Why did the document write off everything?

    A shortage by itself does not change the quantity. When posting from the card or list, leave the “Reduce the document quantity to what was picked” checkbox selected. If you clear it, the rest is written off from bins in the usual order and from “Not placed”.

    Why are expired goods missing from the suggestion?

    The system does not offer them, but they stay in the bin. Posting takes them almost last (only “Blocked” comes after), and you can enter such a bin in the document manually.

    An order shows bins, but nothing changes. Why?

    A customer order does not write off stock, so “Where the goods are” is only a hint. Bins change when the sales invoice is posted.

    Does the picking list write off goods?

    No, it does not write off or reserve anything. Bins change when you post the sales invoices.

    Where it is and who has access

    Menu
    Directories → Base product catalog → Bin locations → “Tasks” tab
    Other entry points
    the “Bins” button in the document card; “Picking list” in the document list; the scanner screen
    Access right
    the “Bin locations”, “Document bins” or “Scanner screen” windows
    Prepare
    goods placed in bins; unposted outbound documents or posted orders

    Related topics

    Was this article helpful?

    Missing a feature? Tell us.

    We will add it for free if other users need it too.

    If only you need it, we will agree on it separately.

    Article contents

    Suggest an improvement

    Try Elbuz free