↑↓ selectEnter openEsc close

    1. Elbuz
    2. AI in CRM

    Analysis of calls, emails, and chats: what AI does on its own and what it costs

    4 min readUpdated

    Elbuz reads new emails, stalled chats, and call recordings and turns them into “Pulse” suggestions: a deal, follow-up, reply, contact detail. No more replaying calls or rereading mail.

    When you need this:

    • Follow-ups forgotten after calls — AI suggests one with the next step and date from the call.
    • Email from a new customer — Elbuz creates the contact with an owner.
    • Complaints lost in the inbox — “Complaint → manager” creates a task for the manager.
    • Stop AI or cap spending — each AI employee has a switch and daily budget.

    Where to start: email analysis is on; for calls, turn it on in the telephony provider form.

    What analysis does

    Two AI employees do the analysis: emails and chats go to “AI · Support”, calls to “AI · Sales”.

    • Emails — reason, tone, gist, entities, and a draft reply; automated emails are filtered out.
    • Chats — a deal, follow-up, or task from a stalled conversation with a customer.
    • Calls — transcript, summary, contact details, and the next step.
    • New customers — created with an owner (responsible manager).
    • Suggestions in “Pulse” — plus flows that run after analysis.
    • Switches and budget — separately for emails, calls, or the whole agent.

    How AI analyzes emails

    Analysis of new emails is on by default. Every 5 minutes, “AI · Support” takes up to 20 unanalyzed incoming emails no older than two days — by both the received date and the email's own date. The email-date limit keeps AI from analyzing, at a cost, all your old mail after you connect a mailbox.

    Email analysis and ready-made AI flows only run while the is in use.

    • Automatic email analysis and ready-made flows with an AI agent (“Win back dormant customers”, “Cross-sell after purchase”) run only if someone opened “Pulse” or “Mail” in the last 14 days.
    • Nobody opened them for 14 days — they stop, and nothing is charged. Once someone opens them, everything turns back on by itself, and emails from the last two days get analyzed.
    • The rule doesn't apply to your own flows (built in the builder or described in words), or to chat and call analysis. Their spending is capped by the AI employee's daily budget in “Pulse” → “Agents”.

    Automated emails are filtered out before analysis, free of charge: those in the “Spam”, “Trash”, “Sent”, and “Drafts” folders, from addresses like noreply and mailer-daemon, with auto-reply, mailing-list, or delivery-failure headers, and emails from your own domain. Addresses from the “Ignore email addresses” setting (when its switch is on) are marked as skipped.

    System settings, Contacts and CRM section: the
    1AI analysis of new emails
    2Switch
    1. AI analysis of new emails — every new email from a person gets its intent, priority, gist and a draft reply.
    2. The switch turns the automatic analysis on or off for the whole account.

    From an email, AI determines the intent and reason, priority, tone, gist, entities in the email (order numbers, products, phone numbers, amounts), who the sender is — customer, supplier, partner — and writes a draft reply. For reasons and replies, see Customer replies.

    The sender doesn't need to be a contact already: with “Create a contact from email” → “After check (recommended)”, the analysis itself creates the contact if it identifies a customer, supplier, or partner with a confidence of 0.7 or higher.

    You can also analyze any email manually with the “AI answer from knowledge base” button in the reply window. An email that has already been analyzed isn't charged again.

    How chats are analyzed

    Chats have no separate switch — “AI · Support” analyzes them while it's on.

    It takes customer-linked chats with the last message 30 minutes to a day old and at least two customer messages: up to 3 per pass, each at most daily and only if the customer wrote since the last analysis. AI reads the last 20 messages. Website widget chats count too; only your AI consultant chat is skipped.

    Chat analysis runs as the “Chat return notification” background task in the schedule: if it's disabled there, chats aren't analyzed either.

    From a chat, “Pulse” suggests a deal, follow-up, or task, depending on the reason, but not a reply in the chat. Details: Customer replies → Chats.

    How to turn on call analysis

    Call analysis is off by default: turn it on in the telephony provider form, “AI call analysis” card → “Analyze recorded calls automatically”, next to “Minimum talk time, sec” (15 by default). Every 5 minutes, “AI · Sales” takes up to 10 recorded calls at least that long, no older than 3 days, made after it was turned on.

    First the call is transcribed (the language is detected automatically; files over 25 MB and recordings without speech are skipped).

    Then AI pulls from the call a summary, name, phone numbers, email, products and order numbers, intent, tone, the next step, and its date. A call that failed analysis isn't retried automatically, but the “Transcribe” and “Transcribe again” buttons on the call panel work even with automatic analysis off.

    How to connect a provider and what the call panel shows: Telephony: AI call analysis.

    Who becomes the owner of a new customer

    A customer that Elbuz created on its own from a chat, email, call, or abandoned cart gets an owner right away:

    • call — whoever took the call;
    • email, “Create contact” — whoever clicked the button;
    • everything else — the sales manager with the lightest workload: open deals they own plus their customers. The sales department is the one whose role's default window set includes the deal board; virtual and inactive employees are skipped.

    No sales department, or no managers in it — the customer stays without an owner. The “Lead without an owner” flow picks it up later — Automations (CRM flows).

    Where the results go

    ChannelWhere you see the analysisWhat “Pulse” suggests
    Emailreason badge in the email list, draft and sources in the reply windowa reply to the customer, deal, follow-up, moving a stage, task
    Chat“Request type (AI)” badge in the chat listdeal, follow-up, task
    Call“Reason” column in the log; call panel: summary, “From the call”, “Next step”, “Suggestions for the card”, transcript; the summary goes to the customer card feeda follow-up on the next-step date (no time given — 10:00), a phone number or email for the card, a deal

    After an email or call is analyzed, flows with the “AI analyzed an email or call” event run — including “Complaint → manager”. Analyzing the same email or call again doesn't create duplicates in “Pulse”.

    Analysis only suggests: data changes when a person accepts the suggestion, or when “Management” has trusted AI with that type of action in “Pulse” → “Trust”.

    What analysis costs

    WhatHow it's chargedMeasured on an Elbuz test account
    Email analysisby actual AI tokens, CRM automation rate; each email onceabout $0.003 per email on average
    Chat analysisthe sameabout $0.004 per chat
    Call analysisAI tokens only, no subscription: speech recognition and text analysis—
    Automated emails, ignored addressesfree—

    The measurement is the average from the charge log of an Elbuz test account on 13–14.10.2026. How much each AI employee spent today and over 7 days is shown in “Pulse” → “Agents”; the daily budget is there too, “no limit” by default.

    How to turn analysis off

    What to turn offWhere
    EmailsAccount → System settings → “Contacts and CRM” → “AI analysis of new emails”
    Callstelephony provider form → “AI call analysis” → “Analyze recorded calls automatically”
    Everything at onceDirectories → Contacts → Pulse → “Agents” tab → the agent's “On” switch
    AI Pulse window, Agents tab: AI · Sales and AI · Support rows with Working switches
    1AI · Sales
    2AI · Support
    3Working switch
    1. AI · Sales — leads, deals, follow-ups, reactivation and stuck orders.
    2. AI · Support — customer emails and chats and knowledge-base answers.
    3. The Working switch enables or disables the agent; a disabled agent stops all its work.
    • Turning off “AI · Support” stops email and chat analysis and the “Complaint → manager” flow.
    • Turning off “AI · Sales” stops call analysis and the CRM flows that run on its behalf.
    • A used-up daily budget stops email, chat, and call analysis the same way, until the next day.
    • Manual buttons — “AI answer from knowledge base” in an email, “Transcribe” on a call — work even with the agent off.
    • Chats have no separate switch: only turning off “AI · Support”.

    Before turning an agent off, Elbuz asks “Disable the agent?”. Only “Management” can turn agents on and off; everyone else sees “Only Management can enable and configure agents.”. For agents in general, see AI employees.

    What to ask the AI consultant

    • “What did the AI employees do today?”;
    • “What do customers write about?” — topics of tickets without a reason over 30 days;
    • “What's new in Pulse?” — suggestions from email, chat, and call analysis;
    • “Have Support analyze yesterday's unanswered emails” — a task for an AI employee; details: Delegating to specialists from the chat.

    Scenarios

    You connected a mailbox with years of archive

    What you get: AI analyzes only emails received and written no more than two days ago. The archive isn't analyzed or charged; analyze an old email you need manually with the “AI answer from knowledge base” button.

    Managers forget to schedule a follow-up after a call

    What to do: in the provider form, turn on “Analyze recorded calls automatically”.

    What you get: a few minutes after the call, “Pulse” shows a follow-up on the next-step date from the call (no time given — 10:00), and the summary goes to the customer card feed.

    Nobody opened the CRM for two weeks

    What you get: email analysis and ready-made AI flows stop, and nothing is charged. Once someone opens “Pulse” or “Mail”, analysis turns back on by itself and catches up on emails from the last two days.

    FAQ

    Is email analysis on for me right now?

    By default, yes, if someone opened “Pulse” or “Mail” in the last 14 days; otherwise analysis is paused to avoid spending money. Check “AI analysis of new emails” in “System settings” and that “AI · Support” is on in “Pulse” → “Agents”.

    Why aren't calls being analyzed?

    Call analysis is off by default: turn it on in the provider form. Other reasons: no call recording, the call is shorter than the minimum, or “AI · Sales” is off.

    Will AI analyze all my mail after I connect a mailbox?

    No. Automatically, only emails received and written no more than two days ago. You can analyze older ones manually.

    Who becomes the owner of a customer from a chat?

    The sales manager with the lightest workload. No such department — the customer stays without an owner, and the “Lead without an owner” flow picks it up.

    How do I turn everything off at once?

    In “Pulse” → “Agents”, turn off “AI · Support” (emails, chats) and “AI · Sales” (calls, CRM flows). Only “Management” can do this.

    Where it is and who has access

    Menu
    Directories → Contacts → Pulse → “Agents” tab
    Other ways in
    System settings → “Contacts and CRM” (emails); telephony provider form (calls)
    Access right
    only “Management” can turn agents on and off; results follow access to mail, calls, and the customer
    Prepare
    a connected mailbox; for calls, a telephony provider that records calls

    Related topics

    • If you need to understand why the draft reply looks the way it does — Customer replies.
    • If a telephony provider isn't connected yet — Telephony.
    • If you want to set an AI employee's budget or prompt — AI employees.
    • If emails don't reach Elbuz at all — Working with mail.

    Was this article helpful?

    Missing a feature? Tell us.

    We will add it for free if other users need it too.

    If only you need it, we will agree on it separately.

    Article contents

    Suggest an improvement

    Try Elbuz free