↑↓ selectEnter openEsc close

    1. Elbuz

    How to automatically follow up with people who didn't reply to a newsletter

    3 min readUpdated

    Elbuz sends newsletter follow-ups itself: up to three emails to non-responders, after set business days, in the same thread. Anyone who replied, unsubscribed or has a dead address gets none.

    When you need this:

    • A cold email to suppliers got lost — three business days later, a “just following up on my email” goes out with “Re:” in the subject.
    • Someone replied on Friday, the follow-up is due Monday — before each email the app rechecks “Mail” and skips repliers.
    • No time to write texts — three ready-made follow-ups, one click.

    Where to start: the newsletter email → the “Follow-ups to those who did not reply” card → “Add step”.

    What follow-up emails can do

    • Up to three steps — each with its own delay, condition and email.
    • The same thread — a follow-up goes as a reply to the previous email, with “Re:” in the subject.
    • Business days — never on Saturday or Sunday, never before 9:00, and within the main newsletter's sending window.
    • Stop on reply — anyone who replied, unsubscribed or had a bounce is skipped.
    • Ready-made texts — three follow-ups: a simple one, one offering a call, and a final one.

    What to turn on so the app can see replies

    A reply is an incoming email from the person in Elbuz “Mail”. If your mailbox's emails aren't downloaded to Elbuz, the app will assume nobody replied, and follow-ups will go to everyone.

    1. In the card of the mailbox people reply to, turn on “Download emails to Elbuz” (email download).
    2. Make sure mail arrives in the background: the “Receiving email (IMAP)” job turns on by itself when you first connect a mailbox for reading. Without it, emails arrive only while someone works in the “Mail” window (when emails arrive).

    Which emails count as a reply is covered in newsletter analytics.

    How to add a follow-up

    The “Follow-ups to those who did not reply” card is in the window of the main newsletter email. Click “Add step”; you can have up to three steps.

    The “Follow-ups to those who did not reply” card: two sequence steps with counters
    1Replied to the campaign
    2After, business days
    3Send to
    4On
    5Step counters
    6Add step
    1. Those who no longer need the sequence.
    2. Counted from the previous email, without Saturday and Sunday.
    3. “No reply” or “No reply and not opened”.
    4. A step that is off sends to no one.
    5. Waiting for their date, sent, skipped.
    6. Up to three steps; a new one is off, with a ready text.

    A new step is off, with a 3-business-day delay and the “No reply” condition. The step's email takes the sender, reply-to address, “Flood protection” pauses and layout from the main email, and a ready-made follow-up as its text.

    FieldWhat it does
    “After, business days”1 to 30 business days after the previous email to this person; Saturday and Sunday don't count
    “Send to”“No reply” — everyone who didn't reply; “No reply and not opened” — only those who didn't open any email in the sequence
    “On”a step that's off sends nothing, and people who haven't received it yet wait. To stop the whole sequence, use “Pause” on the main newsletter in “Newsletters”
    “Email”opens the step's email: subject, text, preview, test email
    trash candeletes the step together with its email, after confirmation

    Changes in a step row are saved immediately. Under the row are the “Waiting · sent · skipped” counters; hover over them to see how many were skipped because of a reply, a bounce or an unsubscribe. Above the steps you'll see “Replied to the campaign: N”.

    Subject and email thread

    Leave the step's email subject empty: the email will go as “Re: main email subject” in the recipient's language. The app sends it as a reply to the last email in the sequence sent to that person. In the recipient's mail app, the follow-up lands in the same thread. Your own subject works too, but it will look like a separate email.

    The step takes the schedule and “Track clicks” from the main newsletter, and the preheader too if it has none of its own.

    Ready-made texts

    In the step's email, the “Insert a ready-made text” button offers three follow-ups. A simple “just following up on my previous email”, one offering a phone call, and a final “I will not bother you again”. The text replaces the email in the store's language; the signature is your company name. The app asks for confirmation before replacing.

    When a follow-up goes out and to whom

    Step 1 goes to people who received the main email, step 2 to people who received step 1, and so on. The delay counts from the day the previous email went to that particular person. Follow-ups aren't sent on Saturday, Sunday or before 9:00 account time. The hours, weekdays and mailbox limit from the main newsletter's “Schedule and limits” card also apply.

    Example: the main email went out on Tuesday with a 3-business-day delay — the follow-up goes on Friday from 9:00. If it went out on Wednesday — on Monday.

    Who the app skips

    Before every follow-up the app checks “Mail” for a reply again and skips the person if:

    • they replied to any email in the sequence;
    • they unsubscribed or their card is in the Trash;
    • a bounce came back for their address;
    • for the “No reply and not opened” condition — they opened at least one email in the sequence;
    • the main email was never sent to them.

    Skipped people are counted in the step's counter and shown in the “Skipped by a step” segment (segments).

    Scenarios

    Two follow-ups after a cold email

    What to turn on. Step 1: “After, business days” — 3, “Send to” — “No reply”, “Insert a ready-made text” — the first one. Step 2: 3 days, “No reply”, the second text (offering a call). Subjects empty. Both steps — “On”.

    What you get. People who stay silent get a follow-up on the third and sixth business day after the main email, in the same thread. Anyone who replies at any point gets no more emails. “Emails in the sequence” shows how many replies each step brought (emails in the sequence).

    One follow-up to customers who didn't open

    What to turn on. One step: 2 business days, “Send to” — “No reply and not opened”, your own subject with a different promotion headline.

    What you get. Anyone who read the email won't get it again; those who didn't open it will see the promotion once more under a new subject.

    What to do when follow-ups aren't sent

    What you seeWhyWhat to do
    “Waiting” is above zero, but “sent” isn't growing the business day set by the delay hasn't come yet, it's a weekend or before 9:00, it's outside the main newsletter's window, the mailbox limit is used up, or the step is off check the main newsletter's “Schedule and limits” card (schedule and limits)
    “Waiting” is above zero, while “sent” and “skipped” have been zero for several business days the step is off — a new step is always created off, and steps in a newsletter copy are off too turn on “On” in the step row
    People who replied got follow-ups too replies don't reach Elbuz “Mail” turn on “Download emails to Elbuz” in the card of the mailbox people reply to (what to turn on)

    FAQ

    How many follow-ups can I add?

    Up to three. After the third, the “Add step” button disappears.

    Will a follow-up arrive on Saturday?

    No. Not on Saturday, not on Sunday and not before 9:00 account time — regardless of the main newsletter's schedule (when a follow-up goes out).

    Can I give a follow-up its own subject?

    Yes, enter the subject in the step's email. But then in the recipient's mail app it will look like a separate email rather than a reply in the thread (subject and thread).

    Can I add a follow-up to a newsletter that has already gone out?

    Yes. Add and turn on a step — the app counts the delay from the day the previous email went to each person and sends to those whose time has already come.

    Can I check a follow-up before it's sent?

    Yes: the “Email” button in the step row → “Preview email”, or “Send test email” to yourself. The subject in the preview already has “Re:”, the way the recipient will see it.

    Where to find it and who has access

    Menu
    Contacts → paper plane icon → “Newsletters” → pencil in the row
    Access right
    the “Contacts” window

    Related topics

    Was this article helpful?

    Missing a feature? Tell us.

    We will add it for free if other users need it too.

    If only you need it, we will agree on it separately.

    Article contents

    Suggest an improvement

    Try Elbuz free