↑↓ selectEnter openEsc close

    1. Elbuz

    How to track products by serial number and IMEI

    11 min readUpdated

    Elbuz tracks every device by serial number or IMEI: supplier, location, customer and warranty end date. Numbers are scanned in documents.

    When you need this:

    • A customer brings a phone in under warranty — the number shows if you sold it and to whom.
    • A faulty unit goes back to the supplier — the number shows the supplier and price.
    • A device is missing at a stock count — you see the numbers not on the shelf.
    • A clerk scans the wrong device — you can't sell a number that isn't in stock.

    Where to start: category card → turn on “Serial number tracking”.

    What serial number tracking can do

    • Turned on by category — numbers are required only for electronics; accessories are posted as before.
    • Scanning in the document — the scanner enters the number and Enter, and a counter shows how many are left.
    • Selling by number — you can sell only a number that is in stock at the sending warehouse.
    • Stock count by number — devices that weren't scanned get the “Not found” status.
    • Device history — supplier, customer, warehouse and every document with this number.
    • Warranty — the date is calculated at sale, and a card for the whole purchase is printed to PDF.
    • Warranty claim — accept a device for repair in one click from the number panel.
    A number always has one of three statuses. Only posting a document changes the status; unposting restores the previous one. A transfer only changes the warehouse; the status stays the same.
    receiptsalereturnnot scannedfoundIn stockOutNot found
    • Start
    • State
    • receipt — purchase invoice, stock-in act or a stock count that includes this number;
    • sale — sales invoice, sales receipt, write-off or return to supplier;
    • return — a return from customer with a destination warehouse and the device number;
    • not scanned — the number was in stock, but the stock count did not find it;
    • found — a receipt or the next stock count that includes this number.

    How to turn on tracking

    Turn on tracking by number for products whose warranty applies to a specific device. These are phones, laptops, tablets, PC components (CPUs, graphics cards, SSDs), home appliances and tools.

    Open the category card and turn on “Serial number tracking” next to “Returns allowed”. The switch also applies to subcategories. A product is tracked if its main category or any additional category is marked.

    Where: Directories → Categories → click a category → the “Overview” section.

    Smartphone category card with the Serial number tracking switch and its tooltip
    1Serial number tracking
    2Tooltip
    1. The Serial number tracking switch is on for this category and its subcategories.
    2. The tooltip explains that such products are tracked per unit and cannot be posted without numbers.

    If you sell only electronics, turn on “All products” at the top of the “Serial numbers” window: numbers will be required for every product. The “Marked categories” list there shows where tracking is already on.

    There is no separate switch in the product card. Keep accessories that don't need unit tracking in a separate category. While no category is marked and “All products” is off, nothing changes: documents have no button and are posted as before.

    Products already in stock? Their numbers aren't in the system yet, so you can't sell such a device by number. Run a stock count for these products and scan the numbers — once posted, they become “In stock”.

    How to receive goods and enter numbers

    Numbers are entered in the document card with the “Serial numbers” button. It appears in every document that changes stock: purchase and sales invoice, sales receipt, stock transfer, stock count, stock posting and write-off, return to supplier. With warehouse accounting turned on, also a return from customer.

    Document card toolbar with the Serial numbers button and its tooltip
    1Serial numbers
    1. The Serial numbers button opens the numbers of the document lines.

    The numbers window has a field for each product line tracked by number. The scanner enters the number and Enter, so each number becomes a new line; you can also paste a list from Excel or the supplier's invoice in one go.

    The “entered / required” counter turns green when there are as many numbers as units.

    Receipt numbers window with one number entered, counter 1 / 2
    1Scan field
    2Counter 1 / 2
    3Save numbers
    1. Scan or paste each number on its own line.
    2. The counter shows 1 of 2 numbers entered.
    3. Save numbers stores them; not pressed.

    Click “Save numbers”. The system takes the warehouse from the document card, so choose the warehouse first and then open the window. Saving is refused if:

    • the same number is entered twice — “Number … is entered twice”;
    • the number contains forbidden characters — real S/Ns and IMEIs never have them;
    • there are more numbers than units in the line;
    • a receipt has a number that is already in stock — the same device can't arrive twice.

    Saved numbers don't change anything yet. A device becomes “In stock” only after the receipt is posted. Along with the number, the system records the receipt document, the supplier and the purchase price.

    A document with such products won't be posted until each line has exactly as many numbers as units. The system shows “Serial numbers missing (entered / required): ‹product› — 0 / 2”. This also applies to posting without you — by statuses or through the API.

    Warning that posting is refused because serial numbers are missing
    1Missing numbers 0 / 2
    1. The program refuses to post: no numbers entered, 0 of 2 required.

    A customer order has no button: it only reserves products and doesn't change stock. Numbers are entered in the sales invoice or sales receipt created from it.

    How to sell, transfer and take back

    A sale is made with a sales invoice or a sales receipt. In the numbers window, below the field, there is an “In stock” block: the free numbers of this product at the sending warehouse. Click a number to add it to the line; the scanner works too.

    Shipment numbers window listing numbers in stock for the Galaxy S25 line
    1In stock numbers
    2Counter 0 / 1
    1. In stock: free numbers on the sender warehouse, shown as buttons.
    2. The counter shows 0 of 1 numbers chosen.

    A number that isn't at the sending warehouse won't be saved: “Number … is not in stock at the sending warehouse”. This way a clerk can't scan someone else's device or sell one that's already sold.

    After posting, the number becomes “Out”, and the customer and date are recorded. For a sale, the system also calculates “Warranty until” (how). A write-off and a return to supplier also make the number “Out”, but without a warranty.

    A stock transfer works the same way: you scan the numbers being moved, and after posting they are listed at the receiving warehouse. More about the documents themselves: warehouse documents.

    Return from customer

    The “Return from customer” document itself returns a device to stock if “Destination warehouse” is selected (return to stock). Click “Serial numbers” in the card and scan the number: without it, the return won't be posted. After posting, the sold number is “In stock” again, unposting makes it “Out”, and the sale and return history is kept.

    Without a destination warehouse, the return doesn't change stock, and the number stays “Out”.

    Before taking it back, find the number in the “Serial numbers” window: the panel should show the “Out” status and your customer. If the number isn't there, the device wasn't sold by you or was sold before tracking was turned on.

    How to check that all devices are in place

    In a stock count, scan every number that is physically in the warehouse. Numbers of these products that were in stock but weren't scanned get the “Not found” status after posting. You can see them right away with the “Not found” filter in the “Serial numbers” window.

    A product with no numbers entered in the stock count isn't checked by number: its numbers stay as they were. So you can count one model at a time without scanning the whole warehouse.

    Found the device? Post a receipt or the next stock count with its number, and it becomes “In stock” again.

    How to fix a mistake in numbers

    Numbers can't be changed in a posted document. Unpost it, fix the numbers and post it again. Unposting returns each number to its state before this document: a receipt removes the numbers, a sale puts them back in stock.

    Unposting won't work if a number has already passed through a later document: the system names that document. Unpost in reverse order — the later one first, then the earlier one.

    How to find a device by number

    In the “Serial numbers” window, type a number or product name (a part is enough) or an exact SKU in the search. “Warehouse” and the status chips with counters narrow the list.

    The table shows which supplier the number came from and when, and who it went to and when. The list shows 100 numbers at a time, then “Show more”.

    Serial numbers window with tracking settings, search, status chips and the numbers table
    1Which products are tracked
    2Search
    3Status chips with counters
    4Received column
    5Warranty until column
    1. Which products are tracked by number: the All products switch and the marked categories.
    2. Search by number, product or SKU.
    3. Status chips with counters, including Not found.
    4. Received: date and supplier of each unit.
    5. Warranty until: the warranty end date of sold units.

    Clicking a row opens the number panel: product, warehouse, supplier, purchase price, customer with phone. At the bottom is “Documents”: every posted document with this number; click one to open it. In the “Note” field you can write, for example, the device's condition after a return, and click “Save”.

    Serial number panel for a sold iPhone with supplier, customer, warranty date and documents
    1Supplier and Customer
    2Warranty until
    3Warranty card
    4Documents
    1. Supplier and Customer: who supplied the unit and who bought it.
    2. Warranty until: the date calculated at sale, can be corrected.
    3. Warranty card: prints the warranty card for the unit.
    4. Documents: the receipt and the sale that moved this number.

    AI agents and the AI consultant with access to the “Serial numbers” window can also find a device by number — just ask them in the chat.

    Warranty, warranty card and printing

    “Warranty until” is calculated at the moment of sale: the sale date plus the warranty from the product card (the “Warranty” and “Warranty unit” fields). If the product has no warranty, the date is empty.

    Weeks, months and years are counted as is. If the unit is days or not set and the number is 60 or less, the system counts months: “12” means 12 months.

    If a device has its own warranty, correct the date in the number panel and click “Save”.

    “Warranty card” is a print template for the sales invoice and sales receipt. It prints to PDF the sale number and date, the seller, the customer, a table of all the document's devices with numbers and “Warranty until”, and signature lines. You can print it in two ways:

    • sales document card → the arrow next to “Print” → “Warranty card”;
    • “Serial numbers” window → panel of a sold number → the “Warranty card” button.

    The “Print” button itself doesn't print the card, only the default template. The card's language is the document language or, if none is set, the main system language. The template is edited in print templates like any other.

    The seller comes from your company details. The “Warranty terms” block comes from its “Warranty” field in the “Trading terms” section; if the field is empty, the block isn't printed.

    In the document's printed forms, numbers are appended to the line name, for example “(S/N: 356789104523117)”, in any template, including one you've already customized. To show numbers as a separate column in your own template, use {{ product.serials }}, or {{ product.serial_list }} for one at a time.

    If a customer brings a device in, click “Accept for warranty” in the panel of the sold number: a warranty claim is created with the customer and the product from the sale. Open claims are collected by the “Under warranty” filter. Details: warranty repair.

    Scenarios

    Phone and accessories store

    What to do. Turn on “Serial number tracking” in the “Smartphones” category, and leave cases and chargers in their own categories. Scan receipts box by box, and sales by scanning the box in the sales invoice.

    What you get. Phones without numbers won't be posted, accessories are posted as before. Every phone sale has “Warranty until” and a ready warranty card.

    A customer brings a device in for warranty repair

    What to do. Type the number from the device body into the search of the “Serial numbers” window, open the panel and click “Accept for warranty”.

    What you get. You see whether the device is yours and whether the warranty has expired, and the claim with an intake form is ready (warranty repair). For a claim to the supplier, the same panel shows the supplier, the price and the receipt document.

    A laptop has gone missing from the warehouse

    What to do. Run a stock count of laptops and scan every one on the shelf.

    What you get. The number that wasn't scanned gets “Not found”. It shows which receipt the device came from and which documents it passed through.

    What to do when a document won't post

    Serial number messages
    What you seeWhyWhat to do
    “Serial numbers missing (entered / required): ‹product› — 0 / 1” The line doesn't have as many numbers as units: scanning wasn't finished or the quantity changed after scanning Fix the numbers with the “Serial numbers” button (entering numbers)
    “Number … is entered twice” The scanner read the box twice Delete the extra line and save
    “Number … is already in stock” A receipt has a number you've already received Check the number in the “Serial numbers” window (search)
    “Number … is not in stock at the sending warehouse” The device is already sold, at another warehouse, “Not found”, or was in stock before tracking was turned on Choose a number from the “In stock” block; add old stock with a stock count (stock without numbers)
    “Serial … contains forbidden characters” The number has angle brackets, quotes, an ampersand or a backslash Check that the scanner reads the serial number itself, and enter it again
    “Number … has already passed through document …” After this document, the number went into a later one Unpost the later document first (fixing)
    “The document is posted, numbers cannot be changed.” Numbers of a posted document are locked Unpost, fix, post again

    FAQ

    Can I turn on tracking for one product instead of a category?

    No, tracking is turned on by category or for all products. Move the product to a separate category or add an additional category with tracking on (turning on).

    Can I import numbers from a file?

    There is no separate import button. Copy the column of numbers from Excel or the supplier's invoice and paste it into the field of the numbers window: each line becomes a number.

    Does the system print labels with serial numbers?

    No. Numbers are printed in documents and the warranty card (printing).

    Are numbers linked to warehouse bins?

    No. A number knows its warehouse, but not its bin in bin locations.

    What happens if I turn off tracking in a category?

    Documents with its products are posted without numbers again. Numbers and history already recorded stay in the “Serial numbers” window.

    Can I sell a device with the “Not found” status?

    No, you can sell only an “In stock” number. First return it to stock with a receipt or a stock count with this number (stock count).

    Where to find it and who has access

    Menu
    Directories → Base product catalog → Serial numbers
    Other entry points
    warehouse document card → the “Serial numbers” button
    Turning on
    category card, “Overview” section → “Serial number tracking”
    Access right
    the “Serial numbers” and “Document serial numbers” windows in “Group permissions”
    Prepare
    a barcode scanner; without one, numbers are typed or pasted as a list

    Related topics

    Was this article helpful?

    Missing a feature? Tell us.

    We will add it for free if other users need it too.

    If only you need it, we will agree on it separately.

    Article contents

    Suggest an improvement

    Try Elbuz free