Every night Elbuz pulls Google Ads stats and shows each product's profit after ad spend next to its purchase price and markup. You can also create Shopping and Performance Max campaigns from feed products.
When you need this:
- ROAS looks good, but there's no money — Elbuz shows profit net of ads and purchase cost.
- Budget goes to products with no sales — “Recommendations” lists them for exclusion.
- You need a bestseller campaign — select the leaders; it's created paused.
- Ads run for products you don't have — zero-stock products with ad spend appear in “Needs attention”.
Where to start: Directories → Operations → Google Ads → “Connect Google Ads”.
What the “Google Ads” window does
- Overview — cost, conversion value, ROAS and profit after ads for the period, compared with the previous one.
- Product report and segments — each product with its purchase price, markup, stock and profit; the “Leaders”, “Steady”, “Dead weight” and “No clicks” groups.
- Campaigns — create a Shopping or Performance Max campaign from feed products, pause it, enable it, change its daily budget.
- Recommendations — products that spend budget without sales, at a loss or while out of stock; exclusion from the campaign with a preview.
- The “Performance” label in feeds — leaders and dead weight by profit go into the Google feed's
custom_label.
What you need before connecting
- A Google Ads account with a product campaign — Shopping or Performance Max. Google reports by product only for these two types; Search and Display campaigns appear only in the campaign list.
- Merchant Center linked to Google Ads. Without the link, Google won't create a product campaign.
- Product ID in the feed = SKU or product ID in Elbuz. Google rows are matched to products by
g:id, case-insensitive. It's easiest when Elbuz builds the feed: the Google Merchant feed puts the SKU there itself. - Purchase price in product cards. Without it you see the product's cost and sales, but not its profit after ads.
How to connect Google Ads
To connect, you sign in with your Google account and choose the Google Ads accounts whose stats Elbuz should show. Elbuz never sees your Google password.
1
Connect2
I connected- Opens Google sign-in in a new tab.
- After signing in to Google — go on to choosing accounts.
- Open the “Google Ads” window and click “Connect Google Ads”. Google sign-in opens in a new tab.
- Sign in with a Google account that has access to Google Ads, and allow access.
- Go back to the window and click “I’ve connected — refresh”. The “Settings” section opens.
- In the “Connection” block, select the Google Ads accounts and click “Save”.
After you save, Elbuz immediately loads 90 days of data — this may take a minute. A notification then sums it up: how many Elbuz products were found and how many Google rows have no matching product.
Google may show a “Google hasn’t verified this app” screen. This happens while Google is reviewing Elbuz's access to Google Ads. Click “Advanced”, then the “Go to …” link, and continue connecting.
If you work through an agency manager account (MCC), the list shows client accounts with the note “via <manager account name>”. The manager account itself can't be selected: it has no campaigns.
How to read the overview
The overview answers one question: are your ads making money? The account in the top bar applies to all sections. The period applies to all except recommendations and “Needs attention”: they cover the last 14 days (the “Recommendations for, days” threshold).
1
Period2
Profit3
Comparison4
Needs attention5
Create campaign- The period for all sections; the arrows shift it by the same length.
- Profit after ads, including purchase cost; click to go to products.
- Change against the previous period of the same length.
- What is eating the budget; View leads to recommendations.
- A new Shopping or Performance Max campaign from feed products.
- Period — 7, 14, 30 or 90 days up to today, or custom dates. The arrows shift the period back or forward by its own length.
- Tiles — an arrow and a percentage versus the previous period of the same length; cost, conversion value and profit also show “was …”. Clicking “Cost” opens campaigns; “Profit after ads” and “Products in ads” open products.
- “Needs attention” — how many products have clicks without sales, run at a loss, are out of stock or have no purchase price, plus campaigns with ROAS below target. “View” takes you to recommendations.
- “Product segments” — a ring chart and four links to the filtered product list. How segments are calculated: product segments.
- “Most profitable products” and “Biggest loss-makers” — five rows each; a click opens the product card.
At the bottom of the overview are the last update date and the profit formula. If the Google Ads account currency differs from your main Elbuz currency, it also says that profit was converted at the Elbuz exchange rate at the time of loading.
With several accounts, a “Google Ads account” list appears above the period. In “All accounts” the tiles add up amounts as they are, without currency conversion, so for accounts in different currencies pick one account.
When the data is updated
Google Ads data arrives with a delay of up to a day: Elbuz updates it overnight, not every minute.
| When | What loads |
|---|---|
| After connecting and after changing accounts | 90 days of history |
| Every night, at the “Nightly update time” (02:00 by default) | the last 3 days again: Google keeps adding late conversions |
| The “Refresh now” button | the last 3 days; no more than once every 60 minutes |
1
Accounts2
Disconnect3
Update time4
Update now- Google Ads accounts whose statistics are shown.
- Revokes access and deletes Google Ads data from Elbuz.
- The hour of the nightly update; Elbuz picks the minute itself.
- The last 3 days again; no more than once every 60 minutes.
The nightly update time and the “Refresh now” button are in “Settings” → “Sync”. Elbuz picks the minute within the hour itself.
Stats are kept for 13 months; older days are deleted. If Google didn't respond, the previous data stays as it was, and “Needs attention” shows a “Last sync failed” line with Google's message.
What Elbuz changes in Google Ads
Nothing without your click: Elbuz only reads the reports of the selected accounts. Every change in Google goes through three steps: a button, a preview of what will be sent to Google, and confirmation.
- Create a campaign — it's created paused and spends nothing until you enable it.
- Pause or enable a Shopping or Performance Max campaign.
- Change the daily budget.
- Exclude products from a campaign.
A preview is valid for 30 minutes. After that Elbuz replies “The preview has expired or was already applied” — open it again.
How to disconnect Google Ads
“Settings” → “Connection” → “Disconnect Google Ads” → confirm. Elbuz revokes its access in Google and immediately deletes all Google Ads stats and the campaign list. The campaigns themselves stay in Google Ads as they were.
Along with the stats, the window settings are erased: thresholds, the nightly update time, defaults for new campaigns and the list of products excluded through Elbuz.
Deleted data can't be restored. If you connect again, Elbuz loads 90 days, not all the history you had.
- If Google didn't confirm the revocation, a notification asks you to remove Elbuz access manually at
myaccount.google.com/permissions. - If the Elbuz connection server didn't respond, the data is deleted anyway — click “Disconnect Google Ads” again in a minute.
- If you clear an account's checkbox and save, that account's data is deleted too.
- If you revoke access in your Google settings, the window shows “Connect Google Ads” again.
Without Google Ads data, the “Performance” label in feeds is calculated from Merchant Center stats again.
Scenarios
Are your ads making money at all?
Overview for 30 days → the “Profit after ads” tile. If it's negative, click the tile and sort the profit column in “Products” in ascending order: loss-making products come first.
Clearing out dead weight every week
“Recommendations” → “Clicks without sales” and “Out of stock, but ads keep running” → “Exclude selected”. More: recommendations.
A separate campaign for leaders
“Products” → the “Leaders” segment → select products → “Campaign from selected”. The campaign is created paused — enable it in “Campaigns” once you've checked it. More: campaigns.
What to do when data is missing or looks wrong
| What you see | Why | What to do |
|---|---|---|
| “This Google account has no access to any Google Ads account” | you signed in with a different Google account | disconnect and connect again with an account that has access to Google Ads |
| “Google Ads isn’t connected or access was revoked. Connect it again.” | Elbuz access was removed in the Google account | click “Connect Google Ads” |
| “No data for this period.” | there were no impressions in the period, or the data hasn't loaded yet | choose a 30- or 90-day period; after connecting, wait for loading to finish |
| “Product not found: <ID>” | g:id in the feed matches neither the SKU nor the product ID | put the product SKU in g:id |
| profit “–” | the product has no purchase price, or it's 0 | fill in the purchase price in the card |
| “Updated recently. Next update available in N min.” | “Refresh now” works once every 60 minutes | wait the time shown |
FAQ
Why don't the numbers match my Google Ads account?
Elbuz updates data once a day, and Google keeps adding conversions for up to three days. Compare periods that ended yesterday or earlier. Profit is calculated in your main Elbuz currency at the Elbuz exchange rate.
Will Elbuz change anything in my campaigns on its own?
No. Every change takes your click, a preview and confirmation (what Elbuz changes).
Can I connect several Google Ads accounts?
Yes, select them in “Settings” → “Connection”. Choose the account for the report in the list above the period.
Can I see Search campaigns?
Yes, in the “Campaigns” list with cost and conversions. Google reports by product only for Shopping and Performance Max.
Will a manager see ad spend?
Only if their group has access to the “Google Ads” window. The Google Ads columns in the product list and the block in the product card are also visible only to those with access to the window.
Where to find it and who has access
- Menu
- Directories → Operations → Google Ads
- Other entry points
- “Feed quality” → “Feed errors” → “Open Google Ads”; the “Google Ads · 30 days” block in the product card
- Access right
- the “Google Ads” window in group permissions; always open to administrators
- Prepare
- a Google Ads account with a Shopping or Performance Max campaign, linked to Merchant Center
Related topics
- To find products where ads lose money — Google Ads product report.
- To create a campaign from selected products — How to create a Google Ads campaign from Elbuz.
- If you don't have a Google feed yet — How to build a Google Merchant feed.
- If Google rejects feed products — Feed quality.
